Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC VILL BUNGDAL DADHANI P O BADHANI DISTT PATHANKOT PIN 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹25.1 L | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates |
| 2 | L2₹27.9 LRejected-Finance 99 MODEL TOWN PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹27.9 L | L2 | Rejected-Finance Higher side quoted amount |
| Sl No | Description | Qty | Unit | satpal and brothers L2 | M/S CANTILEVER ENGINEERS L1 |
|---|---|---|---|---|---|
| 1.00 | Attending of day to day Repair and maintenance complaints to continue elect supply after rectify the faults or by replacement of eletrical items such as switches, sockets, regulators, fuse wires , distribution boards MCB (light/Power) lamp holders (bracket/Pandents/batten) bell/ buzzer, push button, ceiling rose, capacitors and other similar electrical items/ fittings etc, including providing of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length not exceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note:- (i) any accessories found unserviceable will be replaced and shall be paid under S&F under item No 02 to 33 of this Sch 'A' . (ii) one job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable. (iv) The contractor shall depute necessary man power on daily basis for rectifying the jobs including Sundays & holidays . (v) Cost of taking down of defective item under ser item No 02 to 33 will be considered in this item only. (vi) Not deploying the sufficient manpower to attend the complaint on same day or just next day the recovery will be made @150 per complain/day after that. | 2,500 | Each Job | 75 ₹1.9 L | 50 ₹1.3 L |
| 2.00 | S&F LED tube rod 20/22 watt (4ft), 240 volts | 120 | Each | 220 ₹26,400 | 170 ₹20,400 |
| 3.00 | S&F lamp LED 9/12 watt warm white type, 240 volts. | 100 | Each | 75 ₹7,500 | 70 ₹7,000 |
| 4.00 | S&F Flexible wire 23/0.0076, twin core twisted, PVC insulated copper stranded conductor. | 90 | RM | 10 ₹900 | 15 ₹1,350 |
| 5.00 | S&F PVC Wire single core multi strnderd FRLS of size 4.0 sq mm | 100 | RM | 30 ₹3,000 | 70 ₹7,000 |
| 6.00 | S&F PVC Wire single core multi strnderd FRLS of size 6 sq mm | 100 | RM | 40 ₹4,000 | 80 ₹8,000 |
| 7.00 | S&F Switch piano flush button single pole one way 5 amps 230 volts | 300 | Each | 14 ₹4,200 | 18 ₹5,400 |
| 8.00 | S&F Switch piano flush button single pole one way 15 amps 230 Volts | 150 | Each | 40 ₹6,000 | 65 ₹9,750 |
| 9.00 | S&F Socket 5 amps 5 pin flush type, 230 volts | 200 | Each | 30 ₹6,000 | 35 ₹7,000 |
| 10.00 | S&F Switch & Socket with box type 5 amps 5 pin flush type, 230 volts | 25 | Each | 50 ₹1,250 | 120 ₹3,000 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
20 Jan 2026, 6:00 pmClosed
GE (WEST) PATHANKOT
GE (WEST) PATHANKOT
REPAIR/MAINTENANCE TO CEILING FANS, PEDESTAL FANS, WALL MOUNTING FANS, VENTILATION FANS, VERTIFICAL DBS, SUB MAIN WIRING AND CONNECTED ALLIED WORKS AT PATHANKOT MIL STATION UNDER GE (WEST) PATHANKOT
2025_MES_745100_1
GE/PKT-87/2025-26
Open Tender
Miscellaneous Works
180 days
GE (WEST) PATHANKOT
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (WEST) PATHANKOT
₹80,000
28 Mar 2026
19 Dec 2025
22 Jan 2026
19 Dec 2025
20 Jan 2026
3 Jan 2026
Attending of day to day Repair and maintenance complaints to continue elect supply after rectify the faults or by replacement of eletrical items such as switches, sockets, regulators, fuse wires , distribution boards MCB (light/Power) lamp holders (bracket/Pandents/batten) bell/ buzzer, push button, ceiling rose, capacitors and other similar electrical items/ fittings etc, including providing of small pieces of electrical wire if required of size 1.5 sqmm to 2.5 sqmm single core and length not exceding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. (Note:- (i) any accessories found unserviceable will be replaced and shall be paid under S&F under item No 02 to 33 of this Sch 'A' . (ii) one job only will be considered for each bldg/Qtr per day irrespective of the No of points made serviceable. (iv) The contractor shall depute necessary man power on daily basis for rectifying the jobs including Sundays & holidays . (v) Cost of taking down of defective item under ser item No 02 to 33 will be considered in this item only. (vi) Not deploying the sufficient manpower to attend the complaint on same day or just next day the recovery will be made @150 per complain/day after that.
