REPAIR/ MAINT OF DAMAGED FLOOR, WALL TILES, JOINERY AND ALLIED WORKS, REPAIR/ MAINT OF BLDG ROOFS INCUDING ROOF TREATMENT, REPAIRS OF CHAJJAS, PARAPETS, ATT PLINTH PROTECTION FALSE CEILING, ROOFING AND ALLIED WORKS, REPAIR/ MAINT INCLUDING REPLACEMEN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm/450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base for flooring etc., complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick, light grade, (square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8mm thick, light shade, (square/rectangular), polished, area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and refixing in same opening, complete all as specified and directed.

S&F factory made 100% solid WPC (wood polymer composite) door frame 125mm x 80mm double rebated mullein section made from wood polymer composite ( single extruded process) material comprising of virgin PVC polymer of 'K' value 57-60 (suspension grade), calcium carbonate and natural fiber (wood powder/rice husk/wheat husk) and non toxic addictive fabricated with meter joint after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity (screw withdrawal strength of (min 990 N), minimum compressive strength of 58 N/mm2, modules of elasticity 900 n/mm2 and resistance to spread of flame of class A category with property of being termite/bore proof, water/moisture proof & fixed imposition with SS dash fasteners/hold fast of required dia and length, all as per specifications drawing, complete all as specified and directed. Note :- (i) Manufacturer test certificate and authentication should be produced by the contractor from the manufacturing company. (ii) Hold fast or dash fasteners shall be paid separately.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F mild steel holdfast made up of flat iron 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S& F 30mm thick flush door shutter, membrane doors, decorative finish on one side duly finished and polished on other side all as per manufacturers directions, as per tint/colour including necessary teak wood lipping’s, complete all as specified and directed.

S&F 30mm thick factory made glazed and skelton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass/guage etc, complete all as specified and directed.

S&F 100mm size mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs, mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250mm, complete all as specified and directed.

M&L for preparation new or previously untreated of wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 75mm (2 levers), complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows with necessary nails and fillets), complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg, complete all as specified and directed.

Taking out old damaged tarfelt or membran of any description including screed bed or bedding layer and removing of debris to a distance exc. 100m and n. exc. 250m and cleaning roof surfaces to remove all loose dust etc., roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water using wire brush, brooming down and applying the following treatment all as directed in order of precedence as stated: (a) Brushing neat cement slury with 3.0 kg of cement per Sqm. (b) 15mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound as per manufacturer instruction on existing roof surface true to level. (c) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.11 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. (iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017. (iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. (vi) The work shall be executed through authorised applicators of original manufacturer only. (viI) WPC shall be measured and paid separately as 'supply only'.

S & F in repair 75mm bore PVC (SWR) soil waste, single socketed, in any length with sealant rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) soil waste, single socketed, in any length with sealant rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles , complete all as specified and directed..

M&L for brick work with flyash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed.

M&L for brick work with flyash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) in half brick thick, complete all as specified and directed.

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

M&L 15mm thick rendering in CM (1: 6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L 5mm thick rendering in CM (1:3) on fair faces of ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces wall surfaces and applying two coats of oil bound distemper over and including a coat of 2 to 3mm thick wall care putty to obtain a smooth surface including making good any undulation on the surface, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer over and including 2 to 3mm thick wall care putty to obtain a smooth surface including making good any undulation on the surface, complete all as specified and directed.

M&L for complete removal of existing treatment of old surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for PCC (1:2:4), type B-1. (using 20mm graded crushed stone aggregate) as in benching. coping, bed plate, lintel, benching/foundation etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M & L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) for foundation, filling, mass concrete, making good to disturbed surfaces of road/hardstanding/plinth protection etc, complete all as specified and directed.

Dismantling asbestos cement corrugated or semicorrugated, etc sheets in roof coverings, complete all as specified and directed.

Dismantling of timber scantlings 40 sqcm and over in section, in any position, complete all as specified and directed.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 1979 grade St.-240, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed.

M&L for preparing new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), over a coat of red oxide primer, complete all as specified and directed.

S&F for 605 x 605mm GI frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including providing 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/aluminium framework with screws, 60x 60cm in size, fixed with nails to timber framework or with staples on snap grid including dismantling of old unserviceable ceiling boards of any description, including cover fillets, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work, complete all as specified and as directed.

M&L for expended metal exc 4 kg, cut of lenth, bent to shape required and typing with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and directed.

M&L for providing and injecting chemical emulsion for post construction antitermite treatment along external wall where the apron is not provided using chemical emulsion (ATT chemical) @ 7.5 litres/Sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding ,complete all as specified and directed.

M&L for post construction antitermite treatment at points of contact of wood work by chemical emulsion (ATT chemical) (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

Uprooting grass/weeds/plants up to 30cm depth by scrapping soil in order to make free ground from all sort of vegetation and hand packing carefully by packing round pebbles approximately of size 20 to 40mm after carefully picking form heap of pebbles/stones, complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in sub-base, floors and pavings, plinth protection etc, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc. 250 ltr & n. exc. 500 ltr and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc. 500 ltr & n. exc. 1000 ltr and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, heavy duty, including all conduit accessories with and including concealed pressed steel terminal box of suitable size factory made with top cover of ISI marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole including taking down old unserviceable point wiring of any type, size/description and from any position, complete all as specified and directed. Note : Chase cutting including making good shall be measured and paid seperately.

