Construction and Improvement of Road and Drain Naya Mohalla Hajj Committee and Surrounding Area in Kalaburagi North under KKRDB Macro for the year 2024-25 (KLB2412123707)

Construction and Improvement of Road and Drain Naya Mohalla Hajj Committee and Surrounding Area in Kalaburagi North under KKRDB Macro for the year 2024-25

Dismantling of cement concrete pavement by mechanical means

using pneumatic tools, breaking to pieces not exceeding 0.02 m3

in volume and stock piling at designated locations and disposal of

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Construction of Granular Sub-Base of required grading as

per design mixing in a mechanical mix plant at OMC, carriage

of mixed Material to work site, spreading in uniform layers

with motor grader on p...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and constructing un-reinforced plain cement

concrete pavement, thickness as per design, over a prepared

sub base, with 43 grade cement or any other type as per

Clause 1501.2.2 M30 (Grade), c...

Providing and laying 80mm thick factory made precast M -30

grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS

15658 for Commercial Traffic Axle load repetitions upto 10MSA

& for Residential ...

Repairs to Machinehole for different depths including removal of debris,

levelling the brick masonry, construction of brick masonry upto Ground

level, providing CC coping alround the MH cover, plaster...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Foundation, Sub structure of Cross drainages add 5%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing of typical Logo board as per

specifications and drawing. Two ACP Sheet of 3mm thick,

top and Bottom plate duly welded/bolted with MS Square

angle 25mm x25mmx 5mm size on back and ...