CERTAIN BR AND EM REPAIRS AND MAINTENANCE TO HANGERS INCLUDING ANNEXES AT INS RAJALI ARAKKONAM

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge including Nainital or similar pattern in roof covering all as specified and as directed.

Dismantling corrugated or semi-corrugated Asbestos cement sheets/ translucent sheets in roof covering all as specified and as directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with galvanised 8mm dia 'J' hook/self tapping screws, all as specified and directed' Make :- Jindal/Tata Blue Scope Steel Ltd/Essar or equivalent make ISI marked as approved by GE. Note : (a) Sheets will be bent and shaped to match the existing roof shape as per required curvature/site requirements and height upto 35m and the same is deemed to be included in the quoted rates. (b) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the roof of Hangar shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (c) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall and roof gutters fixed with galvanised 8mm dia 'J' hook/self tapping screws all as specified and directed' Make :- Jindal/Tata Blue Scope Steel Ltd/Essar or equivalent make ISI marked as approved by GE. Note : (a) Sheets will be bent and shaped to match the existing roof shape and roof gutters as per required curvature/site requirements and height upto 35m and the same is deemed to be included in the quoted rates. (b) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the roof of Hangar shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (c) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook/self tapping screws in lieu of screw in roof, wall etc all as specified and as directed. Note : (a) Sheets will be bent and shaped to match the existing roof shape as per required curvature/site requirements and height upto 35m and the same is deemed to be included in the quoted rates. (b) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the roof of Hangar shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (c) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

S & F MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165

S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or gorged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of watertanks and similar work conforming to Fe-290 Gde E-165 all as specified and as directed

M & L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 all as specified and as directed

S & F in repairs Wind operated Turbo Ventilators of size 24 inches dia, material of construction for ventilator is High grade Industrial Aluminium of thickness not less than 0.5mm, material of construction for Hardware is stainless steel -304. Bearing shall be of steel is completely enclosed and dust proof integrated housing and aligned with each other, It shall have capability to rotate at nearly zero wind speed. Turbo ventilator shall have UV stabilized powder coated and capable of static balancing shall have high exhaust capacity and there shall not be any exhaust problem due to air back draft. Fixing arrangement shall have high quality rubberized hardware to prevent rain Ingress. All Turbo Ventilators are to be installed by manufacturer’s auth person only all as specified and directed. NOTE : (a) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the roof of Hangar height upto 35m shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (b) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

Taking down and Refixing Wind operated Turbo Ventilators of any size on the Hangars roof top by manufacturer’s authorize person, including fixing missing nut bolts, screws, bearings, greasing, etc all as specified and directed. NOTE : (a) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the roof of Hangar shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (b) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

M & L Greasing of hangar track in top and bottom of steel gate / hangar shutter for trouble free operation all as directed by Engineer-in- charge. (Note : Length of Each track shall be measured).

M & L two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including necessary preparation of surfaces all as specified and as directed.

Taking down existing shafts of hangar door wheel and overhauling to existing hangar door wheel through greasing, alignment, replacing the damaged ball bearings of suitable size making functionable and refixing the wheel in the same position complete all as specified and directed NOTE : Supply of ball bearings shall be measured seperately

Supply only Ball bearings of size /no. 6208 or equivalent as per site requirement complete all as specified and directed

Hacking out old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing fixing spring/clips all as specified and as directed by Engr-in-Charge

Taking down eaves gutters and rainwater pipes (any size or pattern), (height upto 40m) including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 160 mm bore PVC pipes, class I, 0.25 Mpa, single socket in any length with rubber ring jointed fixed to wall height upto 35m using suitable clamps (height upto 40m) complete all as specified

S&F 250 mm bore PVC pipes, class I, 0.25 Mpa, single socket in any length with rubber ring jointed fixed to wall height upto 35m using suitable clamps (height upto 40m) complete all as specified

Taking down steel rolling shutters gear operated or manual operated rolling shutters replacement of weared parts spring laths etc, crank handle ,bearings,crank shaft etc suitable sizes including any welding required where required and refixing at any height including greasing.(replacement parts measured seperately)

M&L for providing and fabricating mild steel 1. 0 mm thick black sheet as in top cover of rolling shutter fixed to wall in proper size ,shape & position suitable for rolling shutter complete all as specified .

S&F in repairs MS spring for rolling shutter size of spring 450 mm long inner dia not less than 65 mm and MS wire 6mm as approved .

S&F in repairs MS pipe heavy duty of 40 mm dia as in shaft of rolling shutter complete all as approved.

S&F lath section formed from cold rolled strip 1.25mm thick and width as required all as approved .

S&F guide channel 25mm width, depth of channel 65mm not less than 1.0mm thick as required.

Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge. NOTE : (a) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing upto roof of Hangar shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (b) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exc 1.5 Sqm and n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S & F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 and minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

Dismantling wall/ceiling board any thickness including cover fillets complete

S & F in repairs Anodised aluminium snap grid frame work of size 605 x 605mm, for false ceiling, including necessary fixing arrangement with ceiling all as specified

S & F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete.

