Bharathidasan Memorial Hall Electrical Works

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Supply and fixing of fancy glass shade and 7W / 9W LED bulb.

Supply and fixing of single box type 4' 18 W LED fitting complete with TW round blocks on wall or ceiling with 18 W LED tube light with Single side connection (Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Twin box type 4' 22 W LED fitting complete with TW round blocks on wall or ceiling with 2 Nos 18 W LED tube light with single side connection ( Havells / equivalant) with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 24 W 1' x 1' High efficency 1x1 Surface LED flat panel with high brightness LED for glare-free homogenous illumination. Also for POP ceilings LED fitting (Havells / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 15 W down Light (Havells / Equivalent ) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of Aesthetically designed ultra modern 34 W 2' x 2' surface Mounting luminaire with high brightness LED fitting (Havells / Equivalent) on wall or ceiling, with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and fixing of 50W Gate light on the existing post/ wall with PVC unsheathed copper leads from terminal to the fitting. (Make: Havells / Equivalent)

Supply and fixing of LED Indoor hanging light (Chandlier Light) lamp fitted on the ceiling with PVC unsheathed leads from terminals to the fitting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with Fan MS Box.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan.

Supply and fixing of 450mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and fixing of light trap arrangements for 450mm (18") sweep exhaust fan.

Supply and fixing of 3nos. 6A two module 3 pin socket, 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 1 no. 6/16A two module socket, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection. (For AC Plug)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40 DP MCB as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End

Supply and fixing of Vertical type 8 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 100 FP MCCB as incoming 2 Nos 32A TP MCB, 1 Nos 63 A TP MCB and 15 Nos 6-32 A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only .

Supply and fixing of Vertical type 8 way Triple pole and neutral MCB Double door Distribution board in sheet steel enclosure with metal door with IP42 protection with 1 No. of 63 FP MCB as incoming 1 Nos 32A TP 21 Nos 6-32A SP MCB outgoing on wall with suitable angle iron framework with Cable entry box on top or bottom with earth connection only. The MCB DB and MCB's should be with Legrand / Hager make only.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 6 sq.mm copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire conection of 10 sq.mm copper wire and making good of the concealed position.

Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.

Supply and fixing of 100A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only.

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with Earth connection only.

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply and erection of 8 W LED Bamboo LED Bollard fittings with New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source.

Supply and erection of 18 W LED Wall washer narrow beam light of 10 degree fitting for focusing the statue with New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source.

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour.

Supply and erection of Aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish.Compatible for all Havells post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole of 4 mtr length with Aesthetically designed decorative pole base cover, enhancing the appearance of the pole with construction of Masonry pedestal with 1 1/4" G.I. pipe for supply cable entry in/out arrangements and fixing the SMC Junction Box fire proof and shock proof with suitable clamp of size 275 x 150 x 100mm with door and lock and key arrangements in corporating 1 No 10A DP MCB for control and 4 way connector on suitable hylem sheet to be housed in the above junction box with painting and supply and fixing of Aesthetically designed 50 W LED post Top with aluminium enclosure, powered with high power LEDs as lightsource and die casted heat sink exhibits classic Victorian look with symmetrical light distribution and excellent heat dissipation for long life. complete on 0.5 mtr of 32mm dia G.I. pipe (class B) with suitable cowl arrangements and using 3 Nos of bolt fixing on the above post including inter connection with PVC unsheathed leads with coil earthing complete.

Supply and laying of 4 x 16 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection.

Supply and laying of 2 x 6 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

Supply, Erection, Testing, Commissioning and Handing over of 1no 25 KVA Diesel Generator set (Make Kirlokar/Asoke Leylend/Cummins) of 0.8 P.F three Phase 415V/420volts,50C/S 1500 RPM CPCB Approved capacity compressing of Developing 56 BHP Water cooled clock wise rotating with 20 KW / 25 KVA operating capacity Brush Less Alternator close coupled underneath fuel tank ,standard safeties, LLOP With stop solenoid ,battery with lead ,Electric start and Anti Vibration mountings and accessories and Automatic Main failure panel as detailed below including transporting and Unloading charges (A) ENGINE : Water cooled diesel engine suitable for Generator application with a shaft output of 56 BHP 1500 RPM under NTP condition . The Engine Shall Comprise the following standard fitting flexible coupling, fly wheel,air cleaner, fan blower radiator, water pump, fuel filter and lubricatingoil filter etc (B) 12/24 Volt Electronic Starting Equipment Complete with Starter motor dynamo standard batteries with cable flexible exhaust piping of 50cms Length ( C ) Engine Instrument Panel / Mounted Starting push button /starting key lubricating oil temperature gauge lubricating oil pressure gauge water temperature gauge safety control for low lubricating oil pressure , safety control for high water temperature safety control for over speed,

