Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at Puducherry

ABSTRACT OF COST

Estimate Cost - Including

SI No. Description

GST @ 18% (Rs.)

1 Civil Works 29,95,98,273.00

2 Water Supply Plumbing & Sanitary Works 28,88,531.00

3 Fire Fighting System 66,87,502.00

4 Passenger Info 14,39,600.00

5 3 Seater Benches 10,50,200.00

7 Electrical Works 1,18,49,001.21

Total Amount including GST 32,38,98,967.21

Total Amount including GST 32,38,98,967.21

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

1 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including

dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated Cum 3,260.00 161.59 5,26,780.79

soil and disposal of surplus excavated soil as directed, within a lead of 50 m for all kinds of

2 2.8.1 + 2.26 As per Item 1 with Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials. All Kinds Of Soil

3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and Cum 1,008.00 143.28 1,44,421.80

watering, lead up to 50 m and lift upto 1.5 m.

4 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified .

Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

5 2.35.3.1 Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion) - tratment of soil under existing flooors

using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre

holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing

floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration -

6 2.27A.1 Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc

. In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and Cum 942.00 747.16 7,03,828.68

watering etc .complete including all lead and lift

7 15.2.2 Dismantling Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cum 474.00 818.07 3,87,765.37

8 15.3 Demolishing R.C.C work manually / by mechanical means including stacking of steel bars

and disposal of unserviceable material within 50 metres lead

9 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead - in cement mortar Cum 821.00 1,100.69 9,03,668.30

10 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead - for thickness of tiles 10mm to 25mm

11 15.18 Dismantling steel work in built up sections in angles, tees, flats and channels including all

gusset plates, bolts, nuts, cutting rivets ,welding etc.including dismembering and stacking kg 44,154.00 3.09 1,36,506.51

within 50 metres lead

12 15.12.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area each 183.00 312.11 57,116.13

beyond 3 sq.metres

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

1 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

13 15.28.1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the

material within 50 metres lead of - G.S.sheet

14 20.2A.1 Boring , providing and installation bored cast-in-situ reinforced cement concrete piles of

grade M-25 of specified diameter and length below pile cap,to carry a safe working load not

less than specified , excluding the cost of steel reinforcement but including the cost of boring

with bentonite solution and temporary casing of appropriate length for setting out and

removal of same and the of the pile to be embedded in the pile cap etc. by Crawler mounted , Rmt 18,073.00 4,104.26 7,41,76,366.89

telescopic boom hydraulic pilling Rig all complete, including removal of excavated earth with

all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). -

600 mm dia piles - Using Slag Cement Note: Truck Mounted rotary / TMR / Tube well boaring

machine shall not be used

15 20.6.2.1 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of

loading platform and preparation of pile head or construction of test cap and dismantling of

test cap after test etc. complete as per specification - Single pile above 50 tonne and upto

100 tonne capacity -Initial test

16 20.6.2.2 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of

loading platform and preparation of pile head or construction of test cap and dismantling of

test cap after test etc. complete as per specification - Single pile above 50 tonne and upto

100 tonne capacity - Routine test

17 Approved rate Supplying and filling in plinth with M sand under floors, including watering, ramming,

consolidating and dressing complete.

18 4.2D.MO Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness using 0.68cum of

sand & 0.62cum of gravel for 1cum finished to a soaked CBR value of minimum 20 including

cost and conveyance of sand and gravel to the work site and stacking to the standard

departmental gauge for premeaurement, mixing the required quantities of sand and gravel,

spreading watering and consolidation the mix by power roller rolling to achive the required

proctor density including the labour charges for mixing, spreading, hire and fuel charges for

power roller and all other tools and plants employed etc., complete. As per clause no 401 of

MOT specificationFor Road Works

19 4.1.4 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources

20 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 Cum 1,065.00 4,907.68 52,26,678.14

graded stone aggregate 40 mm nominal size)

21 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 Cum 1,232.60 4,907.68 60,49,205.14

graded stone aggregate 40 mm nominal size)For Road Works

22 5.9.1 Centering and shuttering including strutting , propping etc and removal of form for -

foundations, footings, bases of columns etc for mass concrete

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

2 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

23 5.9.5 Centering and shuttering including strutting , propping etc and removal of form for - Lintels ,

beams , plinth beams , girders , bressumers and catilevers

24 5.9.6 Centering and shuttering including strutting , propping etc and removal of form for - Columns

, Pillars , Piers , Abutments , Posts and Struts

25 5.9.3 Centering and shuttering including strutting , propping etc and removal of form for -

Suspended floors , roofs , landings , balconies and access platform

26 5.9.7 Centering and shuttering including strutting , propping etc and removal of form for - Stairs ,

(excluding landings) except spiral -staircases

27 5.9.2 Centering and shuttering including strutting , propping etc and removal of form for - Walls

(any thickness ) including attached pilasters , butteresses , plinth and string courses etc. Sqm 1,889.00 553.62 10,45,789.31

28 5.11.1 Extra for additional height in centering , shuttering where ever required width adequate

bracing , propping etc. including cost of de - shuttering and decentering at all levels , over a

height of 3.5m, for every additional height of 1metre or part thereof (plan area to be Sqm 3,143.00 233.63 7,34,293.43

measured) - Suspended floors, roofs, landing , beams and balconies (Plan area to be

29 16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver block of

M-30 grade made by block making machine with strong vibratory compaction and of

approved size and design / shape laid in required colour and pattern over and including Sqm 3,082.00 724.10 22,31,661.41

50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complte

30 5.15 Providing , hoisting and fixing upto floor five level precast reinforced cement concrete in

lintels, beams, and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse

sand) , cost of required centering and shuttering but excluding the cost of reinforcement with Cum 85.00 9,740.61 8,27,951.43

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

31 5.33.1 Providing and laying in position machine batched and machine mixed design mix M-25 grade

cement concrete for reinforced cement concrete work , using cement content as per

approved design mix , including pumping of concrete to site of laying but excluding the cost of

centering , shuttering , finishing and reinforcement , including admixtures in recommended

proportions as per IS : 9103 to accelerate, retard setting of concrete , improve workability

without impairing strength and durability . Note:- Cement content considered in this item is

@ 330 kg / cum. Excess or less cement used as per design mix is payable or recoverable

separately. - All work upto plinth level

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

3 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

32 5.33.2 Providing and laying in position machine batched and machine mixed design mix M-25 grade

cement concrete for reinforced cement concrete work , using cement content as per

approved design mix , including pumping of concrete to site of laying but excluding the cost of

centering , shuttering , finishing and reinforcement , including admixtures in recommended

proportions as per IS : 9103 to accelerate, retard setting of concrete , improve workability

without impairing strength and durability . Note:- Cement content considered in this item is @

330 kg / cum. Excess or less cement used as per design mix is payable or recoverable

separately. - All work above plinth level upto floor V level

33 5.34.1 Extra for providing richer mixes at all floor levels - Note:- Excess / less cement over the

specified cement content used is payable / recoverable separately - Providing M-30 grade

concrete instead of M-25 grade BMC / RMC . (Note:- cement content considered in M-30 is

@ 340 kg / cum)

34 5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in

position and binding all complete upto plinth level - Thermo -Mechanically treated bars Kg 8,21,971.00 94.13 7,73,70,979.47

(TISCON / VIZAG / JINDAL / SAIL / JSW) Fe - 415 or more

35 5.22A.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in

position and binding all complete above plinth level - Thermo -Mechanically treated bars Kg 1,70,173.00 94.13 1,60,18,146.25

(TISCON / VIZAG / JINDAL / SAIL / JSW) Fe - 415 or more

36 5.22.8 Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating

the rate includes cost of anticorrosive coating including cost of powder , sand blasting,

cleaning , induction , heating , depreciation of machinery etc, wastage in cut length of bars ,

provision of wooden battens between rows of coated bars , cover to work bush pins / bar

bending machines etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993

37 5.22.9 Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating

the rate includes cost of anticorrosive coating including cost of powder , sand blasting,

cleaning , induction , heating , depreciation of machinery etc, wastage in cut length of bars ,

provision of wooden battens between rows of coated bars , cover to work bush pins / bar

bending machines etc - for bars of 8mm to 16 mm diametre - conforming to IS 13620 -1993

38 5.28 Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to

IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints. Sqm 325.00 530.45 1,72,394.76

39 22.12 Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre

40 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement :2

coarse sand : 4 graded stone aggregate 20mm nominal size)

41 6.1.1 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in

foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

4 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

42 6.8 Brick work 7 cm thick common burnt clay F.P.S. (non modular) brick of class designation 3.5

in cement mortar 1:3 ( 1cement : 3 coarse sand ) in superstructure above plinth level and Sqm 19.00 785.15 14,917.82

upto floor five level

43 6.47 Providing and laying autoclaved aerated cement blocks masonry with

150mm/200mm/230mm/300mm thick AAC blocks in super structure above plinth level up to

floor V level with RCC band at sill level and lintel level with approved block laying polymer Cum 680.00 8,208.01 55,81,446.26

modified adhesive mortar all complete .(The payment of RCC band and reinforcement shall

be made for seperately).

44 6.38 Provding and laying autoclaved aerated cement blocks masonry with 100mm thick AAC

blocks in superstructure above plinth level upto floor five level in cement mortar 1:4 (1

cement : 4 coarse sand) . The rate includes providing and placing 50mm concrete band with

2 nos 6 mm dia M.S.bars at every third course of masonry work.

45 21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium windows,

ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air

gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant sqm 34.00 3,535.36 1,20,202.33

(Both primary and secondary sealant) etc. as per specifications, drawings and direction of

Engineer-in-charge complete.

