REPAIR REPLACEMENT OF DAMAGE PARTS AND PAINTING TO VARIOUS STEEL FURNITURE AT CHANDIPUR AND BALASORE

Amount

CHAIR TUBLAR STEEL W/O ARM: - M&L for carrying out repair and replacement of the following parts of chair tublar steel without arms as shown in drg as directed by Engr-in-Charge. FD-75 (M)

S&F Seat frameafter canning as per 'Godrej' pattern

S&F Back frame after canning as per 'Godrej' pattern

S&F MS Machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers as required

Cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard size complete all as directed by Engineer-in-Charge

S&F MS flat iron 25x3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support all as directed by Engr-in-Charge

After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair tubuler steel w/o arm for painting, then applying one coat of red oxide primer, then after apply one coat of synthetic enamel paint olive green (Make: Berger/Asian) all as per directed by Engr-in-Charge.

S&F of PVC rubber shoes for leg and cap for top

CHAIR TUBLAR STEEL WITH ARM: - M&L for carrying out repair and replacement of the following parts of chair tublar steel with arms as per drg. FD-75 (M)

S&F Arm wooden made out of 1st class hardwood (Teak) painted by black synthetic enamel paint glosy finished as per drg.

S&F Seat frame including canning as per 'Godrej' pattern

S&F Back frame including canning as per 'Godrej' pattern

S&F MS Machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers as required

Cutting the existing damaged portion of conduit pipe and welding by providing 20mm dia conduit pipe 18 gauge (approx 250mm long) bend to standard size complete all as directed by Engineer-in-Charge

S&F MS flat iron 25x3mm, 50mm long for fixing back frame/seat frame by gas welding to steel frame of chair for support all as directed by Engr-in-Charge

After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair tubuler steel with arm for painting, then applying one coat of red oxide primer, then after apply one coat of synthetic enamel paint olive green (Make: Berger/Asian) all as per directed by Engr-in-Charge.

S&F of PVC rubber shoes for leg and cap for top

CHAIR VERANDAH: - M&L for carrying out repair and replacement of the following parts of chair verandah as per drg. FD-256

S&F leg made out of 20 mm dia conduit pipe 16 gauge of size 1250 mm long

S&F stiffner made out of Mild Steel Rod 10 mm dia, 460 mm long

S&F hard rubber shoe best quality as per existing size and shape

After the removing of old paint, rust (by emery paper) and prepaired whole surface of chair varandahview to position shall be painted with two coats of white enamel paint over a coat of primer (Make: Berger/Asian /salimar) all as shown in drg./ directed by Engr-in-Charge.

Removing existing old worn out nylon tape/cane from chair verandah and reweaving the chair with new 04 mm thick oval shape of white colour best quality cane (Make: Shah Premier all as per drg and as directed by the Engr-in-Charge

CHAIR CUM WRITING DESK : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair cum writing desk as per drg & as per the direction of Engr-in-charge. FD/CCE/R&D/BLS/01 & TP

S&F seat frame including canning (shape as per drg) and Godrej pattern made out of 2nd class hardwood 55X20 mm section duly fitted with screw bolt.

S&F all as per item No 4.01 mentioned here-in-above but back fame with canning made out of 2nd class HW 55X20mm section duly fitted with screw bolt

S&F leg made out of 19mm square condiit 16G including cutting welding to required length.

S&F stiffner made out of 19mm square conduit 16G including cutting welding to required length.

S&F tablet of size 300X230X20 mm made out of 2nd class HW.

S&F Piano hinges

S&F Arm

Point welding as required

Applying one coats of 1st quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface complete on existing frame work of computer chair complete all as directed by Engr-in-charge.

