PROVIDING AND INSTALLING NEW DEEP BORE WELL AT ABAIDE BHOOL CHACK BLCOK SUJANPUR DISTT PATHANKOT UNDER MINING HEAD

Amount

Drilling Bore well of 152mm dia by using ODEX (Tubex) method as per site conditions, complete in all respect 0 mtr. to 80 mtr.

Supplying and lowering of 125mm i/d MS pipe 5.0mm thick

Providing of fixing suitable casing shoe and bit tube as per requirement

Development of bore hole and yield testing with air compressor and subsequently with submersible pumping set etc.

Supplying and erection of submersible pumping set of KSB/ Johnston Kirloskar make confirming to relevant I.S. Specifications coupled directly to water proof single phase Squirrel cage induction motor of suitable capacity conforming to relevant I.S. specification capable of delivering 1 to 2.5 LPS discharge at 35 to 110 mtr. head including cost of accessories such as control panel. Volt meter, Amperemeter, MCB, starter and Submersible Cable etc.

Construction of water storage tank of 5000 ltr. Capacity 10 ft height upto sill level cum pump chamber (6ft dia) including the cost of inlet, outlet, scour and overflow pipe 40 mm i/d G.I Pipe as per IS 1239-2004 (Part-1) (Reaffirmed-1995) complete in all respect including vertical pipe(Rate for storage tank to be quoted by the agency per ltr basis and chamber and other works contingent thereto to be quoted as per CSR).

Providing, Fixing, laying, jointing, cutting & testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects as per DWSS standard analysis. (Supreme /Finolex/Prince/Kissan/Moulding, Jain irrection Make or equivalent make)

uPVC Pipe 63 mm o/d (Manual)

Providing and laying, jointing, fixing, testing ISI marked G.I Pipe (as per IS 1239) B-Class Premium make such as (Jindal, Hissar) including cost of specials such as tees, bends, sockets elbow etc cutting, threading in trenches in the ground complete.

50mm i/d (Without Excavation)

40mm i/d (Without Excavation)

25mm i/d (Without Excavation)

20mm i/d (Without Excavation)

Providing, fixing and jointing ISI Marked Gun-Metal Peet Valves (Heavy Pattern) as IS 778 with hand wheels, on G.I. Pipe lines laid in the ground including all carriages complete. 40mm i/d

Making connection with existing pipe line including cutting cost of D-joint, labour or fixing specials excavation bailing out ect.

Providing and fixing Volt Stablizer (LS)

Disinfection Unit: Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)

Providing Proposed water connection to house hold up to wall with providing laying, jointing, testing G.I. pipe lines 15mm i/d =2.5 mtr B class as per CSR 28.36(A) (Above G.L.) Providing and fixing MDPE pipe 15mm i/d with specials 2.00 mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc cutting, threading and testing trenchs in the ground and ISI 15mm i/d GM ferrule s per IS 2692 and 3" i/d clamp with C.I. bib cock 15 mm i/d as per IS 210 with stainless steel spindle of approved make as per CSR 30.65(b)

28 No. connection with excavation

7 No. connection without excavation