All as per item No 73.00 here-in before but for 3 pin 5 Amp socket point on same board, complete all as specified and directed.

All as per item No 73.00 here-in before but for 3 pin 5 Amp socket point on independent board, complete all as specified and directed.

All as per ser item No. 73.00 here-in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed.

All as per item No 73.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 15 Amp 3 pin socket outlet point including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire, complete all as specified and directed.

S&F for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed.

S&F switch and socket combination 2 in 1, 6 Amp flush type, complete all as specified and directed.

S&F switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F ceiling rose PVC / Polycarbonate, isolated body, 3 phase including PVC mounting block white/ivory finish, complete all as specified and directed.

S&F lamp holder, PVC / Polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type, AC 230 volt suitable for any type of ceiling fan all as specified and directed.

S&F bell push, flush type, 5 Amp, complete all as specified and directed.

S&F bell electric, heavy duty, ding dong type, 230 volts single pole, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit heavy duty and accessories of not less than 25mm dia ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 sqmm single core PVC insulated unsheathed copper earth continuity, including making good disturbed surface as per existing surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed. Note: (i)Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.

All as per item No 87.00 here-in before but drawn through PVC casing/caping surface type, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 8 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position including taking down old unserviceable DB, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 40 to 63 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing , complete all as specified and directed.

S&F MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing, complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades,shelves, lintesl etc and cutting chases for cncealed water tubing or conceales conduit wiring etc and making goor cutting not exc 10cm girth in brick walls, complete all as specified and directed.

S&F MCB Single Pole & Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, with overload and short circuit protection, fixed in proper position including connection and testing, complete all as specified and directed.

S&F MCB 4 pole, 40 to 63 Amps, 415 volts, 10 KA, 'C' curve with overload and short circuit protection, fixed in proper position including connection and testing, complete all as specified and as directed.

S&F exhaust fan, metal body, AC, single phase, 230V of size 300mm sweep 900 RPM complete with louvers and shutter and mounted in suitable opening arrangement in wall and coonecting up including 3 core PVC insulated copper conductor flexible cable of suitable size from ceiling rose to fan including breaking of brick wall and making hole for fixing of exhaust fan including grouting of bolts and making good to distrubed wall in CM (1:4) white washing matching with existing colour, completes all as specified and directed.

All as per item No 100.00 here-in before but 250mm sweep PVC body, complete all as specified and directed.

S & F LED light fitting 1 x 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable light fittings, complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old unserviceable light fittings, complete all as specified and directed.

S & F 25 Amp double pole (DP) switch with indicator, complete all as specified and directed.

S & F 25 Amp double pole (DP) switch, modular boxes, 8 module complete with front plate high glass and frame concealed to the wall and suitable for fixing, complete all as specified and directed.

Supply and fix LED high bay light fitting 150 watt indoor type white colour fixing on high rise steel trusses including mounting arrangement fixed on celling with necessary hook/chain/hanging the fitting from ceiling/roof/angle Iron frame structure including connecting with 2.5 Sqmm single core multistranded copper conductor cable drawn through PVC flexible conduit from ceiling rose/connector to fitting, fixing on hanger/indoor type sports shelter complete with driver, complete all as specified and directed. Note: Necessary scaffolding for fixing of light into high rise hanger shall be included in quoted rate.

Supply and draw sub main wiring in repairs of two run 6.0 sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade, drawn through and including PVC conduit heavy duty and accessories of not less than 25mm dia ISI marked including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 6.0 sqmm single core PVC insulated unsheathed copper earth continuity, including making good disturbed surface as per existing surface including taking down existing sub-main wiring, any numbers of wire and any size, complete all as specified and directed. Note: (i)Two runs of single core cable with one run of earth continuity conductor including PVC conduit & accessories shall be measured and paid as one length.

S&F radio power saver wireless, ceiling mounted, round shape, occupancy/vacancy sensor, battery powered, passive infrarred sensor (PIR), switched based on sensing human body heat, 360 degree coverage including taking down existing one and deposited to AGE E/M store yard, complete all as specified and directed.

S&F in replacement of LED aviation obstraction lights, heavy duty IP 65/66 (double light) red colour, metal body with in built photo cell switch for automatic operation of lights including connecting cable from nearest electric point and mounting arrangement as per existing, complete all as specified and directed.

Note: An amount of Rs.55,852.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

DEEP NIRMAN (BID ID -3361703)

M/S ANIL KUMAR BAUL (BID ID -3360330)

M/S SANMILAN NANDI (BID ID -3361443)

M/S MANODEEP CONSTRUCTION (BID ID -3357144)

M/S ASHOK ENTERPRISE (BID ID -3357140)

MAA TARA TRADING (BID ID -3360176)

MAJUMDER ENTERPRISE (BID ID -3361568)