SPL REPAIR TO OFFRS MD ACCN (QTR NO 14/2 AND 14/4 ) (NO OF DUS-02) AT MANEKSHAW ENCLAVE (MAP) UNDER GE (EAST) AGRA

Amount

Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in roof kerbs, paddings, mud stops slightly chamfered or rounded in edges including required grove cutting complete all as specified and directed.

M & L for Provn of polymeric water proofing roof treatment to non assessable RCC roof described as under and all as specified :- (a) Preparing RCC roof surface and applying one coat of bitumen primer @ Rs. 0.30 Kg /Sqm. (b) Applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm (c) Laying of water proofing treatment APP modified polymeric water proofing membrane of weight not less than 3 kg/sqm with non woven polyster mat of weight 160gms/sqm as centre core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s all as specified. (d) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane . (e) Applying two coats of aluminium paint @ 100 gm /sqm ( each coat) .

Applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg / RM on all corner joints of wall to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler having ER Base and Hardener with Quartz filler etc complete all as specified & directed. Note-: This item shall be carried by authorised company by manufacturer.

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching,coping , roof kerbs, mud stop, padding etc and similar work all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement finished other than fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

Supply only integral water proofing compound complete all as specified and directed.

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application on new plastered surfaces complete all as specified and directed.

M&L for complete removal of extg treatment of old plastered surfaces of wall and applying two coat of oil bound distemper with roller on old decorated wall surfaces over 3 mm thick white putty complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surface complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including complete removal of existin treatment old wall surface complete all as specified and directed.

M&L for complete removal of extg treatment with mechanical device of old plastered surfaces of wall and applying two coat of cement based paint including complete removal of existing treatment or plastered surfaces of walls complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed.

M & L for Preparing old plastered surface to prepare the surface even and smooth and two coat of white wash on ceiling complete all as specified and directed.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. Complete all as specified and directed.

M&L for appliyng 3mm thick wall care putty on wall complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

M & L for Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified and directed.

PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection (75 mm thick) laying in alternate ways cutting grooves and filling bitumen mastic mixed with sand and finished even and smooth without using extra cement complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) 40 mm thick as in sub base of floor/path/paving finished even and fair without using extra cement complete all as specified and directed.

M&L for Chequered cementconcrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cementslurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Granite 20 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and as directed.

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 34.00 above but 20mm bore complete all as specified and directed.

Supply and fixing 15 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified and directed.

Supplying and laying 20 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all cpvc brass fittingsas per site requirement complete all as specified and directed.

S & F 20 mm outer diameter of CPVC brass elbow fixing to CPVC pipes any location complete all as specified and directed.

S & F 20 mm outer diameter of CPVC brass tee fixing to CPVC pipes any location complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair Europen water closet snow white (one piece EWC with seat cover and twin flush fitting) of size 710 x 390 x 790mm incl necessary 'P' or 'S' trap and connection to drain pipe etc with and incl necessary fixing arrangement incl seat cover manufactures instructions complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white,with CI 'P' or 'S' trap integral foot rests including flush pipe,trap lime cement concrete bedding,including taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed.

S&F in repairs wash basin snow white (one piece wash basin with integrated pedestal of size 480 x 425 x 365 mm incl necessary fixing arrangements as per manufactures instructions complete all as specified and directed.

S&F in repair CP Waste coupling (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin and sink complete all as specified and directed.

S&F in repair 20mm bore, brass chromium plated single lever basin mixer with 300 and 600mm braided connection pipe (without pop up ) for making hot & cold water screwed down for pipe and fixed complete all as specified and directed.

S&F in repair 20mm bore, brass chromium plated single lever sink mixer w for making hot & cold water screwed down for pipe and fixed complete all as specified and directed.

S&F in repair wall mixer with provn for OHS with 115mm long bend pipe side connecting legs and wall flange, fixed in repair for 20 mm bore iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

S&F 32/40 mm dia PVC waste pipe for wash basin /sinks complete all as specified and directed.

