Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.7 LAccepted-AOC 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | 1 | Accepted-AOC L1 Bidder | |
| 2 | 2₹24.4 L+₹69,390.22 (2.93%)Rejected-Finance SHOP NO 6 BENGALI CLUB MIDDLE POINT SRI VIJAYA PURAM 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | 2 | Rejected-Finance Not L1 Bidder | |
| 3 | 3₹24.5 L+₹80,754.28 (3.41%)Rejected-Finance 290 NEW PLOT JAWAHAR NAGAR JAMMU JAMMU JAMMU KASHMIR 180005 | JAMMU | JAMMU AND KASHMIR | 180005 | 3 | Rejected-Finance Not L1 Bidder | |
| 4 | 4₹24.9 L+₹1.2 L (5.20%)Rejected-Finance | 4 | Rejected-Finance Not L1 Bidder | |
| 5 | 5₹24.9 L+₹1.3 L (5.33%)Rejected-Finance | 5 | Rejected-Finance Not L1 Bidder |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
14 Aug 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
PROVN OF LIGHTS ALONG RD CONNECTING RP GATE AND OTM ACCN AT SALT LAKE ALONGWITH CERTAIN MINOR WORKS AT 2 CBPO AND SALT LAKE UNDER GE NORTH KOLKATA
2023_MES_609475_1
8276/23-24/GE(N)/KOL/E8 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
CBPO SALT LAKE
AS PER TENDERDOCUMENT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹44,000
Yes
5 Sept 2023
17 Jul 2023
15 Aug 2023
18 Jul 2023
14 Aug 2023
31 Jul 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregates) in surface channels and drains including necessary formwork complete all as specified and directed.
Extra for forming fair finished drain for channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds , mitred/stopped ends etc. complete all as specified and directed.
Add or deduct item no 4 above for each 25mm inner girth or part there of over or under 30cm inner grith in cement concrete using extra cement including forms, moulds etc.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed.
Material and labour for brick work with bricks, class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for precast reinforced cement concrete (1:1.5:3) type A-1 (using 20mm graded stone aggregates) for cover slab set in CM (1:4) as in manhole cover/ drain cover including demolition of existing unserviceable RCC cover slab with MS handle complete all as specified and directed.
Material and labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc. as required complete all as specified and directed.
All as per Item No. 10 above but 6 to 8mm dia TMT bars complete all as specified and directed.
All as per Item No. 10 above but 5mm dia and over upto and including 10mm dia TMT bars in stirrups, spacers and binders complete all as specified and directed.
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Material and labour for rendering 10mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for providing PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping, foundation etc including necessary formwork complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix 2 mm thick Fibre Glass reinforced Translucent corrugated or semi corrugated sheeting conforming to IS: 12866-1989 ( Colour ) with two corrugation side lap fixed with 'L'type or 'J' type or cranked hook bolts and washers in roof , walls etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .complete all as specified and as directed.
Material and labour for framed work as in steel doors of gates of angles or other section with gusset plates, rails, braces, etc. complete, conforming to Fe-410W (Gde-E-250) quality 'B', drilled for fixing of steel sheeting or other covering. Doors etc to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.
Supply and fix rolled mild steel Fe-410-W (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint on new steel surface exceeding 10 cm width or girth over a coat of red oxide primer including preparation of new steel surface complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of cement base paint over a coat of alkali resistant primer including preparation of newly plastered surfaces of walls complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.
Surface excavation not exe 30cm deep and averaging 15cm deep getting out in soft /loose soil complete all as specified and as directed.
Excavation over area n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.
M&L for reinforced cement concrete M-25(design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete M-25(design mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for reinforced cement concrete M-25(design mix) as in columns, pillars, piers,posts and struts etc complete all as specified and directed.
M&L for reinforced cement concrete M-25(design mix) as in slabs supported on walls, beams, columns, in floors, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for reinforced cement concrete M-25(design mix) as in walls, retaining walls, basement walls, ballast walls and the like including attached pilasters and buttresses complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough flat concrete surface complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, lintle cantilever, shelves etc. for rough flat concrete surface complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircases railings and similar work including attached pilasters, buttresses etc, vertical or to batter for rough finished flat surfaces.
Material and Labour for rendering 5mm thick in CM (1:3) as in sides of columns, lintel, beams, chajjas, facia, railings, RCC wardrobe etc including finished even and smooth without using extra cement etc. complete all as specified and directed.
M & L for 20mm thick rendering in cement mortar 1:4 in two layers, 10mm thick in each layer and mixed with water proofing liquid admixture on top layer of external surfaces of brickwork or concrete surfaces including finishing the surfaces fair and even compelete all as specified and directed. (Note : Water proofing liquid admixture shall be measured and paid separately)
Supply only water proofing liquid admixture complete all as specified and directed.
Material and Labour for rendering 5mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement etc. complete all as specified and directed.
Material and Labour for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.
Material and Labour for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for Hardcore of gauge exc. 63 mm but n. exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in flooring laid in bays and finishing the surfac eeven and smooth using extra cement complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/ plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation etc and getting out in soft / loose soil for taking out pipe line complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Cutting hardstanding/ road for laying of cable/ protection pipe not exc. 30 cm wide and not exc. 30 cm depth and making good after laying Pipe/ cable etc with PCC 1:3:6 Type C-2 matching with existing road complete all as specified and directed.
S&F GI pipe 25mm bore, light grade for protection of UG cable, laid in trenches etc complete all as specified and directed.
M&L for sand cushioning with clean dry sand in trenches including watering and consolidation for cable protection complete all as specified and directed. Note : Punned down thickness shall be measured and paid.
Supply and lay sub class 'B' bricks laid dry in trenches for cable protection laid with its longitudinal axis perpendicular to the cable axis complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping of poles/ pipes including necessary formwork complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation of poles / pipes including necessary formwork complete all as specified and directed.
S&F medium grade MS pipe 40mm bore for holding/ fixing of Post top lantern fittings, cable path arrangement etc. and laid in foundation and coping and MS pipe to be 1.20 metre above ground surface including MS clamp, nuts, bolts etc on poles complete all as specified and directed.
Supplying, Laying, connecting, testing and commissioning of XLPE insulated and PVC sheathed, armoured heavy duty UG cable with stranded alluminium conductors 10sqmm x 2 core,1100 Volt grade, laid in trenches/ wall/ floor etc. ,complete all as specified and as directed. (Note :- (i) Pipe and bricks for cable protection, sand cushioning and earth work shall be measured and paid separately)
S&F LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP66 protection including 40 watt LED lamp with all acessories and fixing on MS pipes complete all as specified and directed. (Make Philips Cat No. BGP300 LED40 757 PSU PC IN S1 or equivalent Model of Makes specified in PS here-in-after.
Bharat Udyog
Allied Trading Company
P M BUILDERS
AMR TRADERS
bansal construction
M/s Pooja Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .