WBIW/SE/CE(W)/NIT-08e/2025-26 SL-2

Supplying Jhaw/Eucalyptus bullah piles at work site,including dressing and making one end pointed. 15 cm av. diameter Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end

Labour for driving Jhaw/Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. 15 cm av. diameter 1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. 2) For string staging under specific instruction of Engineer-in-charge or for driving from pontoon or boats, the rate will be enhanced by Rs. 4.00 per meter.

Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. Width of thinner end above 10 cm. and less than 15 cm. Jhaw / Eucalyptus

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and back filling with approved material complete as per direction of the Engineer-in-Charge . In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means. With pumping out water including shoring as required upto 3 m depth

Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge within a lead of, Beyond 4.00 km and upto 5.00 km. (Measurement to be taken on the basis of stack measurement / pre-post work section measurement after deduction of void as per norms. No extra payment will be made for stacking.) (For compensation for earth land owned and arranged by contractor add Rs 25.00 per m3 extra over rate of E/W for land owned/ arranged by the Department Royalty charge on earth @ Rs 29.00 per m3 & Cesses charges @ Rs. 5.30 per m3 (i.e., Rs. 15.00 per 100 cft), as per Govt notification , which will be paid on production of necessary documents in support of payment made towards the royalties & Cesses.)

Supply of different materials as per approved specification Bricks / Jhama / Bats sorted & stacked at site Brick Bats

Labour charge for dumping / laying of Laterite / Stone Boulders 25 kg & above / Shingles / Brick Bats, from stack of worksite with all leads and lifts in water or spreading the same on the slope of the bank of River/Sea or the slope of the embankment or in the River/ Sea bed to an uniform thickness as per direction of the Engineer-in-charge including cost of all accessories and other incidental charges. Brick Bats

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. Pakur Variety

Supplying, fitting and placing un-coated HYSD bar reinforcement in Bridge Foundation including initial straightening, straightening of coils bars, removal of loose rust (if any), cutting to requisite length bending, binding with annealed wire not less than 1 mm in size and conforming to IS 280 at every intersection hooked and bent to correct shape and placed on forms etc. including cost of black annealed wire and cost of loading, unloading, carriage of all steel materials complete as per drawing and technical specifications and direction of Engineer-in-charge. Tor steel/HYSD bars/ TMT bars (JSW/JSPL/ Shyam/ SRMB/ SSL/ BMASL/ Electrosteel) (Fe 415/Fe 500/Fe 500 D, conforming to IS:1786)