Repairs to joinery, plastering, flooring, plumbing, sanitary fittings and misc repairs for Nursing, MH Offr Mess pers line, LAO, Inf and FD Hosp and Santan Singh Enclave incl md accn under AGE B/R-II, GE Gurdaspur.

Amount

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair including taking down old cement plaster of any description, raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement including taking down old cement plaster of any description, raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement including taking down old cement plaster of any description, raking out joints, hacking for key scrubbing down with water and removal of rubbish off the premises complete all as specified and directed

Material and Labour for repairing to RCC projections, chajjas, roofs, facia, ceiling etc. by scrapping, cutting, chiseling, de-rusting and cleaning exposed reinforcement of damaged loose RCC surfaces and applying neat cement slurry @ 3kg/sqm and filling the surfaces with cement sand mortar 1:3 or cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) using coarse sand in layers as required and reinforced with 8mm dia. TMT bars in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces at height upto 3.5m complete all as specified. Note:- Cost of formwork shall be deemed to be included in unit rate quoted by the Contractor.

All as per Srl item No 4 above but bldg height exc 3.50m n. exc. 7.00m.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

M&L for prepration of newly plastered or un plastered surfaces of wall two coats of oil bound distemper over a one coat of primer complete all as specified and directed.

M&L for prepration of newly plastered or un plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.50 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 09 above but exceeding 1.50 Sqm and not exceeding 4.00 Sqm

Taking down Shutters of any description of size exceeding 1.00 sqm and not exceeding 2.00 sqm each complete all as specified and directed

Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each. & refixing in the same opening after rectifying the defect.

S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, painting shall be measured and paid for separately

S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. ISI Marked.

S&F IInd class hard wood (Holock) Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F MS framed work as in chowkats, door or gates of angle or other section with gusset plates,rail, braces, etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F in repair Anodised aluminium powder coated frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repair anodised aluminium door shutters, aluminium section weighing average not less than 1.00kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F in repair anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples, wooden beads complete all as specified and as directed

Hacking out old broken glass panes of any thickness description from wooden frame or Aluminium frame or steel frame,or brick surrounds, glazed with putty or fixed with beads , Alumunium clip and prepared to receive new glass panes complete all as specified .

S&F Sheet glass, 3mm thick, ordinary quality, in squares, not exc 0.50 Sqm in each pane fixed with oil putty complete all as specified and directed.

All as per Srl item No 28 above but figured glass pin head type & glazing with oil putty

S&F Sheet glass, 4mm thick, ordinary quality, in squares, exc 0.50 Sqm in each pane fixed with oil putty, aluminium glazing clips, rubber packing complete all as specified and directed.

S&F for 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed all as specified and directed.

S&F for 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws complete all as specified and as directed.

S & F for 150mm size mild steel pressed handle, oval type, stove enamelled black complete all as specified and as directed

Supply and fix for 125mm size aluminium handles, extruded, anodised, fabricated type complete all as specified and as directed.

Supply and fix in repair for 125mm size aluminium handles, extruded, anodised, fabricated type complete all as specified and as directed.

S & F for 150 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

S & F in repair for 150 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

S&F for 150mm size aluminium handles, anodised, fabricated type complete all as specified and as directed.

S&F for butt hinges of size 100mm, medium weight, cold rolled mild steel fixed with metal surface through bolts, screws or welding complete all as specified and as directed.

S&F for floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring, overall length of cover plate 140mm all as specified and as directed.

Material and labour for 18/19mm thick block boards grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frame-work as in shelves, shutters and partitions of built-in cup boards/ kitchen CB including dismantling of wooden boarding any description and in any position fixed with nails complete all as specified and as directed.

External teak wood lipping, 6mm thick to 18/19 mm thick block board or veneered partical board, fixed with nails including french polish etc. complete all as specified.

S&F 100 mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair, 300mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

M&L for two coats of synthetic enamel painting over one coat of primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surface complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of primer on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surface complete all as specified and directed.

