PROVISION OF 01 X MEDICAL STORE BUILDING TO MH WELLINGTON RENOVATION OF BLDG NO XXV AND CONSTR OF HARDSTANDING FOR PARKING AT MRC WELLINGTON UNDER GE WELLINGTON

Amount

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Excavating in trenches, exceeding 1.5 m wide and not exceeding 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point and all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.

Use and waste of timber as in formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surface of concrete complete all as specified and directed.

Reinforced cement concrete M-25 design mix using 20mm graded stone aggregate for columns,pillars, piers, posts and struts etc complete all as specified and as directed

Material and labour for Use and waste of steel Formwork to sides and soffits of fair finished floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as speicified and directed.

Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate for Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roof not exceeding 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide all as specified and directed.

Reinforced cement concrete M-25 Design Mix using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like compelte all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick column, beam etc (Horizontal or sloping) rough finished all as specified and directed.

Granite Stone slab 18-20mm thick machine cut of any colour/ type (table rubbed and polished) as in floors/vertical surfaces, cooking platforms and like set in neat cement including pointing in white cement iwth admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortar 1:6 laid and jointed with gray cement slurry mixed with pigment complete all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers, binders, etc complete all as specified and directed.

Mild steel TMT bars grade 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Anti termite treatment for external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron all as specified and directed.

Anti termite treatment for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia hole with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:4 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Providing precast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:4 type C1 1:3:6 using 20mm graded aggregate complete (with plain or interlocking joints as directed) setting in motar, complete walls built all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth (without using extra cement) all as specified and as directed.

Preparation of newly plastered wall surface and applying wall putty as per manufacturer's instruciton on prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of Oil Emulsion Distemper over a coat of primer (water thinable/ solvent thinable) complete all as specified and directed.

Rendering 15mm thick in Cement mortar 1:4 on fair faces of brick wall surfaces or concrete surfaces finished even and fair with water proofing compound (water proofing compound shall be used as per manufacturers instrucitons) complete all as specified and directed

Supply only liquid water proofing compound for water proof plastering complete all as specified and directed.

Preparation of new surfaces of external wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9litre/10 Sqm over new surfaces including scaffolding where required complete all as specified and as directed

Anodised aluminium snap grid 605mmX605mm frame work for false ceiling all as specified in clause 10.38 of SSR Part-I (2009) complete all as specified and as directed.

6mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed.

Spreading levelling layer not exceeding 25cm with soil well ramming with watering filling under floors all as specified and directed.

Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

25 mm thick Plain cement conncrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in sub base, sub floor and padding concrete complete all as specified and directed.

Vitrified Ceramic tiles light shade 8-10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 35 hereinbefore but on vertical surfaces including 10mm thick cement mortar1:4 as in baking coat of dado/ skirting all as specified and directed.

75mm thick plain Cement concrete, 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection, hardstanding/path and finished even and smooth without using extra cement complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

MS base plates Fe.410-W(Gde-E-250) quality-B, bolts, purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n.exc 30cm long ad n.exc 12mm dia all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

150mm Mild steel sheet eaves gutter 1.25mm thick, galvanised class 3, half round with rounded edges, complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Sheet glass 4.8 mm thickness ordinary quality and glazing with oil putty /wooden beads/ MS square tube in square panes not exc 0.5 sqm each fixed with steel frame work complete all as specified and directed.

Stainless steel wire cloth fixed in repairs, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples in steel / wooden joinery etc all as specified and directed.

Providing plain cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in benching / copings / coping sides of paver block including necessary formwork all as specified and directed.

Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc and applying a shop coat of red oxide primer including providing PCC 1:3:6 type C-0 using 12.5mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.

35 mm thick flush shutter,solid core construction, with block Board Core and plywood face panels, commercial type on both sides complete all as specified and as directed.

MS work in bands, straps, supports or stays, sunshade brackets, hook and pintle hinge, clamps, hold fasts, guardbars, grills bolts, lader for roof approach etc and similar conforming to Fe 410-0 or 310-0 complete all as specified and as directed.

Extruded aluminium alloy handles 150 mm size, fabricated type, anodised complete all as specified and as directed

Butt hinge, 125 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long dow all as specified and directed.

Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring of 140mm overall all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding (but not backing)removing the rubbish of the premises complete all as specified and as directed.

Coloured glazed ceramic tiles, first quality (or approved class, colour and designed/shade) of 450x 300x 7 / 350x 250x 7 mm/ 450X 350X 7mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finish to receive the tiles complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets including frame work all as specified and directed.

Cabinet Cupboard Shutter / shelf / partition / cabinet care case of required sizes made out of HDHMR Board 18 mm thick one side decorative Lamination & other side Balancing Lamination . The 18 mm thick board shutter / cabinet care case finished at all level including all fixing hardwares and solvent as per the Manufacturers Instructions complete all as specified and directed.

Stainless Steel Auto closing Hinges fixed to Cabinet Shutters complete as per Manufacturers specifications and all as specified and directed.

