8246 REPAIR/REPLACEMENT OF SANITARY, PLUMBING, JOINERY,ROOF, PLASTERING AND ALL CONNECTED ITEMS AT HQ WNC AND WNC UNITS AT UNDER AGE B/R II OF GE (NW) KUNJALI

Amount

Taking up or down steel tubing and connections of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 20 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore

S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.

S&F in repair angle cocks, cast copper alloy, chromium plated with long shank and cup , high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.

S&F in repair Bib taps, cast copper alloy fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia.

Supply and fixed in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe.

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

S&F in repair PVC ball valve 15mm dia with epoxy coated aluminium rod and high density ball (minium weight 142 gms) complete as directed by Engr-in-charge.

S&F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete as directed by Engr-in-charge.

Supply and fixing in repairs Waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified

Supply and fixing in repairs Waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 40mm complete all as specified

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description not exc 1 sqm each

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc all as specified and as directed by Engr- in- charge.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F in repair 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F Stainless steel butt hinges 100 mm.

S&F 75 mm Stainless steel butt hinges and fixed.

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165

S&F in repair PVC connection 450mm long with two PTMT nuts

Supply and fixing in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides .

S&F in repairs brass CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC

S& F in repairs 125 mm dia stainless steel grating fixed in position complete

S&F in repairs 150 mm dia stainless steel grating fixed in position complete

S&F in repair of good quality PVC syphon kit including float set for low level flushing cistern 0f 10ltrs capacity complete all as directed.

Checking and attending to water leakage from taps or WCs or flushing cistern or or urinals or wash basins or bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, white cement, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If any item if fitting is not serviceable the item will be replaced and the material will be measured and paid at supply only rates)

Supply only spindles of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed by Engineer-in-Charge, Make : ISI marked.

Replacing of GI fittings medium ISI marked with new fittings like Elbow, socket, nipple, union , tee etc complete all as directed at site for following:-

(a) 15mm bore pipe

(b) 20mm bore pipe

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100 mm bore front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).

S&F in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and finning in ends of brackets, cutting for and finning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and directed.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe etc complete all as specified.

S & F in repairs health faucet (ABS Body) Stainless model No 902 of Silver shine or equivalent suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece complete all as specified and directed.

S & F in repairs floor mounted coupled water closet cistern for coupled WC with UF soft close seat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.

S&F in repairs towel ring square with round flange complete all as specified and as directed

S&F in repairs CP towel rail 600 mm long with round flange complete all as specified and as directed

S & F in repairs Stainless steel soap dish holder

S&F in repairs CP toilet roll holder with flap complete all as specified and as directed

S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge.

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed

S & F in repair for urinal pot with sensor Size 370x390x610mm Star white(Senso Art) complete all as specified and directed

S & F in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge

S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system complete all as specified and as directed

S & F coner glass shelfwith bracket

S&F 600 mm glass self assembly fency type with CP frame fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge.

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed

S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed

S&F in repair under counter wash hand basin vitreous china white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified

S&F in repair table top wash hand basin vitreous china white/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

S&F Anodised aluminium snap grid size 605x605mm frame work for false ceiling all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, including dismantling old un serviceable false ceiling, complete all as specified and directed.

S&F 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

S&F in repairs Stainless steel plate rack of size 36" x 30"x12" complete all as specified and directed.

S&F Stainless steel locks suitable for cupboards, drawers etc

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair.

M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings to smooth flow of water from BIB TAPS/shower/WHB pillar tap/Stop valves complete by Air pressure/ water gravity pressure etc. Complete all as specified & directed.

S&F in repair closed top cover for water tank of any capacity and any type with locking arrangement complete all as spd and as directed

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia

Ditto all as per item No 88 above but 75 mm bore.

S&F PVC (SWR) bends/ shoes any radius of 110 mm dia

S&F PVC (SWR) bends any radius of 75 mm dia

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door

Ditto all as per item No 89 above but 75mm bore

Easing and adjusting of existing doors / windows of any description like wooden, iron, aluminium etc complete all as directed at site.

Repairs to steel windows/doors by using welding machine where necessary thicknesss of each welding spot exceeding 6mm but not exceeding 9mm complete all as directed at site including all Material and Labour

S&F in repairs mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified.

S & F of 100 mm Size stainless steel hinges fixed with screws medium weight complete all as specified.

Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips(Glass pan, floor hydrolic spring handles, mortice lock and tower bolt will be measured and paid seperately) area n.exc 4.00 sqm each complete all as specified and directed

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips (Glass pan and wire gauge will be measured and paid separately are n.exc 2.00 sqm each complete all as specified and directed

S&F in repair 12 mm thick preliminated particle board(Glossy MDF board), interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work as in paneling/partition complete all as specified and as directed.

S&F in repairs 18/19 mm thcik prelaminated partical board (Glossy MDF board) exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

M&L in repair 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.

S&F in repair double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L vitrified ceramic tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors, skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed in CM 1:4 complete all as specified and directed

M&L for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness all as specified and directed.

M & L for 18-20mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Hard wear stone (of any type) granite stone slab 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

Hard wear stone 18-20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

M&L for Italian Marble stone 16/18 mm thick machine cutmachine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for machine pressed cheqered cement coloured tiles of size 250mmx250mmx20mm/ 300mm x 300mm x 20 mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.

Grinding and polishing existing floor of any type (Kota stone,mosaic,cuddappa stone etc) all as specified and directed.

S&F in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive. Deign & pattern as approved by GE.

S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.

M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 finished even and fair all as specified and directed.

Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scafolding complete all as specified and as directed

M&L Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and as directed.

M&L Plastering 5mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and as directed .

M&L for rendering 15 mm thick pre polymer modified ready mixed cement based plaster in two coats 10 mm thick base coat and 5 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

M&L for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+8 storey bldg complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastering wall and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty and primer incl preparatiomn of surfaces complete all as specified and directed.

M & L preparation of new plastered surfaces and applying three coat of white wash on ceiling

Demolition of Cement concrete (unreinforced) of any description in ground floor in any thickness or in any position not otherwise specifically provided for using necessary plant/machinery/breaker, complete all as specified and as directed. Note :- Rates quoted included for plant/machinery/breaker to be used and no extra payment to be claim there-on.

Removing concrete debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, by the Engr-in-Charge outside MD land.

VIVANSH RAWAT CONSTRUCTION (BID ID -3500190)

A.R. ENTERPRISE (BID ID -3500684)

Sachin santosh dalvi (BID ID -3494206)

GANGAJAL (BID ID -3492883)