46 13.2.1 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4

47 13.1.1 Ceiling Plastering with 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) sqm 3,962.00 180.67 7,15,813.75

48 13.8.3 Inner Plastering with 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 11,122.00 218.45 24,29,638.71

49 13.7.1 12mm cement plaster finished with a floating coat of neat cement of mix - 1:3 (1 cement :3

50 13.24.1 Extra for plastering done on moulding cornices or architraves including neat finish to line and

level - in one coat

51 13.24.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and

level - in two coat

52 13.42.1 Distempering with 1st quality acrylic washable distember (ready mixed) of approved

manufacutrer , of required shade and colour complete as per manufacturer 's specification - Sqm 3,824.00 78.07 2,98,535.09

Two or more coats on new work

53 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

54 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on

wall surface : Water thinnable cement primer

55 13.60.1A Wall painting with plastic emulsion paint Royal of approved brand and manufacture to give an

even shade - two or more coats on new work

56 13.45.1 Finishing walls with textured exterior paint of required shade - New work (Two or more coats

applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ Sqm 4,043.00 190.83 7,71,524.07

2.20 kg / 10 sqm

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

5 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

57 9.1.2V Providing wood work in frames of doors , windows, clerestory windows and other frames ,

wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia

& length (hold fast lugs or dash fastener shall be paid for separately) -vengai wood

58 9.5.1.2P Providing and fixing panelled or panelled and glazed shutters for doors, windows, and

clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required

size with necessary screws, excluding panelling which will be paid for separately , all

complete - Padak wood - 30 mm thick shutters

59 9.5.2.1V Providing and fixing panelled or panelled and glazed shutters for doors, windows, and

clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required

size with necessary screws, excluding panelling which will be paid for separately , all Sqm 66.00 5,235.68 3,45,555.12

complete - Kiln seasoned and chemically treated Vengai wood - 35 mm thick shutters

60 9.72.1 Providing and fixing bright finished brass butt hinges with necessary screws etc complete -

125 X 85 X 5.5 mm (heavy type)

61 9.72.3 Providing and fixing bright finished brass butt hinges with necessary screws etc complete -

100 X 85 X 5.5 mm (heavy type)

62 9.74.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc

complete - 200 x 10 mm

63 9.74.3 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc

complete - 150 x 10 mm

64 9.75.1 Providing and fixing bright finished brass door latch with necessary screws etc complete -

65 9.75.2 Providing and fixing bright finished brass door latch with necessary screws etc complete -

66 9.76 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a

pair of lever handles of approved quality with necessary screws etc. complete.

67 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary

screws, etc. complete.

68 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door

closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg

to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

69 9.129 Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three

layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l

Type ll), having one side decorative lamination and other side balancing lamination, including

IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright

finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

70 9.79.2 Providing and fixing special quality bright finished brass cupboard or ward robe locks with

DEEPAK 281.17 Digitally signed by

four levers of approved quality including necessary screws etc complete - 50mm DEEPAK KUMAR MEHRA

6 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

71 9.81.1 Providing and fixing bright finished brass handles with screws etc complete - 125 mm Each 26.00 247.76 6,441.88

72 9.81.2 Providing and fixing bright finished brass handles with screws etc complete - 100 mm Each 2.00 207.61 415.22

73 9.147A.3 Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed

windows comprising of uPVC multi-chambered frame , sash and mullion(where ever

required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel

section made from roll forming process of required length (shape & size according to uPVC

profile), uPVC extruded glazing beads of appropriate dimension , EPDM gasket , stainless

steel (SS 304 grade) friction hinges , zinc alloy (white powder coated) casement handles, G.I

fasteners 100 x 8 mm size for fixing frame to finished wall , plastic packers , plastic caps and

necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion

welded at all corners, mullion (if required) shall be also fusion welded including drilling of Sqm 80.00 8,877.68 7,10,214.62

holes for fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer

rod of required size and of approved quality , all complete as per approved drawing.(Single /

double glass panes and silicon sealent shall be paid separately) - Casement window double

panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series)

frame 47 x 50 mm , sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 +

or - 0.2mm and single glazing bead of appropriate dimension . (Area of window upto 2.50

74 9.147B Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators

comprising of uPVC multi-chambered frame and mullion (where ever required) extruded

profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according to uPVC profile), , uPVC extruded

glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for

fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel

screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if

required) shall be also fusion welded including drilling of holes for fixing hardware's and

drainage of water etc. After fixing frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealant over backer rod of required size and of

approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes and silicon sealant shall be paid separately) -

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm

both having wall thickness of 1.9 + or -0.2 mm and single glazing bead of appropriate

dimension. (Area upto 0.75 sqm) Fixed window size - 1.20x0.50 m

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

7 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

75 9.11.9 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness

of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with

2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame

profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket Rm 294.00 462.67 1,36,023.86

weather seal to be provided through out the frame. The door frame to be fixed to the wall

using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and

direction of Engineerin-Charge.

76 9.120.1 Providing and fixing factory made panel PVC door shutter consisting of frame made out of

M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for

top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and

manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30

mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in

45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of

which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form

top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm

shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided Sqm 106.00 2,943.33 3,11,993.30

both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided

as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be

fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x

15 mm wide PVC sheet beadingon inner side, and joined together with solvent cement

adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior

side of the 'C' Channel using PVC solvent adhesive etc. complete as per manufacturer's

specification & drawing. 30 mm thick plain PVC door shutters

77 10.6.2 Supplying and fixing rolling shutters of approved make, made of required size M.S.laths,

interlocked together through their entire length and jointed together at the end by end locks ,

mounted on specially designed pipe shaft with brackets, side guides and arrangements for

inside and outside locking with push and pull operation complete, including the cost of

providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile

steel wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of

required thickness for rolling shutters - 80 x 1.20mm M.S.laths with 1.25 mm thick top cover

78 11.37.2 Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified

by the manufacturer), of commercial quality conforming to IS : 15622, of approved make (Bell

/ Johnson / Regency / Somany / Naveen / Asian) in colours such as white, Ivory, Grey, Fume

red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including

pointing the joints with white cement and matching pigment etc., complete

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

8 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

79 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second

layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @

0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for

48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.

80 11.41.2 Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of

approved make , in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement Sqm 1,647.00 1,278.99 21,06,496.86

: 4 coarse sand) , including grouting the joints with white cement and matching pigments etc.,

complete - size of tile600x600mm

81 8.12 Providing and laying flamed finish granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4

(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement Sqm 3,465.00 2,538.10 87,94,507.49

slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all

complete as specified and as - flamed finish granite stone slab Jet black , Cherry red, Elite

brown, Cat eye or equivalent

82 11.24 Extra for pre finished nosing to treads of steps of granite slabs. RM 137.00 452.42 61,982.06

83 11.36B Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness

to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco)

in all colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and

dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing

with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of

matching shade complete - size 300x450 mm

84 13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat

applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved Sqm 118.00 115.25 13,599.57

brand and manufacture

85 13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more

coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of Sqm 1,540.00 115.05 1,77,177.00

approved brand and manufacture.

86 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,

square or round bars etc. including priming coat with approved steel primer all complete. Kg 16,904.00 153.72 25,98,459.21

Fixed to steel windows by welding .

87 16.70.2 Providing and fixing G.I.chain link fabric fencing of required width in mesh size 50 x 50 mm

including strengthening with 2mm dia wire or nuts , bolts and washers as required complete -

Made of G.I.wire of dia 4mm , PVC coated to achieve outer dia not less than 5mm in required

colour and shade Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

9 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

88 12.20L Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size

brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with

gur and belgiri treatment complete including rounding of junctions with Parapet wall complete

89 12.20 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of

approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed

with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4

(1 cement : 4 coarse sand) and finished neat complete.

90 19.19.1.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape

and approved quality - LD - 2.5 -rectangular shape 600x450 mm inernal dimensions No 6.00 1,271.63 7,629.76

91 22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry

mixed with water proofing cement compound consisting of applying: (a) after surface

preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is

still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5

mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing Sqm 533.00 488.25 2,60,236.50

cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed

to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be

taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and

final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose

of measurement the entire treated surface will be measured.

92 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

93 12.47.1 Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing upto any pitch,

including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia G.I.plain / bitumen

washers complete but excluding the cost of purlins , rafters ,trusses etc. The sheets shall be

manufactured out of 2400 TEX panel rovigs incorporting minimum 0.3% ultra -voilet stabiliser

in resin system under approximately 2400 psi and hot cured. They shall be of uniform Sqm 1,086.00 1,014.03 11,01,239.84

pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.

The sheets shall be opaque or translucent, clear or pigmented , textured or smooth as

specified - 2mm thick corrugated (2.5" or 4.2 " or 6") or step-down (2" or 3" or 6") as specifed

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

10 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

94 10. 2 Structural steel work riveted , bolted or welded in built up sections , trusses and framed work

, including cutting, hoisting , fixing in position and applying a priming coat of approved steel KG 37,463.00 94.26 35,31,202.44

primer all complete

95 22.23.1 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing

treatment to the RCC structures like retaining walls of the basement, water tanks , roof slabs,

podiums , reservior , sewage & water treatment plant , tunnels / subway and bridge deck etc.,

prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal

surfaces and applying the same from negative (internal) side with the help of synthetic fiber

brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by Sqm 570.00 535.09 3,05,003.92

reducing permeability of concrete by more than 90% compared with control concrete as per

DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry

shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried

out all complete as per specification . The product performance shall carry guarantee for 10

years against any leakage - For Vertical surfcae two coats @ 0.70 kg per sqm

Sub total for civil = 29,95,98,273.00

WATER SUPPLY AND SANITARY ARRANGEMENTS

96 24.1.1.1 Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method

prescribed in IS : 2800 (part 1) , including collecting samples from different strata , preparing

and submitting strata chart /bore log, including hire & running charges of all equipments, tools Rmt 195.00 338.90 66,084.72

, plants & machineries required for the job, all complete - upto 90 metre depth below ground

level - all types of soil - 300 mm dia

97 24.2.1.1 Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method

prescribed in IS : 2800 (part 1) , including collecting samples from different strata ,

preparing and submitting strata chart /bore log, including hire & running charges of all Rmt 120.00 395.38 47,445.91

equipments, tools , plants & machineries required for the job, all complete - beyond 90 metre

& upto 150 metre depth below ground level -all types of soil - 300 mm dia

98 30.29 Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to IS:12818-1992

with relevant amendments with class designation CM and with minimum wall thickness of 7.5

mm as per I.S.Code into the bore well with proper vertical alignments etc. Including the cost RM 230.00 1,144.68 2,63,277.00

of materials , but excluding the cost of labour for positioning the assembly for lowering

purpose using contractor's rig

99 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes RM 130.00 62.29 8,097.99

100 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized

PVC medium well casing (CM) pipe of required dia , conforming to IS:12818, including

required hire and labour charges, fittings & accessories etc. all complete , for all depths - 150

mm nominal size dia

101 24.5 Supplying , filling , spreading & leveling stone boulders of size rage 5 cm to 20

cm,inrecharge pit, in the required thickness, for all leads & lifts , all complete Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

11 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

102 24.6 Supplying, filling, spreading and levelling gravels of size range 5 mm to 10 mm , in the

recharge pit, over the existing layer of boulders , in required thickness for all leads and lifts , Cum 19.00 780.42 14,827.92

103 24.8 Gravel packing in tubewell construction in accordance with IS :4097, including providing

gravel fine / medium / coarse, in required grading and sizes as per actual requirement , of Cum 8.00 811.56 6,492.45

104 145(0287) Supplying , filling , spreading & leveling Brick aggregate (single size):40mm nominal size

,inrecharge pit, in the required thickness, for all leads & lifts , all complete

105 152(0295) Supplying , filling , spreading & leveling Stone aggregate (single size):20mm nominal size

,inrecharge pit, in the required thickness, for all leads & lifts , all complete

106 31.250.1A Supplying of electrically operated wet type submersible motor and pumpset , AC 3 phase,

415 volts, 50 Hz, 2900-3000 RPM.The pump shall have brass impeller, high grade steel

shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150 /

200mm dia.), complete.The rate includes, all taxes, freight, etc., FOR at site in UT of

Puducherry. The pumpset shall be guaranteed for a period of one year from the date of

commissioning.(5 HP Submersible motor and pumpset).

