Loading…
Loading…
Tender Value
₹16.4 L
EMD Value
₹16,423
Closing Date
17 Jul 2026, 5:00 pm
Executive Enginner W D 02 Z P BEED
Executive Enginner W D 02 Z P BEED
ZPBEED/WD2/2515-2557/11/26-27
2026_BEED_1314193_1
ZPBEED/WD2/2515-2557/11/26-27
Open Tender
Civil Works
180 days
BEED
Registration Cert., ITR, GST, PAN Card etc As per Tender Conditions
2 documents required · 2 mandatory
₹2,000
₹16,423
3 Jul 2026
3 Jul 2026
18 Jul 2026
3 Jul 2026
17 Jul 2026
3 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)
Bd.A.1 Page No.259 S.S.R.Item No.21.01 Page No.153 | 31.2 | CUM | 207 | ₹6,458.4 |
| 2 | 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 Bd.A.2 Page No.259 S.S.R.Item No.21.05 Page No.153 | 18.65 | CUM | 227 | ₹4,233.55 |
| 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand /grit, ramming, watering etc. complete.S S R item no 21.40 page no 118 | 2.18 | CUM | 2,309.63 | ₹5,034.99 |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite / quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) AS directed by engineer in charg SSR I NO 24.01 page no 215 | 10.07 | CUM | 7,045 | ₹70,943.15 |
| 5 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap/ granit /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc S S R I NO 25.11 p no 219 | 5.62 | CUM | 8,090.75 | ₹45,470.02 |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of tra granite /quartzite/ gneiss metal for R.C.C. columns as per etailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR I NO 25.31 | 6.32 | CUM | 14,963.92 | ₹94,571.97 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) S S R I NO 25.50 p no 223 | 9.7 | CUM | 13,449.92 | ₹1,30,464.22 |
| 8 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (S S R item no 26.05 page no 227 | 0.46 | CUM | 15,112.92 | ₹6,951.94 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) S S R item no 25.70 page no 135 | 10.7 | CUM | 15,112.92 | ₹1,61,708.24 |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete. S S R item no 26.33 page no 233 | 2.46 | CUM | 90,206.27 | ₹2,21,907.42 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.91 MB
BOQ_2253560.xls
BOQ • 0.33 MB
SBD11.pdf
Tender Documents • 2.06 MB
Download all tender documents and submit your bid