Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.2 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹65.6 L+₹4.6 L (7.45%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹70.8 L+₹9.7 L (15.9%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹71.0 L+₹9.9 L (16.2%)Rejected-Finance HARIPUSHPA APARTMENT BUILDING NO E 1 FLAT NO 01 REST CAMP ROAD DEOLALI CAMP 422 401 | DEOLALI CAMP | NASHIK | MAHARASHTRA | 422401 | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹72.1 L+₹11.0 L (18.0%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹93.4 L
EMD Value
₹1.6 L
Closing Date
14 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE DEOLALI
HQ CWE DEOLALI, ONSLOW ROAD, DEOLALI (MH)
AS PER TENDER DOCUMENTS
2022_MES_545476_1
87319/E8
Open Tender
Civil Works
Item Rate
270 days
AHMEDNAGAR
AS PER NIT
7 documents required · 7 mandatory
₹1,000
Yes
GE SOUTH AHMEDNAGAR
₹1.6 L
Yes
1 Nov 2022
16 Aug 2022
16 Sept 2022
16 Aug 2022
14 Sept 2022
8 Sept 2022
17 Aug 2022 - 23 Aug 2022
Amount
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid and bedded in any mortar complete all as directed.
Dismantling of floor,hearth or wall tilling including cement mortar bedding ( but not backing) removing rubbish off the premises all as directed.
Demolition of RCC in Ground floor, columns and pavings n.exc 15 cm thickness (below or above gound level)
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified.
Dismantling of wrought iron or mild steel work of any description complete all as specified and directed.
Fixing only framed work such as grills gratings etc with ends of bars shouldered and or forged into spikes framed guard bars, railings and similar work conforming to Fe.290 dge -E-165 complete all as specified and directed.
M&L for use and waste of form work for faces of walls, retaining walls, abutments parapets and staircase railings and similar work all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr in depth for foundation etc or for shafts, walls cesspits, manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil.
Excavation over area not exceeding 1.5 m deep and getting out in soft/loose soil etc complete.
Returning filling, in including spreading, levelling, watering and well ramming in layers n exc 25cm thick in soil all as specified and directed.
Removing excavated material (Soil) exc 250m but n.exc 500m and depositing were directed at a level n.exc 1.50m above the starting point all as specified and directed.
M&L for hardcore of gauge exc 63 mm but n.exc 100 mm ,deposited, spread and levelled in layers complete all as specified and directed.
M&L for moorum filling in floors or paving laid in layers n.exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (40mm graded stone agg) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L for use and waste of form work for column footing and sides of plinth beam, bands, cantilevers, bressumers, lintel over 1.5 m span all as specified and directed.
M&L for 500 D TMT bars 10 mm dia and over, cut to length, bent to shape required, including crankng, bending spirally for hooping for columns hooking ends and binding with and dincluding mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed.
All as per item no. 16 above but 5mm dia and over, upto and including 10mm dia as in stirrups, spacers and binders.
M&L for PCC 1:3:6 solid block walling exc 10 cm in width built in cement mortar 1:6 complete all as specified.
M&L RCC 1:2:4 type B1 (using 20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc.
M&L 75 mm thick plain cement concrete 1:3:6 type C-1 (20mm graded stone agg) as in plinth protection all as specified and directed.
M&L for Non skid ceramic tiles, coloured, tiles 7 to 8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match, as in floors including 15mm thick screed bed in cement mortar 1:6, all as specified and as directed.
M&L for Non skid ceramic tiles, coloured, tiles 7 to 8mm thick, area of each tile exc 0.18 sqm but not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement with pigment to match, as in floors including 15mm thick screed bed in cement mortar 1:6, all as specified and as directed.
M&L Glazed ceramic tiles, coloured, 350mm x 250mm size, 7mm thick, set and jointed in neat cement slurry and pointed in white cement with pigment to match, on vertical surfaces such as dado/ skirting, etc., over and including backing coat of cement mortar 1:4, 10mm thick all as specified and as directed.
M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for screed bed or bedding layer of mortar 15mm thick (CM 1:6)for laying floor finishes to receive tiles and stone slab all as specified and directed.
Rounding of edges of stone slabs one edge such as in steps cooking platform and other similar situations all as specified and as directed.