107 31.256.1A Supplying and fixing of fully automatic air break star-delta starter range for 5A to 13A

F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., No 4.00 6,641.82 26,567.28

complete.- 5HP to 12.5 HP pumpsets

108 31.258.1A Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat

flexible cable of Finolex make complete.-upto 10HP pumpset

109 31.160.1G Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and

ISI marked including transportation to the site , lowering to the trenches, laying to proper

grade and alignment, testing of joints with required testing equipment, including cost of

solvent cement,excluding UPVC specials such as bends,tees, threaded pieces,couplers

,reducer, endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

110 31.160.1E Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and

ISI marked including transportation to the site , lowering to the trenches, laying to proper

grade and alignment, testing of joints with required testing equipment,including cost of

solvent cement,excluding UPVC specials such as bends,tees, threaded pieces,

couplers,reducer, endcaps etc.,complete all as per IS and CPWD specification. - 50mm dia.

111 31.160.1G Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and

ISI marked including transportation to the site , lowering to the trenches, laying to

proper grade and alignment, testing of joints with required testing

equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,

threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD

specification. - 75mm dia.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

12 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

112 31.160.1K Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and

ISI marked including transportation to the site , lowering to the trenches, laying to

proper grade and alignment, testing of joints with required testing

equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,

threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD

specification. - 160mm dia.

113 31.160.1M Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and

ISI marked including transportation to the site , lowering to the trenches, laying to proper

grade and alignment, testing of joints with required testing equipment,including cost of

solvent cement,excluding UPVC specials such as bends,tees, threaded

pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. -

114 19.35.1 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including

collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 Rm 23.00 2,262.97 52,048.28

fine sand) including testing of joints etc. complete 450 mm dia RCC pipes

115 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap RM 255.00 306.25 78,092.58

for thermal expansion, (i) Single socketed pipes. 110 mm diameter

116 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for

unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing

with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5

degree - 110 mm bend

117 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing

with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe

118 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC

rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of

required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4

coarse sand) and making good the wall etc. complete- 100mm

119 18.17 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -

25mm nominal bore

120 18.17.2 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -

32mm nominal bore

121 18.17.3 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -

40mm nominal bore

122 18.17.4 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -

50mm nominal bore

123 18.11.1 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the

walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting metre 240.00 423.47 Digitally1,01,631.98

chases and making good the wall : 15 mm dia nominal bore DEEPAK DEEPAK KUMAR MEHRA

13 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

124 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:

12701 marked , with cover and suitable locking arrangement and making necessary holes for

inlet, outlet and overflow pipes but without fittings and the base support for tank - Circular

125 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm

126 17.7.1 Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm C.P.

brass waste of standard pattern, including painting of fittings and brackets, cutting and

making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm

with a pair of 15 mm C.P. brass pillar taps

127 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make. Each 30.00 797.88 23,936.42

128 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin

of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern

with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and making good the walls and

floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern

129 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat

and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &

C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and

mosquito proof coupling of approved municipal design complete, including painting of fittings

and brackets, cutting and making good the walls and floors wherever required :

130 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand

cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors wherever required:White

Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

131 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as

approved by Engineer in charge.

132 18.74.2 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of

approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length 15 mm nominal Each 36.00 81.90 2,948.54

bore with 45 cm length

133 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved

quality conforming to IS:8931 15mm nominal bore

134 18.17.1A Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

14 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

135 19.33.1 Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)

conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 123.00 355.10 43,676.98

leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre

136 19.33.2 Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)

conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 197.00 99.47 19,596.38

leaving 10mm gap for thermal expansion - single socked pipes -75mm diametre

137 (19.33.2F+19.33. Providing and fixing on wall / column face each 119.65 unplasticisd - PVC moulded fittings /

1D) Average accessories for unplasticisd - PVC soil and waste pipes conforming to IS :4985 - including

jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion -

Bend with door 75mm

138 19.33.1A Providing and fixing on wall / column face unplasticisd - PVC moulded fittings / accessories

for unplasticisd - PVC soil and waste pipes conforming to IS :14735 -1999 including jointing

with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion - Single tee

with door - 75x75x75mm

139 31.166.1G Providing and fixing in position UPVC moulded plain coupler (Finolex / jain)(0.6Mpa)

conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing Each 30.00 171.90 5,157.07

materials etc,complete - 75mm dia

140 19.33.1D Providing and fixing on wall face / column each face unplasticised - PVC mould fittings /

accessories forunplasticisd - PVC soil and waste pipesconforming to IS : 14735 - 1999

including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal

expansion - bend with door 110 mm

141 19.33.1A Providing and fixing on wall face / column face unplasticised - PVC moulded fittings /

accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -1999

including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal

expansion - Single tee with door - 110 x110x110 mm

142 31.166.1I Providing and fixing in position UPVC moulded plain coupler (Finolex / jain)(0.6 Mpa)

conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing Each 30.00 265.77 7,973.14

materials etc,complete - 110mm dia

143 17.60.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 - iron

trap with 100mm inlet and 100mm outlet

144 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick

masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the

weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per Each 16.00 1,574.77 25,196.30

standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular)

bricks of class designation 7.5

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

15 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

145 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC

solvement cement and the cost of cutting chases and making good the same including

testing of joints complete - Concealed work , including cutting chases and making good the

wall etc - 32 mm nominal outer dia pipes

146 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC

solvement cement and the cost of cutting chases and making good the same including

testing of joints complete - Concealed work , including cutting chases and making good the

wall etc - 25 mm nominal outer dia pipes

147 18.7.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC

solvement cement and the cost of cutting chases and making good the same including

testing of joints complete - Concealed work , including cutting chases and making good the

wall etc - 32 mm nominal outer dia pipes

148 18.7.5 Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the

pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step Rmt 50.00 510.55 25,527.53

CPVC solvent cement and testing of joints complete - internal work - exposed on wall -

40mm nominal outer dia pipes

149 18.7.6 Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing

the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step Rmt 50.00 702.70 35,135.09

CPVC solvent cement and testing of joints complete - internal work - exposed on wall -

50mm nominal outer dia pipes

150 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved

quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Each 24.00 1,529.65 36,711.50

screws and washers complete.

151 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,

height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

152 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

153 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP

brass screws with concealed fittings arrangement of approved quality and colour600 mm long

towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing

not less than 190 gms

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

16 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

154 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved

make conforming to IS:8931. 15 mm nominal bore

155 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.

brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm

bowl depth 250 mm

156 31.251.A Supplying of electrically operated, single no 34,604.55 stage high speed, centrifugal

monoblock with volute type delivery pumpset (Texmo/KSB/Taro/Kirloskar) make, AC 3

phase, 415V, 50 HZ, 2900 - 3000 RPM. The pump shell have C.I. impeller, high grade

steel shaft having (100mm x 100mm) suction and delivery respectively including stainer /

foot valve to pump the water from UGR to OHT. The rate includes, all taxes, freight, etc.,

FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year

from the date of commissioning.(5 HP Monoblock centrifugal motor and pumpset).

Sub total for water supply and plumbing work = 28,88,531.00

Fire Fighting System

157 Excavating trenches of required width for pipes and fittings etc. including dressing of sides,

ramming of bottom depth upto 1.5 Mtrs including getting out the excavated soil and then

returning the soil as required in layers not exceeding 20 cms in depth including consolidating

each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as

directed within a lead of 150 mtrs (pipe not exceeding 300 mm). In ordinary soil.

158 Providing, Laying. Testing & Commissioning of RCC hume pipes of NP2 class with suitable

collars filling the recess at joints of pipes with hemp dipped in hot bitumen or other suitable

compound for chaulking of joint by jack, setting up of loose space over the collar joints

caulked with CM 1:2, finished both ends to a slope of 1:1 including curing, testing of pipes,

etc., complete.

159 Drilling with core cutting machine in RCC beams,slabs floors,etc., for laying pipes and

rendering thesame in RCC 1:2:4, finishing the same to the satisfaction of the owner or his

authorized representative etc., including nominal reinforcement wherever required, complete.

The quoted rate shall alsoinclude for providing EPOXY based water proofingcompound for

sealing the joints around the pipes. RCC walls/ beams ( upto 400 mm thk)

a 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 3.00 1,676.84 5,030.53

160 Supplying and costruction of of P.C.C support blocks of 1 : 2 : 4 concrete mix of sizes as

given below for pipe supports at terrace level to run the terrace fire hydrant pipes with

necessary shuttering, plastering, pipe fixing anchors etc., complete as per specifications.

a 230 x 230 x 230 mm Nos. 34.00 1,551.70 Digitally signed

FIRE HYDRANT SYSTEM DEEPAK DEEPAK KUMAR MEHRA

17 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

161 Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt -

I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as

per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners,

bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees,

elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable

supports etc, complete. PIPE TO EXTERNAL YARD HYDRANT

PIPING ABOVE GROUND :

162 Supply, errect, jointing, testing and commissioning of heavy class G.I pipes (as per IS-1239).

The pipes being fixed on to the wall or suspended from the ceiling / truss with angle iron

supports complete with bends, tees, flanges and with all other required accessories including

painting of the pipeline with two coats of approved enamel paint over a coat of anti corrosive

primer etc. complete. As per IS code standards. Rate quoted above shall include providing

M.S.supports in angle iron / plates pipes etc. at every 2.5 m c/c. Rate quoted shall include for

supply and providing necessary, welding cutting, 'U' clamps both nuts, washers etc.as per

specification or pipe supports for horizontal / vertical pipes running along wall / column, slabs

trenches etc to suit different dia pipes made of GI/MS rods, flats etc. consists of strap, nuts

washers, threaded rod etc., rate quoted shall also include necessary aniti corrosive painting

and 2 coat f approved enamel colour paint

163 Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN

10/16) slim seal standard lever operated type with required flanges, nuts, bolts etc. complete.

c 100 mm dia. (Shaft riser and Terrace) Each 5.00 2,593.52 12,967.58

AUTOMATIC AIR RELEASE VALVES (TERRACE LVL FOR WET RISER) :

164 Supply, fixing, testing and commissioning of Air release valves screwed ends of approved

brand of manufacture, with accressories,etc complete. 25 mm dia.