S&F in repairs 700x500mm beveled edge moulded looking mirror of 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection incl washers bolt etc. complete all asevity protection and long complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S & F in repair CP tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repairs Flushing jet (Health Faucet) for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed completed all as specified and directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel, chromium plated or stainless steel with necessary brass nuts & rubber washers, covered with chromium plated spring complete all as specified and directed.

S & F in repairs CP shower rose 125mm dia along with shower arm(of length 450mm) complete all as specified and directed.

S&F in repair CP soap dish brass chromium plated, size 100 x 60mm, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair 150 mm square CP grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S&F in repair CP grating 100/125 mm dia with hole complete all as specified and directed.

S&F corner glass shelf assembly consisting of 5.50mm thick sheet glass shelf 30 x 30 cm with chromium plated railing complete all as specified and directed.

S & F in repairs 20 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 20 mm bore CP Angle valve with wall flane, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 20 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene white colour water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F in repairs kitchen sink without drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F in repair Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F plate rack of 1mm thick stainless steel of size 900x600mm with three shelves complete all as specified and directed.

S & F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) decorative Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws.Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed.

S&F soft close cabinet hinges for kitchen cabinets/cupboards complete all as specified and directed.

S&F cupboard drawer channel set complete all as specified and directed

S&F SS wardrobe hanger rodset including all fittings complete all as specified and directed

S&F tie hanger for wardrobe including All fittings complete all as specified and directed.

S&F Continuous (piano) Stainless steel hinges width of flaps (when open) in 40mm, complete all as specified and directed.

S & F stainless steel 40mm dia decorative knob for kitchen cup board complete all as specified and directed.

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S&F 75 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.

S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

Supply & fix 30mm thick flush shutter solid core construction with block board and plywood face panels commercial type on both side complete all as specified and directed.

Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified and directed.

Two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth complete all as specified and directed.

S&F for 200mm long brass tower bolt complete all as specified and directed.

S&F for 150mm long brass handle, oval type, stove enamelled complete all as specified and directed.

S&F for 100mm long bright finished brass mortice latch and lock 6 levers with and pair of lever handles of approved quality with necessary screws, complete all as specified and directed

S&F for 300mm long brass sliding door bolt complete all as specified and directed.

S&F for 150mm long brass floor door stoper complete all as specified and directed.

S & F for factory made solid PVC moulded door shutter door shutte,28 to 30mm thick (styles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet on the front face & 2mm prelam PVC sheet on bach face at site as per specification & drawing complete all as specified and directed.

S&F for 75mm long stainless steel Butt hinges complete all as specified and directed.

S&F for 250mm long aluminium sliding door bolt complete all as specified and directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290 complete all as specified and directed.

M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hingescomplete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

S & F powder coated Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repairs 3 mm thick sheet glass, ordinary quality, frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of stress over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L for Boring holes through granite cooking platform lining for pipes ,etc n'exc 50mm dia and making good complete all as specified and directed.

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

S&F in repair for Particle board, 18/19 mm medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 (40 mm graded stone aggregate) as in foundation filling and mass concrete or sunken etc complete all as specified and as directed.

M&L for 15mm thick plastering in CM 1:4 with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound complete all as specified and directed.

M& L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC as per manufacture's instruction complete all as specified and directed.

Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating,smart damp block 2k suprema or approved equivalent,having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing etc complete as per manufactures specifications complete all as specified and directed.

S&F in repairs 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed.

S&F in repairs 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified and directed.

S&F in repairs 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbed portion to match the existing complete all as specified and directed.

S&F in repairs 75 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge.

S&F in repairs 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and jointed with cement joint including making good disturbe portion to match the existing complete all as specified and directed.

S&F in repairs 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

Excavation of post holes each not exc 0.50 cum and getting out in soft and loose soils, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm , watering and removing surplus soils to a distance not exc 50 m and making good surfaces complete all as specified and directed.