Taking down cement plaster n brick/ stone wall/ concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc. all as specified and as directed.
M&L for rendering 15mm thick on block masonry surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:6 on wall surfaces finished even and smooth without using extra cement with sagol finish all as specified and directed.
M&L for rendering 10mm thick in cement mortar1:4 on ceiling surfaces finished even and smooth without using extra cement with sagol finish all as specified and directed.
Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as bands,sunk panels, cornices, skirting drip moulds, and similar work n.exc 15cm in width or girth including cutting to edges all mitres and stopped ends, etc all as directed.
M&L for two coats of cement based paint on newly/ old plastered surfaces incl preparation etc complete on wall
M&L for two coats of oil bound distemper on newly plastered surfaces of walls over 3mm thick wall care putty incl preparation of surfaces all as directed.
M&L for complete removal of existing treatment and two coats of OBD over 3mm thick wall care putty on plastered surfaces of walls including preparation of surfaces all as directed.
M&L for 3 coats of white wash on newly/ old plastered surfaces of ceiling incl prepaartion etc complete.
M&L for special treatment to sunken slab floor including WC trap etc cleaning and preparing the surface area for carrying out memebrane water proofing treatment then injection groutingin weak areas on the concrete surafce with cementitious grout and applying 10mm thick cement plaster in cement mortar 1:4.Then providing and laying mineral top APP (Atactic Polypropylene polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with Non woven polyester matt consisiting of a coat of bitumen primer for bitumen membrane @ 0.40litre per sqm by the same membrane manufacturer of density 25C ,0.87-0.89 kg per litre and viscosity 70-160cps. over the primer coat the layer of membrane shall be laid using Butane Torach and sealing joints etc and preparing the surfaces complete, and providing PCC 1:5:10 type E 2 using 40mm graded stone aggregates in sunken slad and 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as base, 40mm bore GI pipe, light grade of lenght not less than 50cm as spout , non skid glazed ceramic tiles as per existing pattern/ size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests / pedestal pan incl seat cover, white, area of WC exc 1.00 sqm but n.exc 5.0sqm etc after dismantling the existing sunken floor etc complete all as specified and as directed, NOTE:Work has to be carried out strictly by the aunthoicated applicator of the manufacturer and as per manufacturers specifications .
M&L for cement screed 10 mm thick in cement mortar (1:4) on concrete surface finishing the surface even and fair using WPC @ 3% by weight of cement complete all as specified and directed. (WPC will be paid seperately).
M&L for APP polythene membrate minimum weight 3kg/sqm and minimum 3 mm thick reinforced with polyster non wooven fabric including aluminium foil on top weighing not less than 150 gms/sqm laid on primed surfaces by forced application including bituminious primer @ 0.30 Litr/Sqm complete all as specified and directed.
Supply only water proofing compound complete, ISI mark all as specified and directed. Note:- Contractor has to submit original purchase voucher of Water proofing Compound to the Engr-in-Charge.
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (with out taking off shutters from the frame) all as specified and directed.
Taking down shutters of any description exc 1.0sqm but not exc 2.0 sqm each all as specified and directed.
S&F mild steel 10mm square bars to steel windows / ventilators as in guard bars conforming to FE -290 Gde E-165 all as specified and as directed.
S&F in repairs framed work such as grills, gratings, etc with end of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railigs framework all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description ) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones all as specified and as directed.
M&L for 4mm thick sheet glass, ordinary quality, glazing with oil putty in square not exceeding 0.50 Sqm in each pane all as specified and as directed.
M&L for 4mm thick figuredt glass, ordinary quality, glazing with oil putty in square not exceeding 0.50 Sqm in each pane all as specified and as directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples etc
M&L refixing in same openings shutters of any description exc 1.0 sqm but not exc 2.0sqm each alla s specified and as directed.Note : Refixing includes taking down , easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws etc.)
S&F 35mm thich 2nd class hardwood factory made plain framed panelled door shutters with lock and rail and panel of 9mm BWP commercial ply or 12mm veneeered particle board with commercial veneering on both faces. The size of rail and stiles as per IS 1003 (part-i) klin seasoned and chemically pressure treated all as directed.
S&F 35mm thich 2nd class hardwood glazed and skeleton door shutters, open rebate and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 (a) all as directed..