CHAIR SCHOOL WITH HAND BOARD : M&L for carrying out repair and replacement of the following parts of chair school with hand board. Removing carefully the existing unserviceable/damaged parts of chair school with hand board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge. FD/E6/MAP/05

Openable (Hinged on RHS) table top to slide on rod for adjustment

18mm thick plywood BWR Gde with 1mm laminated seat board on top openable withteak wood edging of size 300x585mm

One piece PVC back and seat Make : Blowplast/Neelkamal/Suprime

Basket made out of 5mm dia mild steel wire welded to frame of chair

S&F hard rubber shoe best quality as per existing size and shape

M&L Applying one coats of 1st quality synthetic enamel paint (Black of chair school with hand board) as approved over a coat of pink primer (yellow) by spray machine after preparation of surface complete.

DESK SCHOOL CHILD : M&L for carrying out repair and replacement of the following parts of Destk school child . Removing carefully the existing unserviceable/damaged parts of Desk school child and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge. GE/CDP/F/28/99

Top plank with 19mm thick 2nd class HW fixed with 1.5mm sunmica at top of size 450X460

Back plank with 19mm thick 2nd class HW of size 550X230 mm

Leg with 16G MS 25mm square tube ,440mm long.

S&F of stiffner with 16G MS 25 mm squre tube 250mm long

S&F hard rubber shoe best quality as per existing size and shape

Point welding as required.

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow by spray machine after prepairtaion surface to steel frame.

Polishing to plank,seat & back with superior quality french polish to get glossy finish as directed by Engr-in-Charge.

ALMIRAH LARGE STEEL WITH SHELVES: - M&L for carrying out repair and replacement of the following parts of almirah large steel with shelves as per drg. FD-67 (M)/FD-1031

S&F base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F MS rod for locking device 10 mm dia as per required shape & size

S&F shelves made out of 1.00 mm thick MS sheet over all size 485 x 920 mm.

S&F in replacement CP MS handle as per existing pattern and design of Almirah all as directed and specified by GE/Engr-in-Charge.

S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet

S&F key hole cover outer best quality approved by GE

S&F key hole cover inner side made out of 1.00 mm thick MS sheet

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah large steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

ALMIRAH STEEL LARGE GLAGED:M&L for carrying out repair and replacement of the following parts of almirah steel large glazed as per drg. FD-1034 (M)

S&F Brass lock 6 lever with duplicate key suitable for almirah steel large glazed ( Make : Godrej/harision/Link)

S&F handle steel chormium plated for almirha steel large /Medium

S&S MS cleat for shelves made out 1.00 thick PBI sheet fixed screw

S&F MS hinges made out of 1 .00 thick PBI sheet fixed wih screw

S&F Key hole cover outer best quality approved by GE

S&F Key hole cover inner made out of 1.00 mm thick PBI Sheet

S&F shelves made out of 1.25 thick PBI sheet size 920x 485mm

S&F Leg made out of 1.25 thick PBI sheet including welding with body at bottom

S&F Glass pane 3mm thick for door

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

ALMIRAH STEEL MED GLAZED (FD-104 (M)

S&F Brass lock 6 lever with duplicate key suitable for almirah steel Med glazed ( Make : Godrej/harision/Link)

S&F handle steel chormium plated for almirha steel Medium

S&S MS cleat for shelves made out 1.00 thick PBI sheet fixed screw

S&F MS hinges made out of 1 .00 thick PBI sheet fixed wih screw

S&F Key hole cover outer best quality approved by GE

S&F Key hole cover inner made out of 1.00 mm thick PBI Sheet

S&F shelves made out of 1.25 thick PBI sheet size 920x 450mm

S&F Leg made out of 1.25thick PBI sheet including welding with body at bottom

S&F Glass pane 3mm thick for door

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

ALMIRAH MED STEEL WITH SHELVES: - M&L for carrying out repair and replacement of the following parts of almirah small/med steel with shelves as per drg. FD-243/FD-1032

S&F legs base in "U" shape made out of 1.25 mm thick PBI sheet welded with electric welding machine to match with existing.

S&F MS rod for locking device 10 mm dia as per required shape & size

S&F shelves made out of 1.00 mm thick MS sheet over all size 440 x 765 mm.

