REPAIR TO PLASTER, GRIT PLASTER, FLOORING, PAINTING IN COMMAN AREA AND OTHER MISC B/R WORKS AT TARAPORE ENCLAVE (RANGPURI) IN THE AREA OF AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls/ concrete surface, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick cement plaster with redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and as directed.

M&L for 10 mm thick cement plaster with redimix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and as directed. Notes for Srl item Nos. 2 & 3 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of new plastered or unplastered surfaces of ceiling and applying three coats of White wash, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over including one coat of birla white putty on whole surface, complete all as specified and directed by Engineer-in-Charge.

Dismentling floors, hearth or wall tiling including cement morter bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

M&L for Virified Ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. laid over and including 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic tiles, light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm not exceeding 0.38, in floors etc. laid over and including 15mm thick cement mortar screed bed of CM (1:6) , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc laid over and including 15mm thick cement screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed Ceramic coloured tiles in vertical surface 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat of cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles of 300x200x7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-Charge.

S&F 20mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs of plastic WC seat cover white/ off white closed pattern with flat bottom end cover and mild steel CP hinging device, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, sink mixer for mixing valve 15mm bore, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, mixer for mixing valve 15mm bore, Hot and Cold CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin , including fittings, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, wall mixer for mixing valve Hot and Cold water Screwed Down for iron pipe 15mm bore CP brass fancy including joints to steel pipe or unions, including fittings for, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitrous china wash hand basin white, ovel type over counter Wash hand basin size 550x 420mm, including necessary waste pipe and coupling, over existing in Granite countern complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, CP health faucet alongwith 1.00 to 1.50 meter SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) , white/ off white, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 litre capacity, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC waste pipe 32mm bore, 65cm long plain/ expandable type with necessary fitting, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, stainless steel grating dome 125 mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, CP waste coupling 32 mm dia suitable for wash hand basin or kitchen sink, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel plate rack overall size 786X760X254mm fixed with steel screws with wooden gutties complete all as specified and directed by Engr-in-Charge. Make:- Prayag Cat No.P-346 or equivalent in CERA, JAYNA as approved GE. Note : The contractor shall procure the stainless steel plate rack directly from the manufacturer or from their authorised dealer and shall produce original purchase voucher alongwith manufacturer guarantee card, while claiming the payment.

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC trap/floor trap with grating including jointin to wasted pipe in run lead, dia of outlet 100mm in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated Stop valve/angle valves fancy type cast copper alloy for 15 mm bore of pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repair angle valve/stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions for 15 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps long body, chromium plated cast copper alloy, fancy screwed both ends for 15 mm bore of pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, PVC connection 15mm bore with brass nut Steel cover length 450 mm for hot water pipe, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, brass spindles with knobs suitable for concealed stop valves/ bib tap/ pillar tap/ hot and cold mixture of 15 mm bore etc. all as per sample, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs HDPE PVC lid (cover) for 300 to 1000 Litres capacity PVC tanks, complete all as specified and directed by Engineer-in-Charge.

S&F in repair toilet paper holder of brass chromium plated fixed to walls with CP brass screws, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches ), area exe 2.00 Sqm but not exceeding 3.00 Sqm, preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces by using sand paper and than applying two coats of oil bound distemper over a coat of primer, including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from internal surfaces of walls or a part thereof (In Patches), area exceeding 3.00 Sqm but not exceeding 4.00 Sqm, preparing and levelling the disturbed surfaces by using wall care putty (JK/Birla white) to obtain even and smooth wall surfaces by using sand paper and than applying two coats of oil bound distemper over a coat of primer,including scaffolding arrangement, trestles, ladders, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for 25 mm bore of iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore brass chromium plated Two Way angle valves fancy type cast copper alloy, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any descreption and in any position including removal of demolished material out of MoD Land complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick cement plaster in sunken portion on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. (WPC will be paid separately).

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm incl. cleaning surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type E2 1:5:10 (40mm graded crushed stone aggregate) in , mass concrete and filling in sunken floor etc complete all as specified and directed by Engineer-in-Charge.

M&L 40 mm thick (average thickness) Cement concrete type B-0,1:2:4 (12.50mm graded aggregate) as in flooring/ roof pedding, finished even and smooth without using extra cement, including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and directed by Engineer-in-Charge. Note : The work may also to be ordered to carried out in patches of area not exc 3 Sqm each as per site requirement and the rate quoted by the tenderer are deemed to be included for the same. No extra claim for work carried out in patches shall be admission on this account.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Material and labour for pre-cast cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb stone (factory made) on road and path etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered surfaces of wall thereafter filling of holes and cracks with birla wall care putty to obtain an even and smooth wall surface and applying one coat of white wash alongwith including scaffolding arrangement, trestles, ladders complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of Cement base paint on walls complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted Steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved shade/tint complete all as specified and directed by Engr-in-Charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of existing defecive/repairable portion complete all as specified. Note :- The rate quoted by the tenderer are deemed to be included for the following provisions. 1. The work are to be carried out over exisitng defective/repairable patches/pannels after taking down including racking out joints hacking for key scrubbing down with water etc. complete. 2. The entire work are to be carried out in G+4 buildings. Necessary 4 leg scafolding and safety precuasion are to be carried out before commencing the work with entire satisfaction of Engr-in-Charge. 3. Demolished mateiral are to be disposed off out side of MoD. 4. The groove shall be measured and paid separately under respective items.

M&L for forming groove of uniform size 15mm size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

Dismantling of water tanks of any type/pattern not exc 250 ltr and removing from site of work, complete all as specified and directed by Engineer-in-Charge.

M&L for rotational moulded polythylene water storage tanks 250 litres capacity (cylindrical vertical/ ractangular with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut complete, screwd for iron pipe or brass ferrule size 20 mm bore complete all as specified and directed by Engineer-in-Charge.

Notes for BoQ:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

M/S.M.S.Devi.Const.Co

verma enterprises

Chaudhary Constructions