Supply only GI chain link fencing (2.4kg/sqm)including line wires to any type of standards, rails, straining bolts, etc. complete all as specified and directed. Note :- Line wire and flat iron will be measured and paid separately

Fixing only GI chain link fencing including line wires to any type of standards, rails, straining bolts, etc. including provission of flat iron for securing with post and taking down existing chain link fencing complete all as specified and directed. Note :- Line wire and flat iron will be measured and paid separately

S&FMild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fittedwith washers and one hexagonal or square nut, exc 5cm but n exc 10cm long and 16 to 20 mm diameter of neck complete all as specified and directed.

Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc complete all as specified and directed.

S&F for MS framed work as in Gates including pintle hinges, stops, rolling wheets , MS Sheets , hand made sliding bolts,grill/gratings, as in sliding gates etc. side hung type complete all as specified and directed by Engr-in-Charge confirming to Fe-410-O or Fe-310-O.

S & F angle iron as in post and struts in fencing including embedding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S & F factory made steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F for 1.60mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc complete as specified and as directed.

Cement concrete type D-2, 1:4:8 mix (using 40mm graded stone aggregates) as in Subbase of flooring of 75mm thickness complete as specified and as directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;including dismantling of old existing paver blocks complete all as specified and directed.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof gradeW(Gde-E-250)quality-B complete all as specified and directed.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board,shelves,etc.wooden area should drill by 6 mm bit,Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit,gap between two holes is 45 cm to 60 cm.filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces.The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20 % EC(Smell Chemical) (ii)CHLORPYRIPHOS 20 % EC (Smell Chemical) (iii) Imidacloprid 30.5 % SC (Odor less Chemical) The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years.

S & F for providing and fixing stinless steel (Grade 304) railing made of hollow tubes channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required ) and fitting the same with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangements complete all as specified and dfirected.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. (Paymentfor providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.

S&F Brass nipple for RO water purifier complete all as specified and directed.

M&L for Providing & applying in any surface Alkaline Rust converting primer APCOREP RUSTREM in two coats conforming to ASTM-B-117 & ASTM-G-60-86 to exposed existing rebars after removing & cleaning loose rust by wire brush and leave it for 6-8 hours. The rust converter shall have a minimum pH of 7.5 and shall be able to convert both hematite and magnetite forms of rust shall pass 400 alternate immersion cycles in 3.5 % NaCl complete all as specifdied and directed

M& L for Providing and applying in any surface anti-corrosive coating APCOREP RUSTCOAT RB (CSIR/CBRI know how) in 2 coats with time interval of minimum 6 hours. The coating shall have ECorr value of -45 mV against SCE in 3.5 NaCL for 100 hours and electrochemical evaluation of max 0.5 mA /cm2. This coating shall be applied over APCOREP RUSTREM coated rebars complete all as specifdied and directed

M&L for Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect as following:- (a) SBR polymer (@ 10 % of cement weight ) modified cementation coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer complete all as specified and directed.

M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and directed.

Supply and fixing modular telephone jack RJ-11 white colour fixed in 1 M box comprising of flush metal box, inner plate and outer cover, all conforming to IS 3854:1997 with finger proof terminals with captive screws having front fixing & removing features without removing plates complete all as specified.

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed.

Supply and fixing Modular Bell push 6A 1 module pole, one way, complete all as specified and directed.

Supply and fixing call bell, Ding dong type, 230 volts AC single pole complete all as directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply and Fixing Modular Metal Flush Box 1/2 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 3 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 4 module complete all as specified and directed.

Supply and Fixing Modular Metal Flush Box 6 module complete all as specified and directed.

Supply and fixing modular cover plate with frame (inner and outer) 1 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with frame (inner and outer) 4 module for mounting switch and sockets all as specified and as directed.

Supply and fixing modular cover plate with frame (inner and outer) 6 module for mounting switch and sockets all as specified and as directed.

Supply and fixing blank spacer plate for single module complete all as specified and directed.