100mm Stainless Steel handles rectangular shape polished bright complete all as specified and directed.

Telescopic Channel in required length including all fixing accessories/ hardwares all as specified and directed.

Ball catcher for cupboard / cabinet etc complete all as specified and directed.

Multipurpose drawer lock with two key all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old plastered wall surface and applying wall putty as per manufacturer's instruciton on prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of Oil Emulsion Distemper over a coat of primer (water thinable/ solvent thinable) complete all as specified and directed.

Curtain rails of anodised aluminium alloy fixing with brackets, stops, rollers etc all as specified and as directed

Vitreous china wash basin white, under counter wash basin of width 450mm including waste pipe, brackets, cutting for pinning in ends of brackets/fixed on granite top complete all as specified and directed. (Note: Granite Shall measured and paid separately)

Waste coupling 32 mm dia bore of PTMT (Half or full threaded) (Minimum weight 32mm-45gm/s) complete all as specified and as directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 15mm bore all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but n.exc 20cm girth complete all as specified and directed.

PVC connection 15mm size with PTMT length 600mm all as specified and as directed.

Stop valve, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated, 15mm bore all as specified and as directed

Pillar taps, 15mm, fancy type, cast copper alloy with capsten heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed all as specified and as directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia and jointing with solvent cement and fixed in repairs complete all as specified and as directed.

Anodised aluminium frame powder coated (minimum thickness of power coating 50 micron) for doors, windows ventilators, U channels, safety grill with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

PVC (SWR) junction single, (single T) equal or unequal of 75mm bore of pipe and jointing with solvent with solvent cement and fixed in repairs complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

150mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:6 type C1, 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Plain Cement Concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, cills, string courses, apex stone, bed plates, kerbs and the like including rounded or chamfered on edges (including necessary form work straight or curved) complete all as specified and directed.

Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors or wall all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in any type soil complete all as specified and directed.

Removing excavated soil/ material to a distance exceeeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.

Sand filing under floors or in foundations including watering and consolidation all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement and pigment, of any shape and size conforming to IS 15658 -2006 of 80mm thick M-40 Grade all as specified and as directed.

100mm thick Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base floor, sub bases floor pavings completed all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modular switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 98 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 98 hereinbefore but point wiring complete with 2.5 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated sheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular switch one way 6A 240V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 240V AC 50 HZ SP one module all as specified and directed.

Modular Metal Flush Box 1/2 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 3 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 4 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 1 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 2 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 3 module all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 4 module all as specified and directed.

Supply and fix SPN 8 way double door 240 volts with 200 Amps rated bus bar, including necessary dummy plate and necessary civil works all as specified and directed. Make: C&S/Legrand/L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed. Make: ABB/ Legrand/ L&T.

LED dimmable LED panel size 595mm x 595mm, 40 Watt, 6000K, 100 watts/ Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with free core flexible copper conductor cable of suitable size including taking down old unsv if required compelete all as specified and directed. Make: Halonix Code-HLFPR22-11-40-CW-37mm-WC / Havells Cat Part No-LHEBAEP6IW1W036 / Luker Product code- LPSD40.

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

LED Security Light fitting of 15 Watts comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 65 complete with all accessories and lamp colour white, 110 Lumen / Watt all as specified and directed. Make: Panasonic Product code- PSTM23157 or equivalent in Philips/ Bajaj

Galvanised iron/ steel (Gl) tubings of 40mm dia bore laying in trenches medium grade with screwed and socket joints, together with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, flanges etc.) also for cutting, screwing and waste and for making forged bends on piping as required. Connectors shall be inserted, where required or directed. The rates also include cutting through walls, floors, etc. and their making good all as specified and directed.

Supply & Laying XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3½ core laid in trenches / ducts/fixed to wall/pole/ inside panel/ drawn through pipe including cable glands and terminal sockets complete all as specified and as directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depthand getting out in soft and loose soil for laying of under ground cable and foundation of poles etc.complete all as specified and directed.

Supply and spreading clean dry riddled sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as specified and directed. Note: The punned down thickness shall only measured for payment.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm all as specified and directed.

Taking down aluminium / copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Modular Metal Flush Box 6 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular White Cover Plate with Frame White cover plate with frame, 6 module all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC 125 Lum/Watt decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXACP5IN1W010 /Halonix -HLTLD-04-10-CW or equivalent techno commercial in Crompton

Taking down old unsv DBs with MCBs and Supply and fix SPN 8 way double door 240 volts with 200 Amps rated bus bar, including necessary dummy plate and necessary civil works all as specified and directed. Make: C&S/Legrand/L&T.

takingdown old unserviceable earthing and Material and labour for Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100mm c/c , funnel ,watering pipe etc. including testing on completion all as specified and directed.

Schedule of Credit (Minus) Rs. 3254.00 NOTE: Bidder shall insert credit amount of Rs. 3254.00 as rate in Green field under Col-5.

K.AYYAPPAN (BID ID -3518137)

GMS Builders (BID ID -3517841)

Shree Jayam Enterprises (BID ID -3518297)