165 Supplying, installing, testing and commissioning of heavy duty Gun Metal gate valves

screwed ends of approved brand of manufacture.PN-10

NON RETURN VALVE

166 Supply, fixing, testing and commissioning of Non return valve falnged end of approved brand

of manufacture, with accressories,etc complete.

Digitally signed by

INTERNAL FIRE HYDRANT SYSTEM DEEPAK DEEPAK KUMAR MEHRA

18 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

167 1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE outlet hydrant valve with

chain and cap of GM gunmetal.

168 2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs long with 63 mm gunmetal

male and female instantaneous coupling.

169 63 mm Gunmetal branch pipe with hexagonal detachable 16 mm nozzle, made

instantaneous coupling etc. complete.

170 Hose reel drum with 19 mm dia bore reinforced rubber hose of length 40 Mtrs length fitted

with 6.35 mm dia. nozzle. The hose reel drum shall be recessed swinging type with reel drum nos 7.00 10,606.34 74,244.36

hose provided with coupling as per detailed specification.

171 Internal hose cabinet frame (1200 x 900 x150) fronted with hinged & lock made out of 16 G

M.S. sheet with powder coated paint of to suit internal fire duct opening to accommodate the Nos 7.00 9,149.35 64,045.43

following accessories as mention above :-

SINGLE HEADED YARD HYDRANT

172 Supply, fixing test and commissioning of 80 mm dia GI MSDF bend.80 mm dia GI MSDF

stand pipe (1 Mtr below + 1 Mtr above).The pipe portion below ground shall be with anti Nos 11.00 3,428.21 37,710.32

corrosive treatment as per detail specifications

173 Supply, fixing test and commissioning of 1 No. 63 mm dia female instantaneous pattern

oblique hydrant valve with chain and cap of gun metal

174 Supply, fixing test and commissioning of 2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I

(ISI mark) 15 Mtrs long with 63 mm gun metal make male and female instantaneous Nos 11.00 12,392.48 1,36,317.33

175 Supply, fixing test and commissioning of 63 mm gun metal branch pipe with gun metal

hexagonal detachable 16 mm nozzle, made instantaneous coupling etc. complete.

176 Supply, fixing test and commissioning of M.S. Hose cabinet stand mouted type fabricated out

of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and

size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes Nos 11.00 8,014.06 88,154.69

suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of

approved colour both inside and out side.

TERRACE FIRE HYDRANT SYSTEM:-

177 Supply and fix terrace level 1 no of monoblock pump of capacity 450 LPM 35 Mtrs head with

suitable electrical driven motor, suction and delevery side Butterfly valve, non return valve,

pressure guage, switches,cables,wires and necessary acessories etc. complete as per

specification.The pump shall be with IP 55 protection.

178 Supply, storing, erection, testing and commissioning of wall mounted control panel with

SFU's, DOL starter, indicating lamps, push buttons, , necessary connecting cables, etc as per

detailed specification. The panel shall have IP 55 protection and provision to BMS intigration.

etc., complete.

TWO WAY FIRE BRIGADE INLET

179 Two nos. 63 mm dia Gun metal instantaneous inlet arranged on a 100 mm dia GI header

with flanges. 1 nos. 100 mm dia Butterfly valves ( PN10) Insitu moulded Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

19 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

180 Providing and installing in position the following type of sign boards made out of 3mm thick

"Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle

painted foam board, complete with mirror fasteners.

a Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED

OTHERWISE" of 1.5cm height letters in red with white back ground.The size of the board

shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near

Manual call points.

b Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every

floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting Nos 4.00 496.84 1,987.37

colour from back ground.Size shall be 15cm x 60cm.

181 Providing and fixing in position the signages " FIRE ORDER" it should contain the following

matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self

adhesive vinyle painted foam board of 3' x 4'. alert the security at security room by actuating

manual call point located at strategic locations. evacuate the occupants by using fire exits

and emergency exits only and assemble at various assembly poits. if possible try to Nos 4.00 3,105.26 12,421.05

extinguish the fire by using nearest / suitable portable extinguisher or water from nearest wet

riser. be calm and do not give any room from panic, walk, do not run. if you encounter

serious difficulty in evacuation, flat and try to attract attention of rescue team.

182 Action by security/reception upon receipt of information through fire alarm orfire detectors or

by using public address system. alert the occupants by using public address system. inform

fire control through any one of the following phone numbers: 101 / local nos. refer evacuation

plan from evacuating standard people. guide the fire force, on their arrival to the seat of fire.

in case of the casualties, call ambulance by dialling number.

FIRE EXTINGUISHER SYSTEM

183 Supply and install in position approved make ABC Stored pressure type Fire Extinguisher of 6

kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure

gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Each 7.00 3,113.96 21,797.71

discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683

with ISI mark and wall bracket. Fire Rating 3A, 21B

184 Supply and install in position approved make ABC Stored pressure type Fire Extinguisher of 6

kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure

gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with Each 1.00 6,642.78 6,642.78

discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683

with ISI mark and wall bracket. Fire Rating 3A, 21B

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

20 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

185 Supply and install in position approved make Water Stored pressure type Fire Extinguisher of

9lit capacity, fitted with discharge control valve ( Sq.grip type ) CE marked and pressure

gauge, with discharge hose and open nozzle and supplied complete with initial charge as per Each 5.00 8,071.20 40,356.00

IS: 15683 with ISI mark and wall bracket. Fire Rating 2A

186 Supply and install in position approved make Co2 type Fire Extinguisher of 2kgs capacity,

made from brand new seamless drawn steel cylinder as per IS: 7285 with ISI mark and Chief

of controller of explosives approval, fitted with wheel/sq.grip valve as per IS: 3224 with ISI Each 3.00 6,642.78 19,928.34

mark, with discharge bend and horn and supplied complete with initial charge as per IS:

15683 with ISI mark and wall bracket. Fire Rating 8B or 13B

187 Providing ,fixing , testing and commissioning of Portable Carbon-di-oxide Gas Type Fire

Extinguisher 4.5 Kgs, squeeze Grip,Controllable discharge mechanism with nozzle, bend,

Hose and wall mounting bracket etc.The Can is made of Seamless Clinger and External

Coating done by Spray Painting.The thickness shall not less than 4.5 mm made of Sheet

metal.The Fire Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall

consider the suitable signages along with the extinguishers.

188 Supplying, installing, testing and commissioning of zone selector P.A. console and with

CRCA sheet housing,with necessary input ,output devices and control desk( rack) as

required. Console shall have all call / call back facility complete with battery back up and it

should also work on AC single phase power.The panel shall have intigration facilty with BMS

and also voice evacuation system with intigration facility with PA and FA Panel

189 Supplying, installing, testing and commissioning solid state Amplifier out put in rack,

including neccessory control wires, jacks etc. complete.

190 Supplying, installing, testing and commissioning 40 strand twin core control cables of PVC

insulated copper conductor, Confirming to IS 1554, as per specification.

191 Supplying, installing, testing and commissioning approved make 25mm P.V.C. conduits on

ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. Rmt 250.00 64.59 16,147.37

CONVENTIONAL FIRE ALARM SYSTEM

192 Supplying, installing, testing and commissioning of CONVENTIONAL TYPE Fire Alarm

Control panel with battery back up for 8 hours normal operation and 15 minutes alarm

operation. The control panel, battery charger and necessary accessories, etc, shall be UL

listed.The panel shall be Below mentioned capacity, The panel shall consisting with 80

character LCD display and RS 485 for networking. with suitable Standard mounting Rack,

The panel shall have intigration facilty with BMS and also intigration facility with PA Panel etc

complete in all respects as per detailed specifications

a 16 Zone LS 1.00 44,094.74 Digitally signed

DEEPAK DEEPAK KUMAR MEHRA

21 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

193 Supplying, installing, testing and commissioning of convetional Manual pull station having an

integrally mounted MCP, HOOTER & P.A SPEAKER-6 Watts (Two way talk back). (3 in 1

type). Rate quoted shall include providing, fixing as 3 in 1 approved make Box.

194 Supplying, installing, testing and commissioning of convetional type Hooter with with

necessary mount ing accessories etc.

195 Supplying, installing, testing and commissioning of Convetional type Single action Manual

pull station necessary mounting accessories etc.,

196 Supply,installation, testing and commissioning of Conventional type photoelectric & smoke

detectors with dual chamber solid state design, indicating lamp, mounting base etc. shall be Each 186.00 3,500.25 6,51,046.99

UL / EN / CE listed as per detailed specification.

197 Supply, testing and commissioning of 1100V Grade 2 core x 1.5 sqmm PVC insulated FRLS

armoured cable for connecting detectors / devices to panels and main micro processor

control panels located in the respective floors including end termination with indentification

tags at each end, etc., complete.The quoted rates shall be inclusive of necessary juntion

boxes made of M.S 16 SWG with cutouts for incoming & outgoing cables in respective floors.

198 Supplying, installing, testing and commissioning approved make PVC conduits on RECESS

ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc. (

SHALL BE EMBEDDED IN CEILING DURING RCC ROOFING FOR EACH SHOP)

199 Supplying, installing, testing and commissioning approved make 20 mm dia. P.V.C. flexible

conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Rmt 25.00 40.99 1,024.74

FIRE PUMP ROOM EQUIPMENT

200 Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump of

horizontal centrifugal end suction backpull out type with gland packing and capable to

deliver 2280LPM (137 m³/ Hr) at 60 MWC with all necessary accessories like bronze

impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,

coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation

bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade No. 1.00 6,37,790.00 6,37,790.00

requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most

hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900

RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base

frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and

Foundation bolts etc. RCC foundation is under civil scope.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

22 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

201 Supply, Erection, testing & commissioning of Diesel Engine driven common stand by pump,

horizontal centrifugal end suction backpull out type with gland packing and capable to deliver

2280LPM (137 m³/ Hr) at 60MWC with all necessary accessories like bronze impeller,

stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, gear

box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes

providing and fixing fuel oil tank (capacity as per TAC requirements) with supports and

necessary pipe works for diesel engine, battery and battery charger to be connected to

control panel of diesel engine and exhaust silencer including necessary pipe work and

lagging, pump should have the dry run sensor provision, etc., and shall be automatic in

operation diesel engine control panel with 24V DC storage battery & its battery charger with No. 1.00 8,14,200.00 8,14,200.00

required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine

with required pipes / valves / fittings etc., as per TAC including all associated electrical

works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant

point. The pump shall coupled to Diesel engine, radiator water cooled type with speed of

1800RPM and complete set shall be mounted on common base frame. Batteries & battery

leads with stand, 200 liters capacity Fuel tank ( for 4 Hrs. operation ) with stand & gauge

glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if

required) coupling gaurd and other stanadrd accessories and foundation bolts, etc. complete.

