Organization of overhead line, repairing of damaged cables n organizing the cables on cable tray of raw water washery side pumping station, comprehensive body earthing of motors at raw water side, recasting of pump foundation along with channel cutti

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (100 mm X 110 mm), G.I. bolts, nuts and washers, coach screws etc. as required.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required for motor pump body continuity earthing.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Clamps, bolts, nuts etc.

Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 70 sq. mm

50 mm X 50 mm X 6 mm angle iron

35 mm X 35 mm X 4 mm angle iron

Cutting

Welding

Prociding and fixing G.I. chain link fabric fencing of required width in mesh size 25 X 25 mm made of G.I. wire of dia 3mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer in charge.

Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm. Length and drilling holes upto 10mm dia etc. complete.

Applying prioming coats with primer of approved brand and manufacture, having: with ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/ litre at different places. (Two coats.) on pole and structure.

painting with aluminium paint of approved brand and manufacture to give an even shade: Two or more coats on new work at different place

Supply and fixing of cable trench clamp.

Hire charge of running P.C Poplain Excavator including cost of Diesel , pay of driver , khalasi etc. as per instruction Engineer in charge.

Transporting cost of PopIain excavater (P.C) including cost of transporting loading and unloading , pay of driver ,khalasi etc all complete as per instruction E.I.C (20 Km transporting cost including )

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Total impact of GST for the purpose of CTC

M/s Arvind Kumar Singh

M.L. Enterprises