Supply Laying and Installation of Road Signages and Markings zebra Crossing in ABD area of Prayagraj

Amount

Dismantling of RCC or R.B. work including stacking of dismantled materials within 60m distance as directed by Engineer in charge. (Taking 0.5mx0.5m median for length of 4m)

Supplying and fixing of Stainless-Steel Bollards of 75 mm dia and 1000mm height from base complete in all respect as directed by Engineer In Charge.

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (For zebra crossing -Taking 7 bars of 500mm x 3000mm for 7m road width; For stop line of 200mm thick along road width) Zebra Crossing

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. (For zebra crossing -Taking 7 bars of 500mm x 3000mm for 7m road width; For stop line of 200mm thick along road width) Stop-line

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degree’s to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification.

Providing and erecting 60cm side triangular Mandatory retro-reflectorized sign as per IRC 67 2012 having 4 mm thick Aluminium composite material sheet, face to be fully covered with Class C Type XI (Table 5) Micro Prismatic Grade Sheeting as defined in IRC: 67-2012 having approved massages e.g. letter, numerals, symbols/legend/arrow etc. in Hindi and /or English, to be cut out from durable transparent Overlay Film Electrocutable film as per drawing and Technical Specifications for Road and Bridge works (Fifth Revision).

Providing Kerb ramp along footpath edges having a gradient of 1:10 near zebra crossing

ab infra

m/s mohd aleem

MAYANK CONSTRUCTION

QualityEngineers

Adarsh Electronics and Electricals

GARIMA SALES CORPORATION