Repair/Maintenance to various regulatory gates on Main Ranbir Canal and its distributaries falling under the jurisdiction of MISD-1 Jammu

Repair/Maintenance to various regulatory gates on Main Ranbir Canal and its distributaries falling under the jurisdiction of MISD-1 Jammu

Gate at Distributary 7D Paloura (3’-6’’x3’-6’’)-1no Repairs to gate of distributary 7D Paloura on main Ranbir canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new set of bearings, worm gear, new stem rod by way of lathe work and rethreading of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Complete Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of welding set etc. to site. Complete Job. Gate at Distributary 73000 escape (8’x6’) -1no Repairs to gate of distributary 73000 escape on main Ranbir canal. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block/hydraulic crane and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new set of worm gear, rethreading of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Complete Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of hydraulic crane, welding set etc. at site. Complete Job. Gate at Distributary of LIS Gurah Pattan (2’-6’’ x2’-6’’) -1no Repairs to gate of distributary of LIS Gurah Pattan. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new set of bearings, worm gear, new stem rod by way of lathe work and rethreading of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Complete Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of welding set etc. to site. Complete Job. Gate at Distributary 29000 Feeder Channel (6’-4”x7’) -1no Repairs to gate of Distributory of 29000 Feeder Channel at Kana Chak. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block/hydraulic crane and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new bearing, straightening of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Complete Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of hydraulic crane, welding set etc. at site. Complete Job Gate at Distributary 29000 Escape Channel (4’-7” x 11’) -1no Repairs to gate of Distributory of 29000 Escape Channel at Kana Chak. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block/hydraulic crane and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new bearing, straightening of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of hydraulic crane, welding set etc. at site. Complete Job Gate at Distributary Saharan head (6’ x 7’) -1no. Repair to the Saharan head gate in Marh area. Job includes complete dismantling of existing winch machine from its installed position and then extraction of gate by means of chain pulley block/hydraulic crane and manual labour. Shifting of the gate by mechanical transport to the workshop for repairs and then cleaning of gate and removal of the old rusted skin plate of gate at workshop and then repairs to the skin plate by way of providing/welding of new MS sheet pieces of 6mm thickness wherever required in place of rusted one as per sample, repairs to gate wedge support by welding work, straightening of the stem rod. Repairs to winch machine by way of providing/fitting of new worm gear, straightening of stem rod and its complete assembling along with support lugs on the ISMC platform by means of providing and fitting of new nut and bolts. Shifting back the gate after the necessary repairs to the site of installation. Job also involves lowering the gate to its closed position inside the channel using chain pulley block and tripod stand and providing and fitting of new set of nuts and bolts for mounting the gate on end of stem rod. It also includes application of two coats of anti-corrosive paint on all surfaces. Checking the gate for its smooth operation. Complete Job includes cost of material, tools and tackles charges, skilled /semi-skilled labour hire charges, hiring and carriage charges of hydraulic crane, welding set etc. at site. Complete Job. Annual repair/maintenance of the gates of Heera Chak feeder (2’-6”x6’) by way of repair to winch machines, providing/fitting of bearings wherever required as per sample, nuts and bolts, complete painting of the winch machines and gate leaves by scrubbing/removal of the old rust and then applying red oxide paint wherever required and anti corrosive enamel paints. Application of grease to the worm and pinion set of gears and on all sliding surfaces. Also replacement of rusted nuts/bolts as per requirement. Refitting of the winch machines and other parts at site and checking for smooth operation of the gate

Rebate on Old Parts

SMART TECH AND CO

JAI MAA BHAGWATI ELECTRICAL AND MECHANICAL WORKS