RCC foundation is under civil scope.

202 Supply, erection, testing & commissioning of electrical motor driven Jockey pump of

horizontal centrifugal end suction back pull out type with gland packing and capable to

deliver 180LPM (10.8 m³/ Hr) at 60 MWC with all necessary accessories like bronze

impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting pad

and flexible connections at discharge end of the pipes, pump should have the dry run sensor No. 1.00 3,47,789.47 3,47,789.47

provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15

HP with speed of 2900RPM and complete set shall be mounted on common base frame. The

quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts

etc. RCC foundation is under civil scope.foundation is under civil scope

Control Panel for Fire pumps.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

23 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

203 Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of

cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter-connection, having

switchgears and accessories mounting and internal wiring, earth terminals, numbering etc.

complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with Set 1.00 1,80,105.26 1,80,105.26

enclosure protection class IP 42 as required. (a) 400 Amps. 4 Pole MCCB, 36 KA Thermal

Magnetic type with operating handle mechanism and changeover interlocking etc. and

necessary accessories (b) Voltmeter (0-500 Volts) with selector switch.(c) Ammeter (0-

500Amps.) with selector switch & CT's etc.(d) Set of 3 Phase indicating lamp.(e) Set of

AJ.bus bar Amps.

204 (a) Hydrant pump.

125 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism

and necessary accessories with 65 HP fully automatic star/ delta starter with over load

protection, current sensing type single phase preventor complete with all accessories and

internal wiring required for automatic operation, selector switch for local/remote,

auto/manual/OFFoperation. (c) Jockey pump for Hydrant 32 Amps. 4 Pole MCCB, 25 KA

Thermal Magnetic type with operating handle mechanism and necessary accessories with 15

HP fully automatic DOL starter with over load protection, current sensing type single phase

preventor complete with all accessories and internal wiring required for automatic operation, Set 1.00 59,993.68 59,993.68

selector switch for local/remote, auto/manual/OFFoperation. (d) Diesel Engine Control.

Control for Diesel Engine comprising:- (i) Auto/Manual selector switch & 3 attempt starting

device, timers and relays as required, push buttons, start/stop in manual mode. (ii) Indication

lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ON indication. (iii)

Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V

DC'<volt meter, 0-20A DC Ammeter. (iv) AII standard relays and accessories for automatic

operation of diesel engine.

205 Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh,

steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc.

The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For

cables laid out door the rate shall include earth excavation providing brick and sand

protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes.The

minimum size of the cables shall as mentioned below,

a 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump. Mtr 20.00 786.25 15,725.05

b 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Mtr 10.00 342.82 3,428.21

c 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 10.00 614.84 6,148.42

d 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 20.00 300.59 6,011.79

Digitally signed by

e 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking. Mtr DEEPAK

DEEPAK KUMAR MEHRA 7,999.16

24 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

206 Supplying and fixing of perforated G.I.sheet cable tray 150MM with neccessory angle iron

suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall

not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables. Rmt 20.00 1,329.05 26,581.05

207 Supply, fixing, testing and commissioning of electronic type level indicaor of approved make

with pressure transducer, alarm,sensors, LED display for indicating high, half full and low

level in sump (ground level reservoir) Rate quoted shall include for supply and laying

necessary armoured control cablling inside pumphouse (approx. length 30 meters) for

connecting sensors to panels located inside pumphouse, wiring from the control panel to

sensor probes, ON / OFF indicators etc. complete in all respects.

VALVES AND STRAINERS :

208 Supply, install, testing & commissioning of CI sluice valves of approved make as per IS 780

Class I with necessary flanged tail piece, compansion flanges, bolts, nuts, gaskets,

etc.,complete in all respects. PN 10 rating valve

209 Supply, Installation , Testing & Commissioning of MS Fabricated Pot/Basket Strainer with

accessories etc., complete.

210 Supply, Installation , Testing & Commissioning of NON RETURN VALVE with accessories

etc., complete.-PN16

211 Supplying, Installing, testing and commissioning CI Sluice valves as per BS 5155 ( PN 16)

slim seal standard lever operated type with required flanges, nuts, bolts etc. complete.

212 Supplying, Installing, testing and commissioning CI butterfly valves as per BS 5155 ( PN 10)

slim seal standard Gear operated type with required flanges, nuts, bolts etc. complete. (For

Delivery Header)

213 Supplying, Installing, testing and commissioning of Flow meter with necessary accessories as

per standard specifications etc complete.

214 Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves

with fittings of screwed end type.

a 25 mm nominal dia (for pressure switch manifold & air vessel tank) Nos 4.00 999.89 3,999.58

215 Supply and installation of differential Pressure switches of suitable range (0 to 12 bar) for

pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc. Set 5.00 6,713.58 33,567.89

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

25 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

216 Supply and installation of Pressure gauges of suitable range (0-16 bar), 110 mm diameter

dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / Set 4.00 3,785.94 15,143.75

217 Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250

mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia

connection for air release valve including legs, painting with red oxide primer and finished No. 1.00 36,424.74 36,424.74

with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto

pump header and other accessories etc.

218 Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool

insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe

medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum

sheeting and Pipe supports also.

Sub total for Fire Fighting system = 66,87,502.00

219 Supply and Fixing of Information System with the led p4 smd2525 ; pixel pitch 4 mm ; module

make brigade led pro ; brightness 6000 cd/m2 module size : 320 mm x 160 mm refresh rate

≥3840 ; gray scale 13 bit ; pixel resolution 80 x 40 (3200 dots) ; 62,500 cd/m2 viewing angle

140o control method synchronization driving method 1/8 scanning optimum view distance

≥4m working temperature 20oc~80o mtbf >100000 hrs. consumption ≤9.34 a per module

driving ic icn chip pcb thickness 2.2 mm pcb track gold alloys certificates ce, iso9001:2015

protection type front： ip65； rear： ip54 body type aluminium profile sending card huidu

c16c receiving card huidu r512 audio aux o/p yes service access back door open interface

usb and lan power supply yy (bis certified) wires copper with tin coated working environmen -

20°c to +60°c humidity range rh﹤ 95%（non-condensing）

Sub total for Passenger Info = 14,39,600.00

220 Supply and fixing of Three Seater Tandem with Arms , With Shiny Finishthe shell shall be

assembled on the cross beam with help 0f bolt and brackets with Product Dimensions : 64D x nos 50.00 21,004.00 10,50,200.00

180W x 80H cm; Style Contemporary ; Material : Chrome Steel

Sub total for three seater = 10,50,200.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

26 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

221 Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet : 25mm ; Type : Monoblock 1hp

PRESSURE SAND FILTER: Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material

of Construction : FRP Inlet / Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm

Media : Pebbles & Sylex and Sand. ACTIVATED CARBON FILTER: ; Make : PENTAIR or

Equivalent ; Flow rate : 1500 Lph ; Material of Construction : FRP ; Inlet / Outlet Connection :

25 mm; Multi port Valve Size : 25 mm ; Media : Cocount Shell Activated Carbon & Pebbles.

MICRON FILTER: ; Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ; Inlet /

Outlet Connection : ¾” mm ; Number of Cartridges : 2 Nos. of 20” Long ; Number of Housing

: 2 Nos. ; Working Pressure : 2 to 3 Kg / Sq. cm ; Filter Elements : 5Wound PP. ; RO nos 3.00 1,28,620.00 3,85,860.00

PLANT FRAME: Skid : Stainless Steel (SS 202 Grade) ; Thickness of square pipe : 1 inch ;

Thickness of sheet : 1.2 mm ; Method of cutting : Laser. Membrane: ; Material of

Construction : Thin Film Composite ; Make : ( FILMTEC/Brackish/Hydranatics ) ; No. of

Membranes : 2 Nos. Dimension : 40” x 40” Type of membrane : Sprial Wound. HIGH

PRESSURE PUMP: Material of Construction : SS 304 Make :CRI (2-16) ; Type : Vertical

Multi Stage ; Motor Power : 2 HP ; Flow Rate : 1500 LPH. ; INSTRUMENTS : ; ACcord 1:3

Panel with Automatic Float – 1no; Flowmeter – 2no”s; SS Pressure Gauges - 2no”s ;

Solenoid Valve – 1no. Float - 1no. ; Dosing Pump E-Dose - 1no

Sub total for RO = 3,85,860.00

222 5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing

masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Each 4.00 3,815.97 15,263.88

charcoal / coke and salt as required

223 5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe Each 4.00 4,355.34 17,421.36

of 2.7 meter long etc.but without charcoal / coke and salt as required

224 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth

electode , including connection / termination with GI thimble etc. as require

225 5.8 Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth

electrode , including connection / terminating with nut , bolt, spring , washer etc.as required.

(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer

spached at 50mm)

226 5.9 Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip earth

electrode , including connection / terminating with G.I. nut , bolt, spring , washer etc.as

required. (Jointing shall be done by overlapping and with 2 sets of G.I.nut bolt & spring

washer spached at 50mm)

227 5.14 Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc

228 5.15 Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc . as

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

27 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

229 5.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as

230 2.5.3 Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution

board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar ,

earth bar , din bar , interconnections , powder painted including earthing etc. as required (But Each 44.00 5,412.06 2,38,130.64

without MCB / RCCB / Isolator) -12 way (4+36) , double door

231 1.10.3 Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class pvc

conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Point 540.00 590.15 3,18,678.30

sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C

232 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC conduit , 2 way modular switch ,

modular plate , suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc.as required

233 1.55.3 Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point

(without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed PVC conduit , and earthing the point 1.5 sq.mm FRLS PVC Point 256.00 337.79 86,472.96

insulated copper conductor single core cable etc.as required - Group C

234 TN SOR SD Supply and fixing of meter board suitable for 32A three phase service connection with 3 Nos.

127,P.NO58 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size

600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting

with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter

connection with 7/20 PVC insulated copper wire from EB meter to fuse unit

235 1.24.1 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - 5/6 A switch Each 142.00 47.78 6,784.05

236 1.24.3 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - 15/16 A switch Each 101.00 85.11 8,596.11

237 1.24.4 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket Each 220.00 69.65 15,321.90

238 1.24.5 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - 6 pin 15/16 A Each 101.00 121.01 12,221.51

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

28 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

239 1.24.6 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - Telephone socket Each 60.00 73.92 4,435.20

240 1.24.7 Supplying and fixing following modular switch / socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required - TV antenna socket Each 13.00 74.14 963.79

241 1.27.1 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)

