Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC | L1 | Accepted-AOC Found L1 | |
| 2 | L2₹12.2 L+₹17,301 (1.44%)Rejected-Finance | L2 | Rejected-Finance Not Found Lowest | |
| 3 | L3₹12.3 L+₹31,356 (2.61%)Rejected-Finance | L3 | Rejected-Finance Not Found Lowest |
Tender Value
Refer Docs
EMD Value
₹24,000
Closing Date
28 May 2020, 11:00 amClosed
CO, 19 Engr Regt
19 Engr Regt, PIN-914019 C/O 56 APO
PROVN OF 08 KM AT TRACK
2020_ARMY_341751_2
320/QTN/PTK/2020-21/05/OPW
Open Tender
Miscellaneous Goods
Buy
30 days
POOH
Please refer Tender Document
2 documents required · 2 mandatory
₹0
₹24,000
Yes
13 Jun 2020
22 May 2020
29 May 2020
22 May 2020
28 May 2020
22 May 2020
22 May 2020 - 27 May 2020
Amount
Scope of Work - Constr of AT Track 08 Km Long and 1.8 Mtr width from Lamoche Dogri to Ganngthang La. Minimum two passing place 3.00 Mtr wide, at least 5 to 6 Mtr long will be provided at every 1Km. The ruling gradient of the track will be 1:6 or less. The undermentioned items will be procured for reinforcement/ Constr of Breast walls/ track improvement.
Mesh Container - Portable, collapsible protective wall gabion cage boxes made of Galvanized welded mesh frame (02 x cell per set) of size 1.22 x 0.600 x 0.66m (Length 4 feet, Width 2 Feet and Height 2 Feet) shall be used at suitable locs for making Breast walls. Gabion mesh will be made of 4mm dia Hot dip galvanised Low carbon steel wire confirm to BS 1052 145 GSM Alu-Zinc coated prime quality raw material confirming to BS/EN 10224-2. Wire Tensile 540-770 N/MM2, 100% defect free. Gabion frame Mesh size 76.5mm x 76.5mm. Mesh Tensile 7% of wire tensile. Mesh frame edge will be spiral hinged through 20mm dia spiral made of 4mm dia galvanised stretchable wire for joining to ensure easy folding and unfolding and 2' In length afte folding. Tolerance: Panel + 1mm in length Elongation approx 5%. Weight of Panel 10.10 Kg/Set 8 Nos high tensile stiffening will be provided with each cage. The cage bos will have inner lining of non woven geotextile. The geotextile will be 3mm thick with 300 GSM in heavy duty non woven polypropyiene. (Make HESCO Bastion Ltd/ STAR/A1 or Equivalent)
Angle Iron 60 x 60 x 6mm. Angle iron Made of Mild steel angle 65 x 65 x 6mm 1880mm long for supporting of Hesco Bastion conforming to IS 2062-2011. All angle picket shall be applied with two coats of synthetic enamel paint of sand colour over a coat of red oxide primer. Weight of the Mild steel angle picket shall be 5.4Kg/RM. All angle iron shall be fabricated duly slotted both side at the regular intervals 150mm with shoe at end of 120mm. Tolerances will be as per IS 1852-1985 Make TATA/SAIL/JINDAL.
Non-explosive demolition agent which should be silent and does not produce vibration the way a conventional explosive, does the explosive will be purchased under Act 1884 (4 of 1884) in bag of 0.5 Kg/1.0Kg size. (Make: Crackamite/Splitomite/Prudent Rock Demolition Solution or Equivalent)
PVC SWR pipe of 110 mm dia conforming to relevant IS Code Make SUPREME/RELIANCE/PRINCE/DIPLAST PLASTICS
Cement OPC 43 Gde conforming to relevant IS Code Make : Ambuja, ACC, BIRLA, ULTRA TECH, JK CEMENT or equivalent
Curshed Stone Aggregate of size 12 to 20mm graded
Curshed Stone Aggregate 40mm graded
Binding wire
PPGI Sheets 10' long and 0.50mm thick conforming to relevant IS Code. Make TATA, Jindal, SAIL or Equivalent
Ballies 10' long dia 6"
Water tank Collapsible 200ltr Make Joemillars, Ftank, Polymer or Equivalent
Quick Setting Compound in 20Kg Pack conforming to relevant IS Code. (Make : DR. Fixit/Fosroc/PIDILITE or Equivalent )
Tools and Plants
Crowbars made of heavy duty hot forged and tempered with angle beak on both sides and hexgonal bar of minimum 16mm side to side and length 500mm after bending Make TATA, SAIL,JINDAL
Galvanised iron Pan motor (Tasla) 18 gauge, 16" dia minimum weight 02 Kg
Measuring Tape 50Mtr Make Freeman, Foster, Yuri or Equivalent
Showel GS heavy duty with helves
Picks axes with chiesel, point and helves
Powrah with Handle
Hand Gloves Water Proof
Double Wheel barrow
Brick trowel steel 305 mm Make Taparia
Plaster trowel with wooden handle ISI Marked 2.00 Nos 35.00 70.00
Water Bucket Steel 13" dia Make Tata or equivalent
Water tube level 30mtr long
Sledge Hammer 3kg with handle
Gasoline Rock drill machine with Bits Make Atlas Copco, Cobalt, Haryson and equivalents
Portable Generator Set 2.5KVA Make Honda, Greaves, Kirloskar
SAVLAL ENTERPRISES
LALIT GASES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .