WORK 3 ANGANWADI BUILDING KEELACHARI PANCHAYAT

Amount

Construction Of Anganwadi Building @ Keelachery in Keelachery Panchayat.

Earth work excavation in all classess soil with initinal lead and lift as per SS 20B etc complete.

Filling with M sand including cost and conveyance of sand to work site including all labour charges for filling etc complete - rate for 1 cu.m

Cement concrete 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials to site including all labour charges for filling etc complete - rate for 10 cu.m

Centring for sides and soffits including cost and conveyance of all labour charges etc complete.

Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication.

R.C.C. 1:1.5:3 mix using 20mm HBG metal including cost and conveyance of all materials to work site and all labour charges etc.complete - rate for 10 Cu.m

BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications.

Special ceiling plastering with cement mortor 1:3 mix to 10mm thickness including cost and conveyance of all materials to site and all labour charges etc. complete rate for 10.00 sq.m

Plastering with cement mortor 1:5 mix 12mm thickness including cost of conveyance of all materials to work site and all labour charges etc. complete rate for 10.00 sq.miyarangam.'!B128

Providing Granolithic Pattern Floor finish with plain cement concrete 1:2:4 using 10-12 mm ISS HBG metal and top rubbed smooth etc., complete complying with standard specification as directed. (25mm thick)

Paving the floor tiles of ceramic tiles of size 0.30 x 0.30 finished with C.M 1.3 mix including all cost and conveyance and pointing with the same colour mortor with white cement including all other charges etc.,

SUPPLY AND FIXING OF GLAZED TILES including cost and conveyance of all materials to site and all labour charges etc. complete

Pressed Tiles over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid into a single layer and consolidate to required finished

Fabrication and Supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5mm equal M.S angle and Shutter frame made of 25x25x5mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G Plate etc.,

Fabrication and Supply of Mild Steel Window of any size with single leaf outer frame made of 35x35x5mm equal M.S angle and Shutter frame made of 25x25x5mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G Plate etc.,

Distember two coats over one coat of primary coat including cleaning preparing the surface one coat of primer. For Inner and ceiling

Emulsion two coats with Exterior emulsion over one coat of primary coat including cleaning preparing the surface For Outer wall surface

Painting in two coats with Over the new Iron work such as Steel Doors,Windows,Ventilator etc., with best approved Synthetic enamal paint of approved colour over the existing priming

Wiring with 2x1.50 Sq.mm (22/0.30) PVC insulated SC unsheated Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick Hylum sheet cover with TW box cover with TW box and 5A FT switch with continuous earth connection of 14 SWG TC wire for making good of the Concealed portion with suitable colour for PVC concealed Light Point / Fan Point SD25

Wiring with 2x1.50 Sq.mm (22/0.30) PVC insulated SC unsheated Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TWswitch with 3mm thick Hylum Sheet cover 5 A 3 Pin non interlocking CS Plug with continuous earth connection of 14 SWG TC wire for making good of the Concealed portion with suitable colour for concealed PVC Plug Point SD 12

Supply and run of 2 of 6.00 Sq.mm (22/0.3) PVC insulated SC unsheated copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains SD 66

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheated copper conductor of 1100 V grade in 25mm dia GI Pipe (Class 'B') suitably bent at both ends with necessary angle Iron upright and end supports for mains SD 67

Supply and Fixing of 40W TUBE LIGHT SD 88

Supply and fixing of 1200mm (48") AC Ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp.SD 107

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}

RAMASAMY RADHAKRISHNAN