Different types of work against Summer Plan (Business Plan 2024-25) in the area of Kanpur Road under jurisdiction of E.E., EUDD- Kanpur Road, LESA, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

(a) Line Material

(b) 11 KV 3x70 sqmm XLPE Cable

(c) TF 250 KVA

(d) ABC 3x120 sq.mm.

(e) 11 KV Pin Insulator

(f) 11 KV Pin with nut

(g) 11 KV CABLE JOINTING KIT SUITABLE FOR 3X70 SQMM OUT DOOR

(h)LT PVC Cable 1x240 Sq. mm

(i) ST Pole 11 MTR Long

Dragging of ST Pole digging of pit erection of sub-station type double pole structure on ST Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Cable Hosting of 11 KV 3x70/3x120/3x185/ sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Chemical type earthing (All material and labour shall be supplied the contractor)

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. All material and labour shall be supplied the contractor.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry type LT Distribution Box with Fuse Unit. (All material shall be supplied by contractor).

Proper laying & commissioning of (3x50/3x120 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Fixing and laying of LT PVC Cable 1x240 / 1x400 sq.mm as per RESPO Norms Only Pvc cable provided by department.

Laying of 3X70/3x120/3x185 sq.mm 11 KV XLPE cable by manual method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Supply and fixing of copper L-piece for 250 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 250 KVA TF (400 sqmm) as per RESPO Norms

Supply and fixing of GI Pipe 6" Dia with clamp and nut bolt as per RESPO Norms

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Supply and fixing danger board.

OUTDOOR / INDOOR END TERMINATION JOINTING KIT FOR 11 KV 3X70 SQMM XLPE CABLE

G.S.T. Extra as per rules.

SIDDHI ENTERPRISES