S&F LED tube rod 20/22 watt (4ft), 240 volts
S&F lamp LED 9/12 watt warm white type, 240 volts.
S&F Flexible wire 23/0.0076, twin core twisted, PVC insulated copper stranded conductor.
S&F PVC Wire single core multi strnderd FRLS of size 4.0 sq mm
S&F PVC Wire single core multi strnderd FRLS of size 6 sq mm
S&F Switch piano flush button single pole one way 5 amps 230 volts
S&F Switch piano flush button single pole one way 15 amps 230 Volts
S&F Socket 5 amps 5 pin flush type, 230 volts
S&F Switch & Socket with box type 5 amps 5 pin flush type, 230 volts
S&F Socket 15 amps 3/5 pin flush type, 230 volts
S&F Switch & Socket box type 15 amps 3/5 pin flush type, 230 volts
S&F Lamp holder insulated body with back plate for batten fittings
S&F Ceiling rose surface bakelite 3 terminals
S&F Bell ding dong type 230 volts single pole
S&F Fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100%
S&F Plug top 3 pin 5 amps AC 230 Volts
S&F Plug top 3 pin 16 amps AC 230 Volts
S&F Plastic laminated top sheet cover 3 mm thick of size 5"x5" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers with sunken pressed steel terninal box 1.6 mm thick of suitable size.
S&F Plastic laminated top sheet cover 3 mm thick of size 8"x5" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers with sunken pressed steel terninal box 1.6 mm thick of suitable size.
S&F Plastic laminated top sheet cover 3 mm thick of size 11"x9" all as required at site including cutting for fixing the existing switches, sockets, fan regulators & drilling holes for fixing screws and providing 4 Nos screws with washers with sunken pressed steel terninal box 1.6 mm thick of suitable size.
S&F Modular type switch 6 Amp one module
S&F Modular type switch 16 Amp one module
S&F Modular type Socket 6 Amp two module
S&F Modular type Socket 16 Amp two module
S&F Modular type fan regulator 6 Amp two module step type
S&F Modular type bell push 6 Amp one module
S&F Piano type bell push 5 Amp
M&L for point wiring for one light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit terminated in new Pre galvanised iron sunken box with having protective zinc coating and having thickness not less than 18 gauge of required size with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified .Note: colour coding is to be maintained .
M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H cable in existing PVC concealed conduit terminated in new Pre galvanised iron sunken box with having protective zinc coating and having thickness not less than 18 gauge of required size with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS-H as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).
S&F LED mirror light fitting 2 feet long 1x10 W complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.
S&F Bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using copper cable of sutable size from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
S&F Energy saving decorative LED 20W light fitting extruded PVC housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired making connections with copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.
Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard
S&F Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm FRLS-H insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit Medium grade with all fittings (ISI Marked) controlled by one switch including Pre galvanised iron sunken box with having protective zinc coating and having thickness not less than 18 gauge of required size & 3mm thick plastic/bakelite laminated sheet ISI marked for switches and sockets, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and as directed by Engr-in-charge.
All as per srl item No. 35 here-in-before but One 5 Amps socket point on same board with other switches
All as per srl item No. 35 here-in-before but One 5 Amps switch socket outlet point on an independent board.
All as per srl item No. 35 here-in-before but One bell point controlled by one 5 Amps bell push
All as per item No 35 above but for point wiring for power point with 2.5 Sqmm (nominal area) PVC insulated copper cable 1100 Volt grade drawn through and including heavy duty PVC conduit ISI marked as required at site along with accessories with 1.5 Sq mm PVC insulated stranded copper conductor cable connected to common earth dolly with all accessories for 15 Amps socket point.
S&F in replacement LED decorative post top lantern Gate light 40 to 45 watt IP 65 protection resistance to impact and corrosion glare, free and better uniformity milky version as per CG / Bajaj including taking down old unserviceable post of lantern fittings complete all as specified and directed.