M & L for preparing new false ceiling of gypsum board surfaces and applying two coats of plastic emulsion paint over one coat of primer complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc complete all as specified and as directed by Engr-in-charge.

Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.

All as per item No.37 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:3.

Taking shutters of any description exc 1 sqm and n exc 2 sqm all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

Supply and fix 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.

Supply and fix 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.

Supply and fix door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.

Supply and fix 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.

M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified & directed.

S & F in repairs 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F in repairs 600mm dia, 2mm thick embossed clear polycarbonate profile base plate of size 1050mm x 1800mm for turbo ventilators fixed with L-type or J-type or cranked hook/self tapping screws in lieu of screw in roof, etc complete all as specified and as directed.

S & F in repairs 6 to 8mm thick rubber seal on sides of hangar doors fixed with self tapping screws, complete all as specified and as directed by Engr-in-charge. Note : (a) The work will be carried out as required on site without damaging the existing structure and necessary arrangement for climbing on the hangar height upto 35m door shall be provided by the Contractor and the same is deemed to be included in the quoted rates. (b) All safety precautions will be taken by the Contractor during execution and the same is deemed to be included in the quoted rates.

Taking down old unserviceable sub main wiring any size/make from existing position all as specified and as directed by Engr-in-charge.

Material & Labour for following submain wiring along with earth wire in and including the suitable size of stove enamelled rigid ERW steel conduit or PVC conduit incl FRLS PVC insulated copper conductor,two run single core cable for phase & Neutral and single run as earth wire in surface/ recessed as required and directed by Engr-in-charge :- Note - Quoted rate is deemed to be included the charges of necessary T&P/Boom lift / Crane, labour etc and MS work complete all as per site requirement. Make of Cable: Plaza/Havells/Polycab.

All as per item no-51 here-in-before but 2X4 Sqmm for phase & Neutral and 1X4.0 Sqmm as earth wire.

All as per item no-51 here-in-before but 2X6.0 Sqmm for phase & Neutral and 1X4.0 Sqmm as earth wire.

All as per item no-51 here-in-before but 2X10.0 Sqmm for phase & Neutral and 1X6 Sqmm as earth wire.

4x 10.0 sqmm and 2x 10.0 sqmm as earth wire

4x 16.0 sqmm and 2x 16.0 sqmm as earth wire

4x 25.0 sqmm and 2x 25.0 sqmm as earth wire

S&F sheet metal enclosure vertical TPN MCCB DB 8 way double door IP30 with spreader terminals,insulating phase barrier and hardware with neccesary arrangements Including taking down old u/s DB, MCCB and MCB's all as specified and directed.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB,Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 10 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB TPN 415 V, 63 To 100 Amps with breaking capacity 10KA, B curve complete Including taking down old unserviceable all as specified and as directed by Engr-in-charge.

Supply and fix for MCB SP 230 V, 5 to 32 Amps with breaking capacity 10KA, B curve complete Including taking down old unserviceable all as specified and as directed by Engr-in-charge.

Material and labour for replacement sheet metal enclosure with earth plug and socket top and MCB SP 20/32 Amps, 240 V, C curve complete all as specified and directed Engineer-in-charge.

Material and labour for replacement of sheet metal enclosure with Triple pole and earth MCB rating upto 32 Amps 415 V, Three phase neutral earth plug and socket top complete all as specified and directed Engineer-in-charge. Make : Legrand/ Siemens/ABB/Scheneider.

Material and labour for replacement of sheet metal enclosure with Triple pole and earth MCB rating 63-100 Amps 415 V, Three phase neutral earth plug and socket top complete all as specified and directed Engineer-in-charge. Make : Legrand/ Siemens/ABB/Scheneider.

Taking down old / unserviceable / burnt LED light fittings / drive/ignator of any type / wattage from existing positions in Hangars at height upto 30 meter including necessary Boom lift / crane etc as per site requirement carefully, checking of fitting, dismantling unserviceable / burnt parts and replacement of parts as per requirement and refixing in the location in hangar as directed complete all as specified and directed by Engr-in-charge. Note - 1) Spare parts as required shall be arranged by the Deptt from Fitting manufacturer's aganist their warranty of fittings with Deptt, However if any replacement of minor burnt wires require , the same shall be included in the rate quoted. (2) Light fitting including High Bay Light, Aviation light, flood light etc.

Supply only crompton LED driver 150 to 250 watt of capacity complete all as specified and as directed by Engr-in-charge Make : Crompton/Surya/Philips/Bajaj

Supply only crompton LED surge protection device upto 250 watt of capacity complete all as specified and as directed by Engr-in-charge Make : Crompton/Surya/Philips/Bajaj

Hiring boom lift suitable for minimum 30 mtr height for servicing, checking for repair / replacement of highbay lighting and other allied items installed at Hangers , including necessary operator,fuel,T&P, safety equipments/tools complete required for safe operation complete all as specified and directed. Note: Each day is minimum of 8 Hrs of working

Supply , fixing and testing of Energy saving, environment friendly & robust Highbay LED not less then 180 Watts IP66 luminaire with high efficacy lght fitting with all connecting neccessary arrangements of nut,bolts,welding works including Taking down old / unserviceable light fittings of any type / wattage from existing positions of Hangar of height upto 30 meter etc all as specified and as directed by Engr-in-charge/GE. Note : Hiring of boom lift is paid seperatly. . Make : Philips/ Havells/ Wipro/ Crompton .