242 1.27.2 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 3 module (100mm x 75mm)

243 1.27.3 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 4 module (125 mm x 75 mm)

244 1.27.4 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 6 module (200 mm x 75 mm)

245 1.27.5 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 8 module (125 mm x 125 mm)

246 1.27.6 Supplying and fixing following size / modules , GI box alongwith modular base & cover plate

for modular switches in recess etc. as required - 12 module (125 mm x 125 mm)

247 1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed Meter 875.00 50.22 43,942.50

conduit as required. 20mm

248 1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed Meter 775.00 60.44 46,842.94

conduit as required. 25mm

249 1.21.3 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed Meter 1,075.00 77.69 83,511.38

conduit as required. 32mm

250 1.21.4 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed Meter 875.00 99.64 87,182.81

conduit as required. 40mm

251 1.21.5 Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed Meter 775.00 129.78 1,00,579.50

conduit as required. 50mm

252 1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Meter 755.00 91.00 68,703.11

conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

253 1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Meter 1,620.00 108.13 1,75,166.55

conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

29 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

254 1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Meter 1,200.00 129.35 1,55,223.00

conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

255 1.14.4 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC Meter 1,000.00 174.11 1,74,112.50

conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

256 Supply Of ceiling fan sweep 1250mm fusion -50 energy saving fan five star make -

Havells/Almonard/Usha

257 1.44 Installation , testing and commissioning of ceiling fan , including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper conductor , single Each 138.00 835.52 1,15,301.07

core cable etc as required

258 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 29.00 1,755.00 50,895.00

259 1.50.1 Installation of exhaust fan in the existing opening , including making good the damage ,

connection , testing , commissioning etc. as required - Upto 450 mm sweep

260 Supplying, Installation, testing and commissioning of 36/40Watt LED Ceiling light including

cost of material, labour etc., complete.

261 Supplying, Installation, testing and commissioning of 20/22Watt 4 Feet LED Tube Light

including cost of material, labour etc., complete.

262 1114 Supplying, Installation, testing and commissioning of 2 Tonne A.C 3 Star Rating including

cost of material, labour etc., complete.

263 1111 Supplying, Installation, testing and commissioning of Geyser/Water Heater including cost of

material, labour etc., complete.25 ltrs. Storage water heater- ABS Make: Almonard/Venus/V- Each 7.00 7,000.00 49,000.00

264 4.6.6 Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray

(galvanization thickness not less than 50 microns) with perforation not more than 17.5% , in

convenient sections , joined with connectors , suspended from the ceiling with

G.I.suspenders including G.I.bolts & nuts , etc .as required - 450 mm width

265 4.7.6 Supplying and installing following size of perforated Hot dipped galvanised iron cable tray

"bends" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in

convenient sections , joined with connectors , suspended from the ceiling with Each 8.00 1,646.42 13,171.38

G.I.suspenders including G.I. bolts & nuts , etc.as required - 450 mm width x 50 mm depth x

2.0 mm thickness

266 4.8.6 Supplying and installing following size of perforated Hot dipped galvanised iron cable tray

"Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in

convenient sections , joined with connectors , suspended from the ceiling with Each 8.00 1,940.42 15,523.38

G.I.suspenders including G.I.bolts & nuts . As required - 450 mm width x 50 mm depth x 2.0

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

30 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

267 4.9.6 Supplying and installing following size of perforated Hot dipped galvanished iron cable tray

"Cross member" (galvanisation not less than 50 microns) with perforation not more than

17.5% , in convenient sections , joined with connectors , suspended from the ceiling with Each 8.00 1,940.42 15,523.38

G.I.suspenders including G.I.bolts & nuts , etc .as required - 450 mm width x 50 mm depth x

2.0 mm thickness

268 4.10.6 Supplying and installing following size of perforated Hot dipped galvanised iron cable tray

"Reducer" (galvanisation not less than 50 microns) with perforation not more than 17.5% ,in

convenient sections , joined with connectiors , suspended from the ceiling with Each 8.00 2,840.62 22,724.94

G.I.suspenders including G.I.bolts & nuts , etc.as required - 450 mm width x 50 mm depth x

2.0 mm thickness

Sub total for Eletrical = 35,51,209.23

269 Approved Rate Design, Supply, erection, testing and Commission of 22KV/433V, 315 kVA 3 phase

Distribution Transformer Level 2 Enenrgy efficient with Oil Temperature Indicator., Earthing

terminals - 3 nos., Pre-filled Silica-gel breather. Lifting lugs for complete transformer.

Thermometer pocket., Oil filling pipe with cap on tank cover/conservator., HV TERMINALS

with Porcelain Bushings, LV TERMINALS Indoor Type Porcelain Bushings with LT Cable

box., Bi-metallic connectors on HT side., Oil level indicator on the Oil Conservator., 4 set of

wheels for movement., Drain cum sampling valve - 1 no., Filter Valve with plug - 1 no.,

Pressure relief explosion vent with diaphragm, Externally operated off circuit tap changer

switch with handle including all other accessories etc., complete; Rating (KVA) -315

KVA,No Load Voltage Ratio [KV] -22 / 0.433 KV; Rated Current [Amp] -13.12 /333.35

Amps; Vector Group -Dyn11 ; Tapping Range -+5% to -10% @ 2.5% Tap – Changer -Off

Circuit Tap Changer; Steps -6 Steps, 7 Positions ; Temp. Rise (Oil/Wdg.) -40 / 45 °C; Set 1.00 8,50,000.00 8,50,000.00

3TERMINATION: H.V / L.V Cable Box / Cable Box; Paint- Epoxy to Shade 631 of IS 5; Oil

Temperature Indicator with A/T contacts ,Winding Temperature Indicator with A/T

contacts,Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves ,Marshalling

Box,Magnetic Oil Level Gauge with Alarm Contact ,1 No. Neutral CT of ratio 630 / 1A, 5P20,

15VA ,All following standard fittings will be provided in the transformer ,Rating and terminal

marking plate - 1No,Earthing terminals - 2 Nos ,Lifting lugs - 2 Nos ,Thermometer pockets -

1N,Air Release Device - 1No ,Bottom channels - 1Set,Drain valve with plug at Bottom- 1No

,Filter valve with plug at top- 1No,Oil conservator with drain plug- 1No ,Oil filling hole with

cap in Conservator- 1No,Plain oil level gauge- 1No,Dehydrating silica gel breather- 1No

,Explosion vent with double diaphragm- 1No ,Bi-directional Flat Rollers- 4No, IS 1180

270 PSR Code No:5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing

masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 2.00 3,815.97 7,631.94

charcoal / coke and salt as required. (Electrical SOR: Item No:5.2)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

31 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

271 PSR Code No:5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe

of 2.7 meter long etc.but with charcoal / coke and salt as required. (Electrical SOR: Item

272 PSR Code No:5.8 Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth

electrode , including connection/ terminating with nut , bolt, spring , washer etc.as required.

(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer

spached at 50mm) (Electrical SOR: Item No:5.8)

273 PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as

No:5.17 required (Electrical SOR: Item No:5.17)

Sub total for Transformer = 9,00,834.45

Outer Eletrical Work

274 Approved Rate Design Supply & delivery of 22 KV ,3 pole modular extensible type outdoor SCADA

compatible SF6 insulated ring main units comprising of 3 way ring main units with 1

potential transformer and 1 FRTU ,FPI and MODEM (2 Nos of Load break switch

SCADA Compatible and 1 No of circuit breaker) with 1 No ALBS nearer to the 315 KVA

Transformer and allied accessories : Motorised Fabrication, Supply, Installation, Testing

and Commissioning of 22 KV Outdoor RMG HT Panel with 2 Nos LBS and 1no.22KV VCB :

VCB-Drawout - 22kV 630A 31.5kA drawout type Vacuum Circuit breaker with 230Vac Motor

dc closing/opening shunt , aux .contact - 6 NO + 6 NC (AC source to be organised by client) -

ABB MAKE,Out going - 1 No.LBS - 22kV 630A 26.3kA Load Break switch,Incomer - 2Nos,PT-

Fixed type - Potential transformer - Epoxy resin cast - 1 PH,Ratio : 22kV/110V,Core : 15VA

CL0.2 accy,Out going - 3 Nos,Current Transformer - Current Transformer Epoxy resin

cast,Ratio :5-5A,Core 1 : 0.2S/5VA per phase for Metering,Core 2 : 5P20/15VA for protec. Set 1.00 12,98,000.00 12,98,000.00

Rise (Oil/Wdg.) -40 / 45 °C; 3TERMINATION: H.V / L.V Cable Box / Cable Box; Paint- Epoxy

to Shade 631 of IS 5; Oil Temperature Indicator with A/T contacts ,Winding Temperature

Indicator with A/T contacts,Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves

,Marshalling Box,Magnetic Oil Level Gauge with Alarm Contact ,1 No. Neutral CT of ratio

630 / 1A, 5P20, 15VA ,All following standard fittings will be provided in the transformer

,Rating and terminal marking plate - 1No,Earthing terminals - 2 Nos ,Lifting lugs - 2 Nos

,Thermometer pockets - 1N,Air Release Device - 1No ,Bottom channels - 1Set,Drain valve

with plug at Bottom- 1No ,Filter valve with plug at top- 1No,Oil conservator with drain plug-

1No ,Oil filling hole with cap in Conservator- 1No,Plain oil level gauge- 1No,Dehydrating

silica gel breather- 1No ,Explosion vent with double diaphragm- 1No ,Bi-

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

32 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

275 Motorised Fabrication, Supply, Installation, Testing and Commissioning of 22KV

Outdoor Panel (Near RMG) - 22KV Outdoor HT Panel : LBS - 22kV 630A 26.3kA Load

Break switch,Incomer - 2Nos,Indications/Switches/Annunciator: ON/OFF Indication Lamp

Outdoor/Incomer 2 Nos,Thermostat controlled Anti condensation Space Heater with switch

Outdoor/Incomer 1 Nos,Door switch actuated CFL for panel illumination Outdoor/Incomer 1 Set 1.00 2,28,920.00 2,28,920.00

Nos,MCB for AC/DC control circuits Outdoor/Incomer 2 Nos,Disconnecting/Non

disconnectiong type control terminals Outdoor/Incomer 2 No,Common Items ; Aluminium bus

bar Outdoor/Incomer 1No, Outdoor Panel Outdoor/Incomer 1No shall be fitted with FPI, VPI

and SCADA Compatible Type

276 Supplying & Transportation of 22 KV 3CX185 Sqmm XLPE HT Cable from 22 KV outdoor

panel to 22 KV LBS panel and then to 315 KVA transformer.

