Supply and Intallation of Electrification Work at newly workshop Lalitpur under EWD, Jhansi

Main LT Distribution Pannel

Compartmentalized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendible cubical with dully powder coated and required chemical process with 500A TPN Aluminum bus bar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing bus bar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L2100mm x H1800mm x W500mm approx..)

MAIN INCOMER FROM 250KVA Transformer

400 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

Multifunction Meter CL-1 (Rishabh/C&S/Schneider/Procom)

CT's 400/5A,15VA,Cl-1.0 Cast resin (Rishabh/Procom/C&S/Mediatec)

ON/OFF /TRIP Indicator Lamp (schneider/mediatec/c&s/Abb)

R,Y,B Phase Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

MCB In =6Amp, SP, 10kA for Control (ABB/C&S/Schneider/HPL)

ON/OFF /TRIP Indicator Lamp (schneider/mediatec/c&s/Abb)

CT shorting link (Rishabh/Procom/Mediatec/Connectwell)

SHUNT release (scneider/HPLc&s/ABB)

OU,OV.PHASE UB,SPP SYSTEM ON MAIN INCOMER (PROCOM/MINILEC/L&T)

OUTGOING FOR SUB DISTRIBUTION PANEL

320 Amp, 36kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

MCCB OUTGOING For STACK YARD MOTROISED CHAIN PULLEY

100Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

OUTGOING FOR D.G SET CHARGER

63Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL)

Power Connector 63Amp (Connectwell/FTC/Mediatec)

MCB OUTGOING FOR SPARE

63Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL)

Power Connector 63Amp (Connectwell/FTC/Mediatec)

OUTGOING For OUTDOOR LIGHTING

32Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

Power Connector 32Amp (Connectwell/FTC/Mediatec)

40Amp Contactor (Schneider/HPL/C&S/ABB)

LDR/Astronomical Programmable Timer (Schneider/Fusi/Legrand/Salec/ABB)

On / Off Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

Start/Stop Push Button (Schneider/C&S/ABB/FTC)

16mm Connector (Connectwell/FTC/MEDITEC/FONIX)

OUTGOING For GUARD ROOM DB

32Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

Power Connector 32Amp (Connectwell/FTC/Mediatec)

SUB L.T DISTRIBUTION PANEL

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Aluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L2100mm x H1800mm x W500mm aprox.)

INCOMER

320 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider//C&S/ABB)

Extended Rotary Handle for operating mechanism (Schneider//C&S/ABB)

Spreader link (Set of 4 Pcs.) (Schneider//C&S/ABB)

Phase Barriers (Schneider//C&S/ABB)

Multifuction Metre CL-1 (Schneider/HPL/C&S/ABB)

CT's 400/5A,15VA,Cl-1.0 Cast resin (Rishabh/Procom/C&S)

On / Off / Trip Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

R,Y,B Phase Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

MCB In =6Amp, SP, 10kA for Control (Schneider/HPL/C&S/ABB)

CT shorting link (Rishabh/Procom/AE)

Shunt release (Schneider/HPL/C&S/ABB)

OV,UV,PHASE UB, SPP SYSTEM IN MAIN INCOMER (PROCOM / MINILEC /L & T)

OUTGOING FOR OVEN DB

160 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 4 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OIL FIlTRATION PLANT DB

100 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 4 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING For FLOOR UTILITY

100 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 4 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING For CRANE HOIST Panel

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OUTGOING For LPDB Panel

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OUTGOING For Winding Section

100 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 4 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING For TESTING EQUIPEMENT DB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OUTGOING For SPARE

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OVEN SUB DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING FOR OVEN SUB DB

160 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S/ABB)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING FOR OVEN SUB DB 1,2,3,4

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OIL FITLRATION PLANT DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm approx.)

INCOMING OIL FIlTRATION PLANT DB

100 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S)

Phase Barriers (Schneider/HPL/C&S)

OUTGOING OIL FIlTRATION PLANT DB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

FLOOR UTILITY DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure sizeL800mm x H600mm x W200mm aprox.)

INCOMING For FLOOR UTILITY

100 Amp, 36kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING For FLOOR UTILITY

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

25Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

6 Amp to 32 Amp, 10kA, DP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

32 Amp 5-Pin Industrial Heavy Duty Plug & Socket (C&S/Schneider/ABB/Anchor)

CRANE HOIST DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING For CRANE HOIST DB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/ABB/C&S)

OUTGOING For CRANE HOIST DB

40Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

16Amp, 10kA, DP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L600mm x H400mm x W150mm aprox.)

INCOMEING For LPDB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

OUTGOING For LPDB

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

63Amp, 10kA, DP Miniature Circuit Breaker (Schneider/HPL/C&S)

16Amp, 10kA, DP Miniature Circuit Breaker (Schneider/HPL/C&S)

WINDING SECTION

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING For Winding Section

100 Amp, 36kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/ABB/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S)

Phase Barriers (Schneider/HPL/C&S)

OUTGOING For Winding Section

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

16Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

16Amp, 10kA, DP Miniature Circuit Breaker (Schneider/HPL/C&S)

TESTING EQUIPMENT DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING For TESTING EQUIPEMENT DB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OUTGOING For TESTING EQUIPEMENT DB

40Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

16Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

CABLE SUPPLY

Supply and laying of Power Cables, Aluminum stranded conductor, XLPE Insulated,cores laid up, pvc / xlpe tape innersheathed, single GI strip Armoured ,extruded pvc type ST2 sheathed,650/1100V grade as per IS 7098 (Part 1) 1988 of following sizes. (Make : KEI / Finolex / R.R KABLE

3.5 * 300sqmm Al, XLPE, arm

3.5 * 185sqmm Al, XLPE, arm

3.5c * 95sqmm Al , XLPE, arm

3.5c * 35sqmm Al, XLPE, arm

4c * 16sqmm Al, XLPE, arm

Supply and laying of Copper Cables,Solid Copper conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,Unarmoured/ Single Armoured ,extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988 or latest amendment (Make : KEI / Finolex / RR cable

4c x 6 sqmm copper, PVC, Armored /unarm cable

4c x 4 sqmm copper, PVC, Armored /unarm cable

4c x 2.5 sqmm copper, PVC, Armored /unarm cable

2c x 2.5 sqmm copper, PVC, unarm cable

CABLE TERMINATION - Aluminum cables

Arranging all materials like lugs, glands, nut bolts, hardware for termination of the 1.1 KV grade aluminum multi-core cables of the following sizes. The work involves cable glanding using brass plated heavy duty double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type Aluminum lugs by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. (Make: Hex/Comet/Dowells/MCI)

3.5c * 300sqmm Al, XLPE, arm

3.5c * 185sqmm Al, XLPE, arm

3.5c * 95sqmm Al , XLPE, arm

3.5c * 35sqmm Al, XLPE, arm

4c * 16sqmm Al, XLPE, arm

CABLE TERMINATION - Copper cables

Arranging all materials like lugs , glands , nut bolts , hardware , for termination of the 1.1 KV grade copper multi-core cables of the following sizes. The work involves cable glanding using brass plated heavy duty single compression glands, sizing the core leads, removing insulation, fixing suitable crimping type Aluminum lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. (Make: Hex/Comet/Dowells/MCI)

4c x 6 sqmm copper, PVC, Armored /unarm cable

4c x 2.5 sqmm copper, PVC, Armored /unarm cable

4c x 4 sqmm copper, PVC, Armored /unarm cable

2c x 2.5 sqmm copper, PVC, unarm cable

CABLE TRAY

Supply, fixing of Perforated type (GI Sheet) cable Tray made of 1.6mm thick sheet steel with all fixing / grouting & hanging arrangement including supply of GI "C" support channels / Steel angle / channel, suspension arrangement with threaded GI rods, anchor bolts / dash fasteners / bolts / nuts etc. as required.(Please note that all "T" Joints and "L" joints shall be Prefabricated type with circular design )

50 mm tray , 1.2mm thick, 25mm collar

100 mm tray , 1.2mm thick, 40mm collar

150 mm tray , 1.2mm thick, 40mm collar

300 mm tray , 1.2mm thick, 40mm collar

L type Cable Tray Joint 150 mm, 1.2mm thick, 40mm collar

L type Cable Tray Joint 100 mm, 1.2mm thick, 40mm collar

T type Cable Tray Joint 100 mm, 1.2mm thick, 40mm collar

T type Cable Tray Joint 150 mm, 1.2mm thick, 40mm collar

L type Cable Tray Joint 300 mm, 1.2mm thick, 40mm collar

T type Cable Tray Joint 300 mm, 1.2mm thick, 40mm collar

CABLE TRAY SUPPORTS

Supply, installation of hangers and supports for Bus duct & cable tray, cable tray of various width in one/two/three or five tier fashion either on one side of the wall or on two sides of the wall/column/truss or at other places as required as per drawing. The work involve fabrication of clamps, hooks, suspension rod or strip painted with two coats of red oxide and one coat afterward with paint as per the approved colour. Before fabricating, the contractor has to get the design approved.

GI ELECRTOD CHEMICAL EARTHING STATION

Supply, Installation, Testing & Commissioning of long life Maintenance Free Electrolytic galvanizes Earthing System. The Electrode shall be of pipe in pipe in strip technology with 3.0 mtr Long, of 40 x 6 mm GI. flat in 60mm dia & minimum 2.0 mm wall thickness GI Pipe, which does not require manual addition of water. The system should be with 60 kg environment friendly mineral filling compound for lowering resistance. The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. The earth electrode should have capable of bearing fault current of 25kA.

EARTHING CONDUCTORS

Supply, straightening, shaping, laying under ground/ laying on a cable tray/ laying in cement concrete trench the following sizes of hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays/ on the sides of the trenches, making joints where ever required and providing the hardwares and the terminating the hardwares and the termination to the equipment/ earthling station/ etc. Make ( Reputed )

25 mm x 3 mm GI flat

50 mm x 6 mm GI flat

50 mm x 6 mm CU flat

1C x 6 sq.mm. Cu Earthing Wire

Spaik Guard 4way 10 A with separate control switch (Make: Anchor/L&T)

32A 5 pin industrial plug &socket with 32 a fp 10 ka c curve MCB with Suitable encloser confirmed to IEC60309-1 &IEC-60309-2 with external impact strength 1K08 plug & socket and MCB (MAKE ANCHOR/l&T)

Anushree Electrical Engineers Private Limited