Supply , Fixing and Testing of 150 watts Energy saving LED light fitting , environmental friendly, long life, die-cast aluminium with toughened IP65 flood light,suitable for highlighting architectural facade and general purpose lighting wih neccessary arrangements of nuts,blots,welding works including taking down old / unserviceable Building / Annexes / Hangar security light fittings of any type / wattage from positions from Hangar / Building etc of height up to 30 mtrs etc all as specified and as directed by Engr-in-Charge/GE. Hiring of boom lift is paid seperately. Make: Philips/ Havells/ Crompton.

Taking down old corroded and unserviceable Avaition light fittings of heavy duty dual/twin type light any type and cap from existing positions i.e Towers / Hangars / Buildings / Overhead tanks etc of height up to 30 mtrs and Supply,fixing and Testing LED Twin type Low intensity Aviation light fittings of cap 8W in and including neccessary arrangements of nuts,boltswelding works etc all as specified and as directed by Engr-in-charge/GE Make : Bajaj/ Crompton/ Philips/ Surya .

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V

Material and labour for Earthing complete with using galvanised copper earth plate electrode of size 600mm x 600mm x 6 mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl copper strip 32 x 6 mm including 40 mm dia GI pipe light grade by means of nuts bolts, washers and necessary earth work in any type of soil PCC (1:3:6) type C1 chamber and RCC(1:2:4)type B-1cover and watering pipe 20 mm dia medium grade with funnel complete with mesh , refiling with soil all as specified. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement removal of surplus soil , site clearance etc. (ii) GI earth strip , GI tubing light grade upto 7.5m deemed to be included the rate quoted by the contractor.(iii) Beyond 7.5 M the GI earth strip & GI pipe light grade 40 mm dia shall be measured and paid separetely under the respective item of the schedule (iv) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtained the earthing will be re done by the contractor at no extra cost.

S & F 32 x 6mm copper strip etc complete all as specified and as directed

Material and labour for GI Pipe 40 mm light grade galvanised, with all fitting laid in trenches/wall / floor all as specified and directed.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. Make :- Crompton/ Sudir/Baliga.

Supply and fix Energy saving not less than 45 Watts LED light fitting ,IP65 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Note:- Make:SURYA / Philips/wipro.

Material and labour for point wiring with two single core 1.5 Sqmm (Nominal cross sectional area) size multi stranded copper conductor cable and one single core 1.5 sqmm (nominal area) copper conductor as earth wire connected to common earth duly 1100 volts grade FRLS insulated unsheathed cable in and including stove enamelled steel rigid concealed conduit of 20mm dia including tee bends, elbows etc., for one flame proof concealed conduit wiring light point controlled by one flame proof switch including necessary cutting on wall/ceiling and making good distrubed surface complete all as specified and as directed by Engr-in-charge.

M&L for Maintenance/servicing to Electrically operated sliding door of size upto 20 m height comprising of motor, Gear boxes,chain, Electric control panel, wiring and replacing defective minorparts including cleaning ,greasing of all the moving parts, checking and testing for smmoth functioning of all electical /electronic circuit, motor,gear/mechanical parts etc all as specified and directed. Note:- (i) The Major spares reqd shall be measured and paid under relevant item as supply and fixing. (ii) The quoted rate includes S&F necessary minor spare part/accessories like key, chain pin, lugs required for replacement of unserviceable spares/accessories including welding and machining work of any type.(iii) The quoted rate includes consumables like oil/grease and hardware like bolts and nuts,pins,keys etc.

Material and labour for taking down defective electric motor 2HP-5HP,1/3Ph,415V, 1420RPM, transporting to private work shop dismatling,opening motor, taking out damaged/burnt out winding from single/ three phase motor, cleaning the slots with CTC and rewinding the same with new super enamelled copper winding wire of existing gauge and turns, oiling and greasing, changing minor parts like Cooling fan , fan cover, Stator, Bearings, Motor shaft, Rotor and reassembling and fixing back into position for making motor fully functional and testing for satisfactory running complete all as directed.

Supply and fix Gear box for door motor as per existing specification and size as required at site including taking down old unserviceable one complete all as directed.

Supply and fix roller Chain as per existing specification and length as required at site including taking down old unserviceable one all as directed.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube CAT CROMPTON DIJB12LT8-20 with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton /philips/wipro/Havells.

Supply and fix high efficiency wall mounted LED batten type polycarbonate tube of 9W 2 ft LED and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge . Make : Philips/Crompton/wipro/ Surya.

M&L for cutting chases on brick walls concrete surfaces not exc 10 cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

RD ENTERPRISES (BID ID -3339344)

N SRINIVASAN (BID ID -3342309)

R.P.TRADERS (BID ID -3339510)

S.R.CONSTRUCTION (BID ID -3339495)

RK CONSTRUCTION (BID ID -3339872)

BALA BUILDERS (BID ID -3339966)

C SRINIVASAN (BID ID -3339537)