S&F in replacement CP handle as per existing pattern and design to any type of Almirah all as directed and specified by GE/Engr-in-Charge.

S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified.

S&F MS cleat for shelves made out of 1.00 mm thick MS sheet

S&F key hole cover outer best quality approved by GE

S&F key hole cover innermade out of 1.00 mm thick MS sheet

After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah med steel inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as per drg.

ALMIRAH STEEL LARGE WITH 18 PIGONS HOLE TP

S&F Brass lock 6 lever with duplicate key Make : Godrej/harision/Link)

S&F CP Handle

S&F Leg madoe out of 1mm thick PBI sheet

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

GLASS DOOR ALMIRAH STEEL WITH 4 SHELVES FD/CCE/R&D/BLS/32 &TP

S&F Brass lock 6 lever with duplicate key suitable for almirah steel with 4 shelves ( Make : Godrej/harision/Link)

S&F handle steel chormium plated

S&S MS cleat for shelves made out 1.00 thick PBI sheet fixed screw

S&F MS hinges made out of 1 .00 thick PBI sheet fixed wih screw

S&F Key hole cover outer best quality approved by GE

S&F Key hole cover inner made out of 1.00 mm thick PBI Sheet

S&F shelves made out of 1.25 thick PBI sheet size 920x 450mm

S&F Leg made out of 1.25thick PBI sheet including welding with body at bottom

S&F Glass pane 3mm thick for door

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

CHARPOY GI PIPE WITH 12 MM PLYTOP: - M&L for carrying out repair and replacement of the following parts of charpy GI pipe with 12mm plytop, complete all as specified shown on drg after removing the old broken parts. FD-220

S&F of new 12mm thick commercial plywood 1980x 900mm BWR grade ISI marked (Make: national/kitply/green ply) alongwith MS round headed nut & bolts with whasher 75mm long and all as directed by Engr-in-Charge.

Dismentling and reassembling frame of charpoy GI pipe plytop and providing extra threads and welding sthe joints as required and directed by Engr-in-Charge.

Removing the existing u/s borken long rails of charpoy GI pipe and S&F new long rail made out of GI tubing 32 mm dia 1980 mm long (Medium grade ISI marked) make approved by GE all as specified and shown drg.

Making out short rails from broken long rails obtaian ser items No.3.03 above and fixing to the charpoy GI pipe complete all as specified and shown on drg including removing existing broken/u/s short rails.

Making out legs for charpoy GI pipe from broken GI pipe obtaian ser items No. 3.03 above and fixing to the charpoy GI pipe complete all as specified and shown on drg including removing existing broken/u/s legs.

S&F of new GI check nut of size dia 32mm and 5mm thick ISI marked approved by GE as required size and directed by Engr-in-Charge.

S&F of new GI elbow 3 way of size dia 32mm after dismantling/taking down old GI elbow of ISI marked approved by GE as required size and directed by Engr-in-Charge.

S&F of new MS flat iron stiffner of size 40x5 mm end length 900 mm with a coat of enamel paint black and all as directed by Engr-in-Charge.

S&F wooden plug as per required size and shape

TABLE DINNING OR'S STEEL: - M&L for carrying out repair and replacement of the following parts of table dinning OR's steel all as shown on drg and as directed by Engr-in-Charge. FD-165 (M)

Removing the existing unserviceable damage table top including aluminum sheet from the table and Supply & fix new table top 1900x685mm size of 18mm thick plain particle board (Phenyl bonded) exterior grade with 22 gauge aluminium sheet all as shown on drg and directed by Engr-in-Charge.

S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.

All as per item No. 14.02 here-in-before but for stiffner

S&F of rubber shoe for leg

Preparing of steel surface of table and applying one coat of synthetic enamel paint of required colour all as specified and directed.

TABLE OFFICE CLK STEEL: - M&L for carrying out repair and replacement of the following parts of table office clerk steel as per drg. FD-84 (M)/FD-1004

Supply & fix top of the table made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

Supply & fix drawers of table made out of 1 mm thick MS sheet over all size of drawer 350x430 mm & 410 mm deep duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified..

Supply and fix side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F Drawer lock with duplicate keys make apporved by GE

S&F of leg made out of 25 mm square conduict 16 gauge include cutting welding to requied length of adequeate size of all as shown on drawing and as as specified and directed by Engr-in Charge.

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office clerk steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge.

TABLE OFFICE OFFICERS STEEL: - M&L for carrying out repair and replacement of the following parts of table office officers steel all as shown on drg and as directed by Engr-in-Charge. FD-84 (M)/FD-1003

S&F in replacement of table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F of drawer of table made out of 1 mm thick MS sheet, over all size drawer as per drawings duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of shutters to the box fabricated out of 1mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified..

S&F of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F of side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of pink primer all as shown in drg and as directed and specified.

S&F Drawer lock with duplicate keys make apporved by GE

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger Asian) all as per directed by Engr-in-Charge.

TEAPOY VERADAH : - M&L for carrying out repair and replacement of the following parts of teapoy verandah as per drg. FD-255

Supply & fix MS conduit 12 mm bore as in short runner of Teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken/ unserviceable runner all as shown on drg and as specified and directed

All as per ser item No. 17.01 here in before but long runner.

Supply & fix top of the teapoy verandha made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet white at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer of teapoy verandah after dismantling old damaged/unserviceable top all as shown on drg all as specified and directed by Engr-in-Charge.

S&F of rubber shoe for leg

After the removing of old paint, rust (by emery paper) and prepaired whole surface of teapoy verandah for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint white (Make: Burger Asian) all as per directed by Engr-in-Charge.

RACK SIDE STEEL WITH TRAY 3 SPACES : - M&L for carrying out repair and replacement of the following parts ofRack side sttel with tray 3 spaces for re-assembling with new parts/components as per required size and shape all as shown in drg. FD-97 (M)

S&F of shelves made out of 1.25 mm thick PBI Sheet Size 685 x 255mm

Points welding as required

Applying two coats of 1st quality synthetic enamel pant colour OG/Grey ( Make Asian/Berger/Shalimae) as approved oer a coat of zinc primer yellow extenal and internal by spray machine after preparation of surfaces.

RACK SHOE STEEL : - M&L for carrying out repair and replacement of the following parts of rack shoe steel as per drg. FD/E6/MAP/02 R

Repair to the rack shoe steel and welded wherever required. remove dents & rust of whole rack and making it servicable and applying a coat of on whole surface synthetic enamel black paint (Make: Asian Berger) complete all as per drg where ever required all as diected and specified.

S&F jali shelves made with 3mm dia ms rod welded to frame all as per detail shown in drg and all as directed by Engr-in-charge.

S&F Hard rubber shoe best qulaity as per existing size and shape

RACK ADJUSTABLE STEEL 6 SHELVES/8 SHELVES/9 SHELVES FD-106 (M)

S&F shelves made out of 1.25mm thick PBI sheet of size 305X915 mm

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface .

TABLE EXECUTIVE WITH RETURN UNIT TP

Supply & fix of top size 1825X900 mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F Leg MS square tube 25mm

S&F Drawer made out of prelaminated particle baord size as per drg.

S&F Drawer lock 6 lever with duplicate key as approvede byGE ( Make : Godrej/harision/Link)

S&F Stiffiner MS square tube 25mm

Return unit top size 900 x 450mm made out of 18mm thick prelamianted particles board with sunmica beading all roaund.

Door to cup baord made out of 18mm thick prelaminated particle board and size & shaape as per existing.

S&F Hinges for return unit

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

JR. EXECUTIVE TABLE FD/CCE/R&D/BLS/66

Supply & fix of top size 1675X915 mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.