S&F non skid ceramic dark/ light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 including taking down of old existing treatment & plaster complete all as specified and directed.

S&F non skid ceramic dark/ light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 including taking down of old existing treatment & plaster complete all as specified and directed.

S&F glazed ceramic dark/light coloured tiles 300mmx 200mmx 7 mm thick, etc. on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface and taking down of old existing treatment & plaster complete all as specified and directed.

M&L for vitrified ceramic tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 and taking down of old existing treatment & plaster complete all as specified and directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with foot rests any pattern, including provision of lime concrete and connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white, necessary inlet and outlet connections etc. complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) anglo indian type white complete, including necessary inlet and outlet connections etc complete all as specified and directed.

Supply and fix in repairs plastic water closet seat cover, white, closed pattern suitable for European type WC with flat botton and cover with mild steel chromium plated hinging device and fixing bolts complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including fixing arrangement, 32 mm dia PVC flush pipe and connections, joints to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back including CI brackets, waste coupling of PTMT (half or full threaded) bore dia of discharge pipe 32mm (Minimum weight 45gms), cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repair for vitreous china wash hand basin, white, size 580 mm x 450 mm flat back including CI brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

S&F in repair PVC connection 15mm size of length 600mm with PTMT nuts.

S&F in repair PVC connection 15mm size of length 600mm with brass nuts

Supply and fix vitreous China half stall type, urinal white including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L Brick work with sub class' B', old size bricks, straight or curved on plan exc 6m means radius built in cement and sand mortar 1:6 complete all as specified and directed.

All as per Srl item No 63 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 50 shall be reused after necessary cleaning of mortar)

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, white, closed top, cylindrical, hoisted and fixed in position including dismantling water tanks exc 250 Ltr & not exceeding 500Ltr complete all as specified and directed

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20mm bore and fixed. (Minimum weight 20 mm - 210 gms) all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old pipes all as specified and directed.

All as per above item No 67 but fixing only with all fittings and cleaning of pipe.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors including taking down old pipes all as specified and directed.

All as per above item No 69 but fixing only with all fittings and cleaning of pipe.

S&F 25mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors including taking down old pipes all as specified and directed.

All as per above item No 71 but fixing only with all fittings and cleaning of pipe.

S&F in repair 15mm Gun metal , globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

All as per item No. 73 above but 20 mm bore

S&F in repair angle stop valve with flange chromium plated cast copper alloy fancy type, high pressure screwed down complete all as specified.

S&F in repair Pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F in repair bib tap for 15mm bore pipe, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair 15mm bore Bib taps standard of PTMT any colour screwed, for iron pipe and fixed (Minimum weight 15 mm- 90 gms).

S&F in repairs for brass chroumium plated shower rose 125mm size with swivel joints all as specified and directed.

S&F in repairs brass chroumium plated shower arm 15 mm size, 195mm long all as specified and directed.

S&F in repair PVC waste pipe 32mm dia 800mm to 1000mm long to wash basin, urinal and sink etc. all as specified and directed.

S&F in repairs 100mm dia SS grating with or without hinge type or hole type complete all specified and directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down old pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down old pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore with access door complete all as specified and as directed.

All as per Srl item No 87 here in before but 75mm bore.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish away to low lying areas complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate as in floor, finishing cement concrete surface even and smooth without using extra cement.

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and fair.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor for raising of level only.

Material and labour for coloured chequered cement concrete tiles of size 30cmx30cmx25mm thick with grey cement and pigments in floor, set, jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as spd and directed

M&L Granite (of any type) work (table rubbed and polished), 16 to 18mm thick, in steps , jambs, pillars, window - cills, cooking plate forms and like over and including 15mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite omplete all as spd and directed

S&F in repair sinks with drainage board made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply and fix in repair stainless steel plate rack of size 36 inch x 31 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )/ Prayag as approved by GE.

S&F in repairs MS pipe 20mm bore, powder coated /chromium plated with fixing brackets stops rollers including fancy type knobs two Nos to each curtain rod.