M&L for Strip opening of ceiling fan 1200mm sweep and carrying out rewinding with proper grade/guage super enamelled copper winding wire so as to achieve original specifications i.e current rating and RPM (RPM test of ceiling fan with suitable tachometer will be done by contractor and shown to deptt , tachometer will be provided by contractor at their own expense) and all insulating materials (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed by Engr-in-Charge. Note :- 1.Under liability period ,in case winding or any accessory i.e capacitor, becomes non functional, it will be repaired without any extra cost within 5 days of complaints received.
All as per Srl item No 40 here-in-before but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed.
All as per Srl item No 40 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
S&F in replacement LED ceiling light 1 feet x 4 feet long, 48 watt AC 220 V recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & driver & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.
M&L for Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge.
M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
M&L for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.
M&L for Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified & directed.
M&L for electronic fan regulator 230V, stepped, socketed type complete.
M&L for ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed.
M&L for bell push 5 Amps 230 V, AC circuit complete all as specified and directed.
M&L for call bell ding dong 230 V AC circuit complete all as specified and directed by Engr-in-Charge.
M&L for Lamp holder, PVC/Polycarbonate type with back plate for batten fitting.
All as per item No 107 here-in-before but cable of cross sectional area 16 sq mm 2 core.
S&F in replacement Recess mounted LED fitting with high transmittance polycarbo
S&F in replacement energy saving decorative LED 20W box type (4 Feet), frame , light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.
S&F in replacement MCCB DB (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB's IK-09 flush mounted with 100 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including MCCB 63 Amps,ICs=100%ICu, 16kA four pole as in comer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCBs shall be measured and paid separately)
S&F in replacement sheet metal enclosure MCB distribution board. Single pole & neutral 230 Volts 12 way with IP-43 IK-09 protection double
door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
S&F MCB single pole 230 Volts any rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.
S&F MCB SPN 230 Volts any rating from 32 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 230 Volts 4 way, including suitable size copper bus bar and neutral link Gerin multi-9 fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
S&F in replacement MCB single pole 230 Volts any rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables.
S&F in replacement MCB SPN 230 Volts any rating from 32 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
S&F in replacement sheet metal enclosure MCB distribution board. Single pole & neutral 230 Volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
M&L for submain wiring with two single core FRLS-H insulated flexible copper conductor cable of sze 4 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification including taking down existing unserviceable submain wiring complete all as directed by Engr-in- charge.
nate diffuser 36 watt fit to 600x600 mm modular/pop/gypsum ceilling complete with including connecting electrically to ceiling rose using suitable size PVC insulated over all sheathed with flexible copper conductor all as required
S&F in replacement energy saving new generation 10 W LED bulk head luminaire with opal diffuser watt suitable for 10 W LED 6000K complete with LED lamp including connecting electricaly to ceiling rose using suitable size PVC insulated over all sheathed with flexible copper conductor all as required
M&L for submain wiring with two single core FRLS-H insulated flexible copper conductor cable of sze 6 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification including taking down existing unserviceable submain wiring complete all as directed by Engr-in- charge.
S&F in replacement 1100 volts grade heavy duty service cable PVC insulated aluminiuim conductor multistranded of size 16 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in twin core cable flat or circular complete all as specified by the Engineer in charge.
S&F in replacement LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp suitable bracket with all fixing accessories, impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 250 mm sweep, single phase, 230 Volts AC,1200 RPM,, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete.
S&F in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutters , 300 mm sweep, single phase, 230 Volts AC,1200 RPM,, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete.
S&F in replacement SLEEK surface mounted round downlight 12 W for soft diffused lighting ,powder coated CRCA sheet steel housing with high efficiency translucent acrylic in center complete fitting including taking down all fixing arrangement complete with all as specified and directed by Engr-in-Charge.
S&F in replacement 9W LED bollards light in cylindrical shape with opal acrylic diffuser and IP 65 protection including connecting electricaly to existing location using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required and directed by Engr-in-Charge.
S&F in replacement SLEEK surface mounted square downlight 15 W for soft diffused lighting ,powder coated CRCA sheet steel housing with high efficiency translucent acrylic in center complete fitting with all fixing arrangement complete including taking down with all as specified and directed by Engr-in-Charge.
