88/EDCB/2023-24

Amount

Safe carriage including Loading/Unloading & proper stacking of following materials from Store Centre, Nawada, Badaun/JE Store to site of work (Approx. distance 0-20 Km.)

11 KV VCB O/G

11 KV 3x185 sqmm XLPE Cable

11 KV 3x185 sqmm XLPE Cable Jointing Kit

11 KV 3x120 sqmm XLPE Cable

11 KV 3x120 sqmm XLPE Cable Jointing Kit

ST Pole Support 11 Mtr. Long

11 KV MS T-Off Channel

Top Channel (125x65x2240 mm)

11 KV Disc Insulator Composite 45 KN (T&C Type)

11 KV Pin Insulator Composite

11 KV X-Arm V Type

ACSR Weasal Conductor

GI Wire 6 SWG

Stay Complete

Earthing Complete

Erection of Single ST Pole Support 11 Mtr. Long in H.T/L.T lines including fitting of all accessories as per RESSPO Norms (All necessary clamps, Nut & Bolts etc. shall be provided by the contractor for execution of work as per RESSPO Norms).

Providing & Fixing of Short Extension Bracket with clamp on pole complete in all respect (Short Extension Bracket with clamp shall be provided by the contractor for execution of work as per RESSPO Norms).

Grouting of 8.5 mtr long ST 11 Mtr. Long poles including cost of cement /C.C. and sand etc. the work shall be completed as per RESPO Norms. All the grouting material shall be provided by the contractor. .

The work of driving the earthing electrode and making connections with GI wire.

Erection/Fixing of stay set with stay wire and clamp as per RESSPO norms including binding. climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and C.C. and sand etc. as per RESSPO norms. All the grouting material shall be provided by the contractor

Stringing and sagging of 11 KV overhead line on ACSR Weasal Conductor as per RESSPO Norms.

Stringing and sagging of 11 KV overhead line on 11 KV 3x185 sq.mm XLPE cable as per RESSPO Norms.

Stringing and sagging of 11 KV overhead line on 11 KV 3x120 sq.mm XLPE as per RESSPO Norms.

Fixing of 11 KV 3x185 Sq.mm XLPE Cable jointing kits after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work.

Fixing of 11 KV 3x120 Sq.mm XLPE Cable jointing kits after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work.

Fixing of danger board on each location and G.I. barbed wire including proper clamping as per RESSPO Norms (Danger Board with clamps & bolts, nuts shall be provided by the contractor)

Erection/Installation of following new 11 KV Outgoing Panel (VCB) in control room and cable joint of the panel to pole including earthing, grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply.

Guarding of 11 KV Line as per RESPO Norms.

Clearing of the line route by Tree Trimming during erection of line and also upto the time of energisation completely as per direction of Incharge.

The following Decentralized material shall be provided by the contractor for execution of work as per RESPO Norms (the material shall be purchased from approved vendor of Discom).

11 KV F Clamp with Nut & Bolt

X-Arm Holding Clamp with Nut & Bolt

PG Clamp

Stone Pad

Danger Board

Barbed Wire

Stay Insulator

Guarding Angle

Guarding Angle Clamp

DURGESH CHANDEL