M&L for preparation of old decorated brick/concrete/ plastered or unplastered surfaces wall, pillars,cornices and removing all loose material and filling the all holes/patches with wall care putty where required to make surface smooth and applying one coat of oil bound/ oil emulsion distemper complete all as specfied and directed

M&L for complete removal of existing treatment complete all as specified and directed.

M&L for 1.0mm thick wall care putty on plastered wall surface to prepare the surface even and smooth to receive distemper complete all as specified and as directed.

M&L for applying one coat of primer complete all as specified and directed.

M&L for applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated brick/concrete/ plastered or unplastered surfaces wall, pillars, cornices and removing all loose material and filling the all holes/patches with wall care putty where required to make surface smooth and applying one coat of cement base paint complete all as specfied and directed

M&L for preparation of old plastered /un plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed

M&L for preparation old plastered /un plastered surfaces of wall and applying one coat of white wash complete all as specified and directed

M&L for preparation of old painted surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 107 above but on steel surface

Demolition of plain cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish away to low lying areas complete all as specified and directed

M&L APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) laid over a coat of blown type or residual bitumen of grade 85/25 at the rate of 1.20 kg per sq.m on primed surface with bitumen primer @ 0.40 kg /Sqm by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in after cleaning surface complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound, finishing even and fair complete all as specified and directed

Supply only integral water proofing compound.

M&L for plain cement concrete 1:7:12 type F-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete in sunken portion complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in sunken portion finished fair and even complete all as specified and directed

M&L 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

M&L 110mm bore PVC (SWR) 'P' trap including jointing with solvent cement omplete all as specified and directed

M&L for pre cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab for manhole and similar work etc including demolition of old cover complete all as specified and directed.

M&L TMT bars 6 to 8mm dia and over cut to length bent to shape required including crancking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metere long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S & F in repair MS Peg set of six powder coated complete all as specified.

S&F in repair 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finish all as specified and directed.

Supply and fix in repair for 10mm thick corner glass of size 30cm X 30cm, with stainlesss steel decorative type railing on front face and fixed with 3 Nos. 'D' type stainlesss steel brackets complete all as specified and as directed.

M&L for Petty repair to existing steel door by welding hinges or removing the steel door shutters from the frame and re-fixing after making serviceable including painting with two coats of synthetic enamel paint over one coat of red oxide primer on repair surface all as specified

S & F in repair PVC water tank cover with fitting of capacity exc 250ltr but not exc 1000 ltr complete all as specified.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. for capacity of tank exc.250 litres and n.exc. 500 litres complete all as directed

S&F in repair kitchen sink stainless steel coupling 75 mm to 100mm dia, complete all as specified & directed.

S& F in repair Brass CP waste coupling 32mm dia for WHB complete all as specified & directed

S & F in repair brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair new brass spindle with nylon washer and removing leakage of water of any bib tap/stop valve suitable for 15 to 20mm bore pipe complete all as specified.

S&F in repair new brass leg with nylon washer and removing leakage of water of any wall mixture suitable length for 15 to 20mm bore pipe complete all as specified.

S&F in repair tubular, towel rail brass chromium plated 20mm dia D type 60cm long between flanges all as specified and directed.

S&F in repair brass CP flushing jet including pipe of suitable length with brass check nut for European type closet including fixing to 15mm dia pipe complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs central hole basin mixer brass chromium plated quarter turn with regular spout without popup waste system with 450mm long braided hoses suitable for fixing with GI pipes 15mm bore complete all as specified and as directed.

S&F in repair PVC kit complete for low level PVC cistern all as specified and directed.

S&F in repair stainless steel oval shape soap dish holder, fixed to plugs with chromium plated brass screws complete all as spd and directed

Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

M/S Harjinder Singh Contractor

DEEPAK AND CO

M/S GAGAN CONSTRUCTION CO

talwinder singh and co

P S BUILDERS

JOGRAJ CONSTRUCTION COMPANY

D.RAJ And CO.

buta singh and sons

M/s SODHI SALES CORPORATION