S&F in replacement PVC medium grade 20/25 mm conduit incl complete fitting and fixture i.e. bend , elbow, suitable for fixing arrangement all as specified and directed by Engr In Charge.
S&F in replacement 1100 volts grade heavy duty cable PVC insulated aluminiuim conductor multistranded of size 10 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in twin core cable flat or circular complete all as specified by the Engineer in charge.
S&F in replacement decorative wall mounting fitting made out of polycarbonated suitable for and incl up to 10 watts LED bulb complete all as specified
Taking down carefully 1200/1400mm sweep ceiling fan any make from the hook of OTM/MD Accn carrying to the wksp including rehanging the same at existing position after cleaning, greasing and connecting up with PVC insulated copper flexible wire 3 x single core 1.0 Sqmm from ceiling rose to connector of fan complete all as specified and directed by Engr-in-Charge . NOTE :-1. PVC copper flexible wire 1.0 Sqmm single core( 3 runs each) shall be measured and paid separately under relevant item. 2. Total service time from taking down to rehanging must not exceed 3 Days. 3. T&P such as ladder and vechicle will be provided by contractor at their own expense .
S&F in replacement MCB three/four pole 415 volts any rating up to 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.
S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED amp including connecting up with three core flexible copper conductor cable of suitable size complete size.
All as per srl item No.81 here-in-before but ceiling fan of 1400 mm sweep. NOTE :-Srl No 2 & 3 taking down, cleaning greasing and rehanging shall be measured and paid under item 80 here-in-before. Note : 1.Under liability period ,in case winding or any accessory i.e capacitor, becomes non functional, it will be repaired without any extra cost within 5 days of complaints received.
S&F in replacement sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 230 Volts, complete with one single pole MCB of 20 amps earthing.
M&L for Painting of ceiling fans 1200/1400 mm sweep including blades complete with white synthetic enamel paint by spray painting to achieve a smooth and uniform finish (one coat) including scraping old existing paint, cleaning and filling up cavaties with suitable filler complete all as specified and directed by Engr-in-Charge. Note :-1.Painting of fans must be done before delivery of fan (after item srl No 81 & 82 complete ) by contractor to Deptt on same day.
All as per srl item No. 84 here-in-before but of size 6202 complete.Make NBC,SKF,URB
All as per srl item No. 84 here-in-before but of size 6203 complete.Make NBC,SKF,URB
Taking out existing defective/worn out condenser any size/make and material and labour for condensor of capacity 2.5 mfd ,220 V including making connections etc complete all as specified and directed by Engr-in-Charge.Make USHA,BAJAJ,CG
All as per srl item No.82 here-in-before but of capacity 4 mfd.Make USHA,BAJAJ,CG
All as per srl item No. 84 here-in-before but of size 6204 complete.Make NBC,SKF,URB
Taking down carefully exhaust fan 225mm to 450mm sweep from the existing any make including re-fixing in existing position after cleaning and greassing complete all as directed by Engr-in-Charge. NOTE :Total service time from taking down to rehanging must not exceed 3 Days .
All as per srl item No.82 here-in-before but of capacity 3.15 mfd .Make USHA,BAJAJ,HAVELLS
M&L for rewinding of stator assembly of exhaust fan/bracket fans/wall mounting fans/pedestal fans 375 to 450mm sweep after strip opening of motor with proper grade/guage of super enamelled copper wiring so as to achieve original specifications i.e current rating and RPM including all insulating materials, re-assembling and replacement of worn out nuts, bolts, rubber bushes, clamps etc complete all as specified and directed by Engr-in-Charge. Note :- Taking down cleaning, greasing and re-fixing in position shall be measured and paid under srl item No.81 here-in-before. Note :-1. RPM test of exhast fan with suitable tachometer will be done in the presence of Engineer -in -Charge. 2. No T&P will be provided by the Deppt. 3.Warranty period is 1 year,in case winding or any accessory i.e capacitor, ,becomes non functional within 1 year , it will be repaired without any extra cost within 5 days of complaints received. 4. Make of copper winding wire - HINDUSTAN/PRECISION/FINOLEX
All as per srl item No.92 here-in-before but of 225 size to 300 mm sweep. Note :-1. RPM test of exhaust fan with suitable tachometer will be done in the presence of Engineer -in -Charge. 2. No T&P will be provided by the Deppt. 3.Under liability period ,in case winding or any accessory i.e capacitor, becomes non functional , it will be repaired without any extra cost within 10 days of complaints received. 4. Make of copper winding wire - HINDUSTAN/PRECISION/FINOLEX
Taking out existing worn out Fan hook and material & labour for new Fan hook (of suitable size) for the ceiling fans of any size/make incl suitable size nut bolts duly fixed in place of exisiting hook including connecting and hanging of ceiling fan complete all as specified and directed by Engr-in-Charge.