Supply & fixing LED Bulb 9 W, white suitable for lamp holder complete all as specified and directed. Make : Cat Pt No LHLDDBEBBI8R009 of Havells or equivalent in /Philips/Wipro/CG

Supplying and fixing 20 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified

Supplying and fixing 10 watt LED battan surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly pre-wired upto terminal block, power consumption < 10W, luminaire lumens > 1000 lms, driver efficiency > 85%, power facor > 0.95 THD < 20% as per IEC 61000-3-2, colour temp - 6500 K Surge protection 2.5 KV, 50000 burning hrs (min) as per L 70 criteria, two stages isolated constant current operated driver with range 150 - 270 VAC and safety extra low voltage safe level < 60 VDC as per IEC standard with LM 70 & 80 certification and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting, complete all as specified.

Supply and fix Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

Supply & fix in replacement sheet metal enclosure MCB distribution board. TPN 415 volts 4 way with IP-43 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification all as specified and directed.

S&F in repair sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug top with one SP MCB 20 Amp 240 volt complete all as directed all as specified and as directed.

Supply and fixing MCB SP 1 to 32 Amp ('C' curve) having short circuit rating 10KA, 240 volts complete with connection testing and commissioning. Complete all as specified and directed.

Supply and fixing MCB TPN 100 Amps, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed.

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. Note:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, complete all as specified and directed.

Supply, fixing, connecting & testing Exhaust fan heavy duty, CI body single phase 230V, of size 300 mm sweep,1400 rpm with louvered shutters including necessary fixing arrangements on wall with & including bracket nut and bolts and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

Supply, fixing, connecting & testing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), and including connecting wire with new 3 core 0.50 Sqmm PVC insulated and sheathed copper conductor cable from ceiling rose and also writing MES No with black paint complete all as specified and directed.

Supply and fix in replacement electric water heater, storage type steel body with S/S inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc also writing MES No with black paint complete all as specified and directed.

Supply, installation, testing and commissioning of indoor type wall mounting size min (680 X 1100 X 245mm), Polycarbonate CPRI approved OEM made Meter Panel suitable for 04 (four) meter. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel type wall mounted on mounting structure RAL 7016. The meter panel should be anti-acid & anti corrosive & fully transparent Door for meter vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of CPRI test report in polycarbonate only degree of ingress protection IP65 in accordance with IEC 60529. The gasket should be internally embedded made of polyurethane and enclosure make. The manufacturer of board/panel shall submit a copy of type test report of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1 complete all as specified and directed. Note : Re-fixed the energy meter in new meter cabinet including all necessary electrical connection. General Specification & Electrical Parameters: 4 Meter DB Ref No. 2236 / 2023(REV-1). Type of Panel: -Thermoplastic Polycarbonate. Panel Size: -680x 1100x 245mm Degree of Protection: -IP65(EN60 529) SystemVoltage:415V,50Hz,4wire+E Installation: -Indoor Floor mounting Cable Entry: -Incoming/outgoing from bottom. Finish Shade: -Enclosure & Accessories: RAL 7035 Mounting structure: RAL 7016 Incomer: 100 A, FP 25mA MCCB-01 Nos Outgoing: 32A DP 10kA MCB – 4 Nos (5-32)A, 1Phase PREPAID ENERGY METER-4 Nos (Provision Only) Terminals-10SQMM TERMINAL BLOCK- 8 Nos, 10SQMM TERMINAL BLOCK- 4 Nos RECOMMENDED CABLE: - Incoming- I/C- 4CX35 Sq.mm cable (100A) O/C- 3CX6 Sq.mm cable

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified Width : 60cm, Suction Power : 1298 m3/hr, Function Type : Auto clean, 6 way suction, Filter type: Baffle filter, Finish : Black Tampered Glass. Control: Gesture & 3 speed touch speed, Led : 2x1.5W LED, Warranty: 5 Years on product, 12 Years on motor, Product Dimension (WxDxH) (In mm) 600x425x595mm, including point wiring with 2.5 sqmm single core FRLS PVC insulated copper conductor with 16 Amps modular switch and socket on independent board complete all as specified and directed.

mohanlal gupta

Abhi Construction

Mahendra Enterprises

BOXMARK CONSTRUCTIONS

m/s shanti consruction co

SahaDevSingh Constructions

milan enterprises

M/s Kok Singh Sisodia