REPAIR OF GI CHARPOY 32MM HARD TOP AMD CONVERSION OF CHARPOY GI PIPE 25MM NIWAR INTO HARD TOP INCLUDING POLISHING/PAINTING OF WOODEN/STEEL FURNITURE ITEMS AT BSO FURNITURE YARD UNDER GE SUKNA

Amount

Repair of GI Charpoy Pipe 32 mm with hardtop /plywood top as shown in drawing No. FD-220.

Supply & fixing of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’ complete all as per drawing and directed by Engr in Charge.

Supply & fixing of stiffener of size 40mm x 06mm MS flat iron of 85cm (+/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’) duly spray painted 2 coat over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for dismantling of unserviceable GI long rail of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium grade ISI marked both end threaded and fixed all as shown on drawing complete all as specified and directed

M&L for dismantling of unserviceable GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 1.03 above and all as shown on drawing complete all as specified and directed

M&L for dismantling of unserviceable GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI Long Rail/short rail obtained from item No 1.03 and 1.04 Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl painting two coats of black Japan synthetic enamel paint over one coat of red oxide primer and rest as shown on drg complete all as specified and directed

M&L for dismantling of unserviceable GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing by new GI elbow 3 way of 32 mm dia medium grade with ISI marked shall be provided as shown on drawing complete all as specified and directed

M&L for dismantling of unserviceable GI check nut 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI check nut 32 mm dia 6 mm thick of best quality as shown on drawing complete all as specified and directed

Supply and replacement of Hardwood blocks made out of 1st Class hard wood complete all as specified and directed

Conversion of Charpoy GI Pipe 25 mm Newar to Charpoy GI 25 mm plywood top as shown in drawing No. FD-220.

(i) Removing old, torn Nylon Newar from existing charpoy GI pipe. (ii) Supply of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’. (iii) Supply of 03 (Three) nos of extra stiffener of size 40mmx06mm MS flat iron of 85cm( +/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’). (iv) Fixing of all three M S flat iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6” distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level. (v) Fixing of 7 layer12mm BWR of make mentioned in (ii) plywood to the holes made on the M S flat iron stiffener with 9 counter-sunk flat head scres/locks nuts & bolts as directed by Engr-in-Charge. (vi) Corners of plywood shall be rounded off and suitably holed with rose bit to prevent heads of nuts/bolts from protruding out in case bolts other than flat head are used. All four corners & bottoms of plywood to be chiselled/suitably sheared off to the extent to ensure housing of raised portion of elbow and chuk nuts, to make the plywood seat flat on rails & stiffener evenly throughout. Remaining details all as directed by Engr-in-Charge.

M&L for dismantling of unserviceable GI long rail of 25 mm dia from charpoy GI pipe 25 mm dia, supply and fixing of new GI long rail of 25 mm dia medium grade ISI marked duly both end threaded and fixed all as shown on drawing.

Dismantling of unserviceable GI short rail of 25 mm dia from charpoy GI pipe 25 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 25 mm dia GI long rail obtained from item Sl No 2.02 above and all as shown on drawing.

Dismantling of unserviceable GI leg 25 mm dia from Charpoy GI pipe 25 mm dia, providing by cutting, threading one end and forming of leg from retrieved 25 mm dia GI short rail obtained from item No 2.02 and 2.03. Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl painting two coats of black Japan synthetic enamel paint over one coat of red oxide primer and rest as shown on drawing.

M&L for dismantling of unserviceable GI elbow 3 way of 25 mm dia from charpoy GI pipe 25 mm dia, supply and fixing by new GI elbow 3 way of 25 mm dia medium grade with ISI marked shall be provided and rest as shown on drawing.

M&L for dismantling of unserviceable GI check nut 25 mm dia from charpoy GI pipe 25 mm dia, supply and fixing of new GI check nut 25 mm dia 6 mm thick of best quality as approved by GE and rest as shown on drawing.

Supply and replacement of Gutkha made of 1st class hard wood for legs.

M&L for preparation of old painted surface of steel furniture and applying a coat of synthetic enamelled paint 1st quality of approved colour on steel surface (inside and outside) by spray Gun Machine complete all as specified and as directed by Engr-in-Charge for the following items :-

Almirah small steel ½H ½ S, FD-114 (M),1034

Almirah steel large with shelves, FD-67, 1031

Almirah steel medium with shelves.FD-1032

Book case steel FD-90(M), FD-1028

Book shelf open small steel FD-69 (M)

Book shelves open large steel FD-69 (M)

Locker steel FD-257, FD-1029

Table 900X600X760mm w/drawer steel FD-1008

Table office clerk steel FD-381

Table office officer steel FD-1003, 84

Table typist steel FD-1006

M&L for cleaning of old polishing surface of wooden furniture by caustic soda as required except the surfaces where in plastic, cane, plywood, particle board, plastic laminated sheet used than smoothing by sand paper (No 80) filling gaps/bore holes with wooden, putty past and rubbing the sufaces again with sand paper (No 120) untill the surface is throughly smooth, plolishing same surfaces with best quality of french polish till required shining shade to following furniture all as specified and as directed by Engg-in-charge:-

Table Centre FD-274

Table dressing ladies FD-251, FD-378

Chair Dinning FD-279

Chair Writing FD-280

Chair Easy FD-229

Table Writing FD-33, 275

Table Dining 6/8 person FD-273,239

Bed Hard with Plywood top FD-246

Book Case 'FD-237

Hat Stand with Mirror 'FD-23,206,233

Peg Table 'FD-277,384

Sofa set 5 Seater FD-356,371,281 & SPL TP

Table Bed side 'FD-276 & 248

Side Board 'FD-241,371

Teapoy' FD-34,278,382

Table dressing Gents with mirror 'FD-230, 379

M/S Banerjee construction co

M/S B B CONSTRUCTION

M. K. ENTERPRISES

M/s B. K. Ghosh and Co.

M/S BENGAL ENGINEERING ENTERPRISES

SHRI M K SAHA

GEETA CONSTRUCTION