277 Supplying & Transportation of 22 KV 3CX185 Sqmm XLPE HT Cable jointing kit with

acessories i)Indoor - 5 Nos.

278 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete. MAIN

MV PANEL EB Incomer : 1 No 630A 4Pole ACB MDO Type DG Incomer: 1 No 400A 4Pole

ACB MDO Type Busbar: 630A TPN Aluminium Busbars 35KA per 1 Sec. All the neutral

busbars shall have half the capacity of phase busbars Outgoing : 7 Nos 63 A TPN MCCB

25KA 1 No 100 A TPN MCCB 25KA 3 No 400 A TPN MCCB 25KA 1 No Space for Solar

279 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

CAPACITOR PANEL -75KVAR Incomer: 1 No 400A TPN MCCB- 36KA Busbar: 400A TPN

Aluminium Busbars 35KA per 1 Sec. All the neutral busbars shall have half the capacity of

phase busbars Outgoing :3 Nos 32 A TPN MCCB 25KA2 Nos 63 A TPN MCCB 25KA1 No

100 A TPN MCCB 25KA1 No 70A Contactor Capacitor duty2 Nos 40A Contactor Capacitor

duty1 No 20A Contactor Capacitor duty2 Nos 16A Contactor Duty1 No 25KVAR Capacitor2

No 15KVAR Capacitor1 No 10KVAR Capacitor2 Nos 5KVAR Capacitor1 No APFC Relay

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

33 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

280 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

GROUND FLOOR PANEL-1 Incomer: 1 No 63A TPN MCCB-36KA Burbar: 63A TPN

Alumnium Busbars a) Compartment type outgoing 2 Nos-3 Phase. Each outgoing shall have Set 1.00 1,15,640.00 1,15,640.00

1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase).

1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB-

25KA b) Compartment type outgoing 10 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 25A DP MCB

281 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

GROUND FLOOR PANEL-2 Incomer: 1 No 63A TPN MCCB-36KA Burbar: 63A TPN

Alumnium Busbars a) Compartment type outgoing 2 Nos-3 Phase. Each outgoing shall have Set 1.00 1,15,640.00 1,15,640.00

1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase).

1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB-

25KA b) Compartment type outgoing 10 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 25A DP MCB

282 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

GROUND FLOOR PANEL-3 Incomer: 1 No 63A TPN MCCB-36KA Burbar: 63A TPN

Alumnium Busbars a) Compartment type outgoing 2 Nos-3 Phase. Each outgoing shall have Set 1.00 1,25,080.00 1,25,080.00

1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase).

1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB-

25KA b) Compartment type outgoing 11 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 25A DP MCB

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

34 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

283 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

GROUND FLOOR PANEL-4 Incomer: 1 No 63A TPN MCCB-36KA Burbar: 63A TPN

Alumnium Busbars a) Compartment type outgoing 2 Nos-3 Phase. Each outgoing shall have Set 1.00 1,08,560.00 1,08,560.00

1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3 Phase).

1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB-

25KA b) Compartment type outgoing 7 Nos-Single Phase. Each outgoing shall have 1

metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1

switch compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 25A DP MCB

284 Fabrication, Supply, Installation, Testing and Commissioning of Cubicle Panel board, Floor

mounted fabricated out of 16 SWG CRCA Sheet, Compartmentalized with hinges door, dust

& vermin proof powder coated of approved shades. The doors and partition fabricated

18SWG CRCA sheet. S set of RYB indication lamps , ammeter, voltmeter with selector

switches , aluminium busbars with suitable rating 2 Nos earth terminals etc., complete.

FIRST FLOOR PANEL Incomer: 1 No 100A Porcelain Fuse carriers, 1No Neutral link, 1 No Set 1.00 1,55,760.00 1,55,760.00

Earth link Outgoing: 6 Nos 40A TPN MCCB, 2 Nos 63A TPN MCCB Burbar: 100A TPN

Alumnium Busbars Wall mounting type fabricated with 16 SWG CRCA sheet enclouser, Door

and partition 18 SWG CRCA sheet. The Panel shall be complete with iterconnections and

earthing etc., All door should have proper locking/ sealing arrnements.

285 TN SOR SI.No- Supply, Transportation unloading, installation, testing and commissioning of Phase

18b,P.NO-138 Segregated 6Way DB comprising of the followings and including all other accessories etc.,

(TN PWD SOR P.No-138,SI.NO-18b) Incomer: 1 No 40A 30MA ELMCB Outgoing: 3 Nos Set 7.00 7,150.80 50,055.60

25A DP MCB, 18 Nos 6/25A SP MCB The Panel shall be complete with iterconnections and

286 TN SOR SI.No- Supply, Transportation unloading, installation, testing and commissioning of Phase

18c,P.NO-138 Segregated 8 Way DB comprising of the followings and including all other accessories etc.,

(TN PWD SOR P.No-138,SI.NO-18c) Incomer: 1 No 63A 30MA ELMCB Outgoing: 3 Nos Set 2.00 7,975.62 15,951.24

32A DP MCB, 24 Nos 6/25A SP MCB The Panel shall be complete with iterconnections and

287 TN SOR SI.No- Supply, Transportation unloading, installation, testing and commissioning of Phase

18a,P.NO-138 Segregated 4 Way DB comprising of the followings and including all other accessories

etc., (TN PWD SOR P.No-138,SI.NO-18a) Incomer: 1 No 40A 30MA ELMCB Outgoing: 3 Set 1.00 6,328.34 6,328.34

Nos 25A DP MCB, 12 Nos 6/25A SP MCB The Panel shall be complete with iterconnections

and earthing etc.,

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

35 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

288 TN SOR SI.No- Supply, Transportation unloading, installation, testing and commissioning of Power

11c,P.NO-139 Distribution Board VTPN Type 8 Way comprising of the followings and including all other

accessories etc.,(TN PWD SOR P.No-139,SI.NO-11c) Incomer: 1 No 40A TPN MCCB Set 1.00 13,570.00 13,570.00

Outgoing: 8 Nos 16/20/32A TPN MCB The Panel shall be complete with iterconnections and

289 TN SOR SI.No- Supply, Transportation unloading, installation, testing and commissioning of Power

13a,P.NO-138 Distribution Board VTPN Type 8 Way comprising of the followings and including all other

accessories etc.,(TN PWD SOR P.No-138,SI.NO-13a) Incomer: 1 No 40A TPN MCCB Set 1.00 10,779.30 10,779.30

Outgoing: 4 Nos 6/16A TPN MCB The Panel shall be complete with iterconnections and

290 PSR Code Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet , with 2 pole and earth ,

No:2.18 metal enclosed plug top alongwith 20 A "C" curve , SP,MCB, in sheet steel enclousure , on

surafce or in recess , with chained metal cover for the socket out let and complete with Set 36.00 743.42 26,762.94

connections , testing and commissioning etc.as required. (Electrical SOR: Item No:2.18)

291 PSR Code No:5.2 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing

masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 2.00 3,815.97 7,631.94

charcoal / coke and salt as required. (Electrical SOR: Item No:5.2)

292 PSR Code No:5.4 Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering pipe

of 2.7 meter long etc.but with charcoal / coke and salt as required. (Electrical SOR: Item

293 PSR Code No:5.8 Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth

electrode , including connection / terminating with nut , bolt, spring , washer etc.as required.

(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer

spached at 50mm) (Electrical SOR: Item No:5.8)

294 PSR Code Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as

No:5.17 required (Electrical SOR: Item No:5.17)

295 TN SOR SI.No- Supply and transportation of following LT 1100V grade PVC Aluminium Armoured Under

V1,P.NO-124 ground cable as per specification confirming to IS:7098 (Part - I)./1554-I

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

36 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

296 PSR Code Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade

No:7.1.1 of following size direct in ground including excavation , sand cushioning, protective covering

and refilling the trench etc.as required - Upto 35 sq.mm. (Electrical SOR: Item No:7.1.1)

297 PSR Code Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade

No:7.1.2 of following size direct in ground including excavation , sand cushioning, protective covering

and refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm (Electrical

SOR: Item No:7.1.2)

298 PSR Code Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade

No:7.1.3 of following size direct in ground including excavation , sand cushioning, protective covering

and refilling the trench etc.as required - above 95 sq.mm and upto 185 sq.mm (Electrical

SOR: Item No:7.1.3)

299 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

No:7.7.1 1.1 kV grade of following size on wall surface as required - upto 35 sq.mm (clamped with Meter 1,279.90 20.12 25,754.79

1mm thick saddle) (Electrical SOR: Item No:7.7.1)

300 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

No:7.7.2 1.1 kV grade of following size on wall surface as required - above 35 sq.mm and upto 95

sq.mm (clamped with 25 x3mm MS flat clamp) (Electrical SOR: Item No:7.7.2)

301 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

No:7.7.3 1.1 kV grade of following size on wall surface as required - above 95 sq.mm and upto 185

sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.7.3)

302 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1

No:7.8.1 kV grade of following size on cable tray as required - upto 35 sq.mm (clamped with 1 mm Meter 25.00 16.93 423.19

thick saddle) (Electrical SOR: Item No:7.8.1)

303 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1

No:7.8.2 kV grade of following size on cable tray as required - above 35 sq.mm and upto 95 sq.mm Meter 25.00 39.31 982.69

(clamped with 1 mm thick saddle) (Electrical SOR: Item No:7.8.2)

304 PSR Code Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

No:7.8.3 1.1 kV grade of following size on cable tray as required - above 95 sq.mm and upto 185

sq.mm (clamped with 25 / 40 x 3mm MS flat clamp) (Electrical SOR: Item No:7.8.3)

305 PSR Code No:7.9 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement :2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the bottom

and 50 cm x 50 cm at the top with a thickness of 10 cm including inscription duly engraved as

required. (Electrical SOR: Item No:7.9)

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

37 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

306 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.27 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 185 sq.mm (57mm) (Electrical SOR: Item No:9.1.27)

307 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.25 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 120 sq.mm (45mm) (Electrical SOR: Item No:9.1.25)

308 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.24 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 95 sq.mm (45mm) (Electrical SOR: Item No:9.1.24)

309 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.23 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 70 sq.mm (38mm) (Electrical SOR: Item No:9.1.23)

310 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.21 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 35 sq.mm (32mm) (Electrical SOR: Item No:9.1.21)

311 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.20 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 31/2 X 25 sq.mm (28mm) (Electrical SOR: Item No:9.1.20)

312 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.33 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 4 X16 sq.mm (28 mm) (Electrical SOR: Item No:9.1.33)

313 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.32 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 4 X10 sq.mm (25 mm) (Electrical SOR: Item No:9.1.32)

314 Supply and transportation of following LT 1100V grade Copper Armoured Under ground

cable as per specification 3 x 6 Sqmm

315 PSR Code Supplying and making end termination with brass compression gland and aluminium lugs

No:9.1.7 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of

1.1 kV grade as required - 3 X6 sq.mm (22 mm) (Electrical SOR: Item No:9.1.7)

Sub total for outdoor Eletrical = 43,51,826.00

Street light Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

38 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

316 17.2.2 Supply and erection MS swaged tublar pole with base plate and single ornamental bracket

two coats coats of zinc chromate and two coats of aluminium / epoxy painting. Pole height-8

mt. Pole dimension 139.7 x 4.5 x 4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x

1750mm, bracket dimension 60.3 X 3.65mm x 2700mm - 1no, base plate dimension 300mm

x 300mm x 5mm, overall height - 9.5mts including excavation of earth column- 750x 750

x1650mm and cement concrete 1: 2: 4 of volume 750 x750 x 1650mm filling and capping

above ground level 450mm dia x 600mm height. One coat of zinc chromate and two coat of

aluminium / epoxy painting should be done after erection of the pole and inclusive of suitable

length 1.25mt.- 2 nos. of 40mm dia medium class GI pipe for cable raising as required.