Taking out existing worn out rubber reel, clamp and S&F of rubber reel with clamps, MS nuts, bolts heavy duty of suitable size for hanging of ceiling fan to hook etc complete all as directed.
Taking out rusted screws & M&L for screws for fixing to different type/make blades of ceiling fans complete.
Taking out worn out/cracked canopy and S&F canopy with screws to the celing fans of any size/make etc complete. (Set of 2 pieces)
Taking out rusted/worn out threaded down rod and S&F down rod made out of 15 mm dia medium grade GI pipe having one side thread and on other side hole or both side threaded/hole 1 feet long complete.
Taking out rusted/worn out threaded down rod and S&F down rod made out of 15 mm dia medium grade GI pipe having one side thread and on other side hole or both side threaded/hole 1.5 feet complete.
Taking out rusted/worn out threaded down rod and S&F down rod made out of 15 mm dia medium grade GI pipe having one side thread and on other side hole or both side threaded/hole 3 foot complete.
Taking out existing defective flexible wire of any size and M&L for PVC copper cable flexible wire of suitable size 1100 volts to connect from ceiling rose to ceiling fan/exhaust fan (not more than 1.0 Mtrs to each fan).
M&L for Painting to exhaust fans/bracket fans/wall mounting fans/pedestal fans up to 300 mm sweep of any make motor, body, blade and frame with one coat of synthetic enamel smoke grey paint by spray painting to achieve smooth and uniform finish incl removal of existing paint, filling up cavities with filler complete all as specified and directed by Engr-in-Charge. Note :-1.Painting of fans must be done before delivery of fan(After item srl no 86 & 87) by contractor to Deptt on the same day.
Taking down worn out blades of exhaust fan/wall mounting/padestal fan off size 225 to 300mm sweep and S&F new blades as per sample and make to the fan refixing in existing position etc complete.
All as per Srl item No. 103 here-in-before but 375 to 450mm sweep.
Taking down burnt/unserviceable PLC circuit from 1200/1400mm ceiling fan and S&F in replacement PLC circuit (Regulator based with box) of 1200/1400mm BLDC ceiling fans complete all as specified and directed.
Taking down worn out blades of ceiling fan off size 1200 to 1400 mm sweep and S&F new blades as per sample and make to the fan refixing in existing position etc complete.
Supplying, laying, jointing, commissioning and testing in replacement XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 35 sq mm 3.5 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc complete all as specified and directed by Engineer-in-charge.
All as per item No 107 here-in-before but cable of cross sectional area 25 sq mm 3.5 core.
All as per item No 107 here-in-before but cable of cross sectional area 16 sq mm 4 core.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
M&L for old size Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.
Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.
M&L for GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall / pole (Rates incl accessories such as bend, clamps, nuts bolts and washers req for fitting)
Supplying, jointing and testing in replacement heat shrinkable type out door end terminatin jointing kit, suitable for cable of size upto 25 Sqmm to 50 Sqmm, 3.5/4 core aluminium conductor 1100 Volts including making connections complete all as specified and directed by Engineer-in-Charge. Make : Raychem, 3M, Denson, M-seal
Supplying, jointing and testing in replacement heat shrinkable type straight through jointing kit, suitable for cable of size 25 to 50 Sqmm, 3.5/4 core aluminium conductor 1100 Volts including making connections complete all as specified and directed by Engineer-in-Charge. Make : Raychem, 3M, Denson, M-seal
S&F ball bearings suitable for ceiling fans/exhaust fans of size 6201 complete all as specified and directed by Engr-in-Charge complete.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
tender87.pdf
Tender Documents • 1.64 MB
BOQ_834312.xls
BOQ • 1.05 MB
Download all tender documents and submit your bid