Hour meter (mechanical) and RPM indicator battery charging ammeter. The engine should be cabable of providing 10% over load for one hour for every 11hours continous run at full load D.ALTERNATOR: 25 KVA / 20 KW Capacity Brushless Alternator AC 3phase 50c/s 415/420V 0.8PF 1500 RPM under NTP conditions conforming to IS 13364 (part - II) 1992 to be means of coupling (E) Fuel tank : Fuel tank of 100 litrs a Capacity and with Inlet and Outlet connections level indicator with scale etc .., (F) .BASE FRAME: The Base frame should be Fabricated MS channel frame of rigidly welded constrution for mounting of Generator set . The Engine and Alternator should be coupled by suitably designed diaphragm type flexible coupling with guard and mounted on the base frame with proper alignment . (G) ACOUSTIC ENCLOSURE The Acoustic enclosure self standing weather proof KG - CPCB typed Acoustic canopy KG125WS floor mounting type with modular construction with the provision to assemble and dismantle easily ad designed to suit all weather conditions . Erection of Acoustic enclosure suitable 25 KVA Diesel Generator complete with all accessories as above and suitable supports etc ..., 1). Supply of manuals for Operation & Maintanence of DG set with Warranty card etc …, H]. AMF CONTROL PANELS The control panel (cubical) should be vermin and dust proof and fabricated with 16 SWG CRCA sheet metal and floor mounted with suitable hinged doors, enamel painted & incorporating the following.

1no Isolator to isolate the neutral 1no “set on” indicating lamp and 1no “load on” indicating lamp 1no Earth fault relay Note: the engine shall trip for the following conditions 1) Low lubrication oil pressure 2) Over speed

Erection of Gen set: Providing suitable concrete foundation with cement concrete 4350 mm Length X 2950 mm width and 1200 mm Height with sand cushion all around the foundation erection of 25 KVA Generator set over the existing foundation and erection of Generator set with proper alignment over the existing foundation to suit 25 KVA Gen set foundation size Suitable.

Supply and Installation of 240 watts Mixing Amplifier Power handling capacity : 240 Watts Main Voltage : 230Vac ±10% 50/60Hz, S/N ratio>90dB.The amplifiers have 5 Mic inputs,100V output as well as 70V output for connecting to the loudspeakers with line matching transformers,8ohm and 4ohm outputs for connecting to the Low impedance speakers. Make:Bosch or Ahuja or equivalent

Supply and installation of 30 watts Speaker with effective frequency range (-10 dB)100 Hz to 18.5 kHz,Sound pressure level at rated /1 W (1 kHz,1m) 105 /90 dB (SPL). Make and Model: JBL/ Bosch/QSC/Ahuja

Supply and Fixing 15U Rack With Power Supply

Supply and installation of Mixing Consoles with 6 channel USB audio playback. Make and Model: Ahuja or equivalent

Supply and installation of Handheld wireless microphone with wide frequency response of 50-16,000Hz and and receiver. Make and Model: Ahuja or Equivalent

Supply of microphone which consists of long length goose neck microphone with ON / OFF switch, indicator, built in speaker. Make and Model: Ahuja-AGN 480 /equivalent.

Supply and run of 3 core of 2.5 sq.mm PVC insulated multi-stand copper microphone cable in suitable open PVC rigid pipe on wall.

Supply and run of 2 core 1.5 Sqmm Shielded copper speaker wire in suitable open PVC rigid pipe on wall.

Supply and installation of 4 MP IP Indoor /Out door bullet/ WDR 3.6 mm fixed lens IR 60 m and other accessories make Hikvision/ eqivalent Model No. DS-2CD3T43GD-21)

Supply and installation of 32 channel Network video recorder with 8 sata camera recording in minimum of 720p resolution in full HD Hard disc support 4TB USB HDMI should be available with all accessories. (Make Hikvision/equivalent) Model No. DS-8632NI-K8

Supply and installation of 8 port POE Gigabit switch which supports IEEE802 af/at poE standard. (Make Hikvision/equivalent)

Supply and Installation of 8 TB built in Hard Disc Drive (Each NVR for 2 Hard Disc) Make Western/equivalent.

Supply and Installation fo 43 inches LED TV with following features (1) Clear Audio + (2)X-reality pro, (3) Motion flow XR 200. Make: SONY / Samsung / Equivalent.

Supply and Fixing of 6U rack (Wall Mounting) with power sockets and cable manager. Make: D-link / Equivalent.

Supply and Installation of 1KVA, 230 V UPS System with One hour inbuilt battery backup. Make: Intex / Equivalent.

Supply and Installation of PVC Pipe With accessories .

Supply and laying of Unarmoured Cat6 cable through Existing PVC rigid pipe in the wall/ceiling with necessary connection.

Please Enable Macros to View BoQ information