317 17.2.7 Supply and erection MS swaged tublar pole at top with base plate and double ornamental

bracket two coats of zinc chromate and two coats of aluminium / epoxy painting. Pole height -

8mt. Pole dimension - 139.7 x 4.5 x 4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x

1750mm, bracket dimension 60.3mm x 3.65mm x 2700mm - 2no, base plate dimension

300mm x 300mm x 5mm. Overall height - 9.5mts. including excavation of earth 750x 750

x1650mm and cement concrete 1: 2: 4 of volume 750 x750 x 1650mm filling and capping

above ground level 450mm dia x 600mm height. One coat of zinc chromate and two coat of

aluminium/epoxy painting should be done after erection of the pole and inclusive of suitable

length 1.25mt.- 2 nos. of 40mm dia medium class GI pipe for cable raising

318 17.3.2 Supply and installation of 16 mtrs. High mast system with its accessories mast shaft shall be

in two sections , hot dip galvanised (as per BS 729 or equivalent) and suitable for wind

velocity as per IS 875-1987 (180 km /hour). It shall also include accessories for high mast

including head frame, stainless steel wire rope 6mm dia (7/19 construction) double drum per No 1.00 2,68,334.38 2,68,334.00

winch , which galvanized lantern carriage arrangement suitable for 12 (twelve) luminaries

symmetrically and its motorised control gear boxes and lighting final. (as per detailed

technical specification as shown in annexure - II)

319 1207 Supply of 48W LED Street Light Fitting(Philips / Havells ) No 36.00 4,147.50 1,49,310.00

320 Supply and fixing of 120 W LED street light as per specification of tender document on

existing poles including all accessories for retrofitting the existing SVL/MH fittings make No 12.00 4,473.34 53,681.00

philips/Havells/Crompton/Bajaj/Equivalent Make The rate is inclusive of all taxes

321 17.2.11 Fixing testing and commissioning of LED street light fittings on existing poles as required

Sub total for street light = 11,17,721.00

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

39 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

322 31.280.1K Supplying of 250 KVA Genset ,3 phase, 415 volts, 50 cycles, 0.8 power factor for electric

starting diesel generator comprising the following units:- (Kirloskar/Leyland/Ruston/ Greaves

Cotton/ Cummins make) water cooled and shall be of multi stroke, multi cylinders, cold

starting, developing not less than 309 BHP under normal temperature and pressure. The

engine shall conform to I.S. 10002 with latest amendments. It shall be capable of taking 10%

over load for one hour in every 12 hours of continous operation including 6 Nos. of anti

vibration pads.The engine shall be complete with the following accessories:Electrical starting

provision, engine cooling fan, fuel and lubricating oil filters, oil bath, air filter, lub oil pressure

gauge 400 litres capacity fuel tank mounted with engine, hour meter with exhaust manifold,

flexible pipe, 12 /24 volts electric starting equipment complete with starter, alternator and two

numbers of 12 volts with 25 plates battery of make AMCO/ STANDARD/ EXIDE/ DAGANITE

(with Guarantee cards) of adequate capacity and low lubricating oil pressure/high

temperature varying engine shut down devices.

The Acoustic enclosure shall have the following: Acoustic enclosure shall be powder coated

and fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type

construction. Powder coating is done after seven tank surface preparation process of sheet

metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam/Rock

Wool as acoustic material. Four hinged doors shall be provided to canopy, one door shall

have glass window for control panel.Base frame is fabricated either in ISMC channel or in

sheet metal. The base frame is rugged in construction and designed for mounting engine and

alternator, with cross members mounted on AVM. The base frame shall have provision for

mounting of acoustic enclosure and it is having provision of lifting hook for convenient lifting

of complete set, i.e. along with canopy, engine and alternator.Fuel tank shall be fabricated

out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with

inlet and outlet connections of suitable capacity.The Acoustic enclosure shall be Type test

approved as per CPCB norms. The average sound level, when measure in green field

condition (ISO m3744 OR 8528 PT 10) at 1-meter distance from all four sides shall be less

than 75-dBA average or as per CPCB norms. The average stabilized hot air temperature rise No 1.00 16,44,005.96 16,44,006.00

with in the canopy is maintained with in 10 C over and above ambient temperature.Acoustic

enclosure is suitable for Outdoor / Indoor installation. Lockable doors shall be provided.

Lockable fuel filling arrangement to be provided external to the canopy. Residential Silencer

is housed in the canopy.

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

40 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY No 1.00 16,44,005.96 16,44,006.00

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

The exhaust gasses shall be taken out through a suitable flexible pipe to prevent any back

pressure on the engine.Base frame sturdy, fabricated welded construction, channel iron /

sheet metal base frame for mounting the above engine and alternator.Standard Tools and

Spares:Double ended spanners complete set (small and big size sets) - 12 Nos.

(TAPARIA/GEDORGE/EVEREST make)Screw driver (30cm long) Taparia make .Screw

driver (45cm long) Taparia make .Cutting plyer.Diesel filter with elements - 2 Nos.Oil filter

with elements - 1 No.All the above accessories with complete set.AlternatorThe alternator

shall be of Crompton/Kirloskar/ Stamford/ELGI make, self excited, self regulated, screen

protected, drip proof alternator with static excitation system capable of developing 250 KVA

at 0.8 power factor 415 volts, 3 phase, 50 cycles, generally conforming to I.S.4722 under

normal condition, the voltage regulation will be plus or minus 5% of rated voltage. It shall be

with end shield/ball roller bearings complete.Control PanelA wall/pedestal mounting (cubical

type ) fabricated sheet steel construction suitable for manual operation, rated for system

output incorporating the following devices/instruments. The panel is made of 1.6mm sheet

with one/two hinged front door, bolted back totally enclosed and vermine proof. It shall be

with all electrical connections and internal copper wiring with proper color codings for internal

wiring. All control equipments and indicating instruments shall be mounted on the control

panel. The control panel shall have the following equipments:1 No. mps/Volt/Frequency

meter (96mm x 96 mm) 3 Nos. of suitable current transformers2 Nos. of suitable selector

switches for voltmeter and ammeter main switch rotary type on/off pilot lamp (Standard

make).1 No. input terminal board.1 No. out put terminal board1 No. Kilowatt hour meter (62.5

KVA and above)1 No. MCCB of suitable capacity L&T/CROMPTON make)-250 KVA /

323 PSR Code No:5.2 Marking earth pit of G.I. pipe for earthing pit with 40mm dia.G.I.pipe medium class of length

3.05m perforated with 46 nos of 12mm dia .holes,pipe lowered in bore holes of 150mm dia

and filled in with charcoal and salt in alternative layer of 300mm,the top of G.I.pipe shall be No 5.00 3,815.97 19,080.00

clamped Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround

covered with R.C.C precast slab etc as per I.E.Standards.

324 Approved Rate Providing & Fixing of suitable MS exhaust pipe including 2 Nos of MS bends(long),7 Nos of

MS flanges, MS pipe class B - 5 Rm as flexible exhaust pipe. The rate is inclusive of

transportation charges for shifting of welding machine and gas cutting set to site,consumption

of welding rod 10 SWG and cutting gas,providing fasteners of 10mm bolts/nuts/washers and

flange gaskets including labour charges etc. asper IE standard - 65mm dia exhaust Pipe (Up

325 Approved Rate Providing & Laying of aluminium cladding with 50mm thick glass wool slab with chicken mesh

and covered with 24 SWG aluminium sheet (the rate includes double calculation for flanges Sqm 4.00 1,550.00 6,200.00

& bends) asper I.E.standards

326 Approved Rate Supplying & Fixing of copper flat (25x3mm) for earthing arrangements including bolts and

327 Approved Rate Supplying & Laying of 3.5x300 sqmm underground aluminium PVC Cable (Poly

Meter 50.00 1,350.00 Digitally signed

cab/Havells/Paragon/suncab/Empire) DEEPAK DEEPAK KUMAR MEHRA

41 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36

NAME OF PROJECT : DEVELOPMENT OF EXISTING BUS STATION AS A SMART INTEGRATED BUS TERMINUS (4.5 ACRES) WITH 25000 SQFT COMMERCIAL

SPACE AT PUDUCHERRY

Bill of Quantity

S.No Code No/ DSR Description of Item

Unit Quantity Rate Amount

328 PSR Code Providing and termination of cable joint with suitable cable gland,cable socket etc.,complete -

No:9.1.16 3.5x300 sqmm cable

329 Approved Rate Design,fabrication and supply of 250 KVA DG Set AMF (Auto Main Failure) control panel with

EB Service and it consists of the following parts 1.200A 4P Power conductor L&T -2

Nos,2.24V Battery Charger - NHP - 1Nos,3.Auxiliary Relay - PLA-6 Nos,Auxiliary Conductor

C&S - 4 Nos,5.Indication Lamp 12 Nos idea- 12 Nos,6.Push Button - Rass controll-

2Nos,7.Selector Switch - Slazer - 4 Nos,8.Earth fault Relay-Electronic - 1 Nos,9. Multi

function Meter - Rizhab - 1No,10.Timer - Eapl- 2 Nos,11.LVM - L&T- 1No,12.30x10

Aluminium Bus bar,13.Necessary Power & Control wiring,14.Cubical made of 16/18 CRC

Sheet with siemens grey power coat

Sub total for Generator = 19,27,411.00

Total amount in Electrical Works = 1,18,49,001.21

Total amount in Electrical Works = 1,18,49,001.21

Digitally signed by

DEEPAK DEEPAK KUMAR MEHRA

42 of 42 KUMAR MEHRA Date: 2023.04.06 13:03:36