S&F leg MS square tube 25mm

S&F Drawer made out of 1.25mm thick PBI sheet and size as per dgr.

S&F Drawer lock 6 lever with duplicate key as approvede byGe ( Make : Godrej/harision/Link)

S&F Stiffiner MS square tube 25mm

S&F Door of cup board made out of 1.25mm thick PBI sheet and size as per Drg.

Rubber shoes for leg of the table

Point welding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

FORM WITHOUT BACK : - M&L for carrying out repair and replacement of the following parts of form without back all as shown on drg and as directed by Engr-in-Charge. FD-77 (M)

Removing the existing userviceable broken seat plank and supply & fix new 2nd class hard wood (Bijasal/Hollock) seat plank of size 255x1525mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glosy fensh of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.

S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length as specified and directed by Engr-in-Charge.

All as per item No. 23.02 here-in-before but for stiffner

S&F of rubber shoe for leg

Point welding as required

Preparing of steel surface of form without back and applying one coat of synthetic enamel paint of required colour all as specified and directed.

FORM WITHOUT BACK STEEL - M&L for carrying out repair and replacement of the following parts of form without steel all as shown in drg. and as directed by Engr-in Charge. FD-97 (M)

S&F of PBI sheetimm thick of size 1520 x 305mm for seat as specified and directed by Engr-in-Charge.

S& of frame made out of 25mm MS conduit pipe as per existing size and shape as per Drgs.

Point welding as required

S&F of rubber shoe for leg

Preparing of steel surface of form without bac steel and applying two coat of synthetic enamel paint of required colour all as specified and directed.

STOOL STEEL ( 305X 305X 600MM) FD-81 (M)

S&F Leg ( including welding )

S&F Top of stool of size 305x305x600mm made out of 1.25mm thick PB sheet welding to frame

Point wdlding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

STOOL STEEL ( 305X 305X 760MM) FD-81 (M)

S&F Leg ( including welding )

S&F Top of stool of size 305x305x600mm made out of 1.25mm thick PB sheet to frame

Point wdlding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

STOOL STEEL ( 305X 305X 510MM) FD-81 (M)

S&F Leg ( including welding )

S&F Top of stool of size 305x305x600mm made out of 1.25mm thick PB sheet to frame

Point wedlding as required

Applying two coats of 1st quality synthetic enamel paint colour OG/Black(Make: Asian/Berger/Shalimar) as approved over a coat of zinc primer yellow external and internal by spray machine after prepairtaion surface to steel frame.

Hospital bed with matress: - FD/CCE/R&D/BLS-07

Removing existing old wornout faded out painting and applying two coats of synthetic enamel paint colour OG/Grey/White as approved by Engr-in-Charge /GE over a coat of zinc chrome primer (Yellow) to external & internal surface by spray machine including necessary prepairation of surface denting (applying steel putty where ever necessary) with glossy finish all as directed by Engr-in-Charge/GE

Removing old damaged u/s matress of size 1875x840x100 mm and supply new matress of required size.(make Kurl on/Sleep well /Century) as approved by Engr-in-Charge/GE.

Removing existing old wornout faded out painting from following types of street furniture and applying two coats of synthetic enamel paint colour OG/Grey/White as approved by Engr-in-Charge /GE over a coat of zinc chrome primer (Yellow) to external & internal surface by spray machine including necessary prepairation of surface denting (applying steel putty where ever necessary) with glossy finish all as directed by Engr-in-Charge/GE.

Accessories storage system FD/CCE/R&D/BLS-60

Coach Examination FD-122 (M)

Single faced book stack TP

Double faced book stack with main unit TP

Double faced book stack with add unit TP

Locker steel FD-1029

Ladder for loft FD-238

Trestle store room iron FD-86 (M)

Table folding steel TP

jlenterprise

PREMIER HOOD HOUSE

M/S T.N.CONSTRUCTION

FRIENDS CONSTRUCTION

RPL SYNDICATE CO