S&F in repairs Pressed steel frame of size 125 x 60 mm. for door with one or more rebates including necessary fixing lugs, hinges, lock, strike plate etc complete all as specified and directed.
S&F PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in openings as per specification and drawing all as specified and as directed
S&F Factory made solid PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for style and plain color PVC sheet for top rails & bottom rail on either side and as gap insert for top rail and bottom rails paneling of plain colour PVC sheet to be fitted in the M.S frame welded / seated to the style and rails with suitable PVC sheet beading and jointed together with solvent cement all as specified and directed.
S&F 100mm long butt hinges, medium weight, stainless steel all as specified and directed.
S&F 200mm long mild steel barrel tower bolt, stove enamelled black, with bright bolt all as directed.
S&F 150mm mild steel pressed handles oval type stove enamelled lack all as directed,
S&F 300mm long mild steel sliding door bolts, plate type , stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate all as directed.
S&F 200mm long aluminium anodised barrel tower bolt, of extruded sections all as directed.
S&F 150mm long aluminium anodised handle, cast type all as directed.
S&F 150mm long floor door stopper of aluminium body and tonuge anodised with hard drawn steel spring all as directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of rex oxide primer all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint r all as specified and directed.
M&L for preparation of new or previously untreated woodenl surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.
M&L plian fillets, square, rectangle or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6sqcm of 2nd class hardwood all as specified.
M&L plian fillets, square, rectangle or triangular in section, wrought, secured with nails or brads, sectional area exc 6 & n.exc13sqcm of 2nd class hardwood all as specified.
M&L plian fillets, square, rectangle or triangular in section, wrought, secured with nails or brads, sectional area exc 13 & n.exc 25 sqcm of 2nd class hardwood all as specified.
S&F continous (piano) hinges, mild steel, bright finish or electrogalvanised (width of flap 30mm ) all as specified.
S&F 125MM Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified.
S&F 125mm long aluminium anodised handle, cast type all as directed.
S&F in repairs mild steel 20mm dia decorative powder coated curtain rods with fixing brackets. Rollers, etc all as specified and directed.
Dismantling of water tanks of capacity n.exc 500ltrs and removing from site all as specified and directed.
S&F rotational moulded poltthene water storage tank triple layerd ISI Marked 1000ltrs capacity vertical with closed top and hoisted and fixed in position all as specifiedin SSR part -I.
M&L in repairs gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm bore all as specified.
S&F ball brass valve, high pressure with polythene float and flynut complete, screwed for iron pipes or brass ferrule and fixed in 20mm dia bore pipe all as specified and directed..
Taking down 15mm dia GI tubing including all connected fittings of any dia and in any position including cleaning for and refixing the serviceable pipe all as directed. .
All as per item No 76 above but 20mm dia pipe
S&F 15mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed complete to walls / ceillings all as specified and directed.
All as per item No 78 above but 20mm dia pipe
Taking down rain water pipes (any size or pattern) including all fittings, heads, shoes, bends etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)
S&F 110mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls all as directed.
S&F 110mm dia PVC SWR vent cowl all as directed.
S&F 110mm dia PVC SWR branch piece double (single Y) equal or unequal all as directed.
S&F 110mm dia PVC SWR bend any radius all as directed.
S&F 75mm dia PVC (SWR) bend with access door any radius all as specified.
S&F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed
S&F for chromium plated grating 100mm dia etc complete.
S&F 15 mm bore Bib taps fancy type chrouminum plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc complete.
S&F 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repairs PVC connections 15 mm dia with PTMT nuts of length 450 mm
S&F Towel Rail 20mm dia,600 mm long of aluminum anodised and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms)
S/F in repairs vitreous china wash basin, white , flat back size 550 x 400 mm excluding taps, etc & including waste pipe , 15mm PVC connection 600 mm long & brackets complete.
S & F in repairs 10 ltrs Vitreous china valveless syphonic action type flushing cistern, low level, white inlet ball valve float and handle includingbrackets, flush pipe, 15 mm PVC connection 600 mm long.
Supply & fix in repairs WC Orissa pattern size 580 X 440 mm white with integral foot rest WC incl 'P' or 'S' trap .
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .