Repair and Renovation to Treasury Office Building at Katra.

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Using Second class Deodar Wood

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like Rak,KAJARIA make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of Rak, KAJARIA make in colour suchas White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (Double Charged) Rak, Kajaria Make

Providing and fixing wash basin with C.I.brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Flat back Wash basin size 550X400mm with a single 15mm C.P. brass pillars taps. (Hindware / Cera Make)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Hindware/ Cera Make)

Providing and fixing white vitreous china pedestal type water closet (Europen type W.C. pan) with seat and lid, 10 liter low level white P.V.C flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures coplete, including cutting and making good the walls and floors wherever required :- W.C pan with ISI marked white solid plastic seat and lid. (Hindware/ Cera Make)

Providing and fixing C.P. fitting (Jaquare Essco / Cera Make)

Bibcock

Long Nose

Angle Valve

Jet with Rod

C.P grating 4"

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C waste fittings complete :- 32mm dia

Towel rings 8" Dia

Towel Rail 2' long

P.V.C connection (1'-6") long

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board Rectangular shape 453x357mm

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with c.p brass brackets and guard rail complete fixed wutg 40mm long screws, rawl plugs, etc. complete.

Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations. a) applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm.

Renewing glass panes, with Putty & Nails wherever necessary : Float glass panes of thickness 4mm

Wall Painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams / liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work.

balwant singh

M/S SANJAY ABROL

Sohan Chand

Govind Ram

DEV RAJ SHARMA