Construction of Kala Kendra at Silvassa. (External Development work) (5th call)

Amount

Demolition of Brick work & stone masonary including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) In cement mortar.

Dismentling barbed wire in fencing including making rolls and also including dismentling fencing posts including all earthwork concrete in base and making good the disturbed ground stacking useful materials as directed and disposing of the unserviceable materials with all lead and lift.

Providing M & L,material, Equipment and labour for Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil as directed by engineer-incharge.

Providing M & L material, Equipment and labour for Excavation for foundation for depth from 1.5m to 3.0m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil as directed by engineer-incharge.

Filling available excavated earth (including rock) in trenches, Plinth, sides of foundations etc in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing M&L and filling in plinth with Sand and/or Unscreen Gravel under floors, including watering, ramming, consolidating and dressing complete.

Providing Material, Equipment & Labour for Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials / Earth by mechanical means, including loading, transporting, unloading to approved unicipal dumping ground or as appro

Providing Mixing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing mixing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the Cost of reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts upto floor two level. etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls above floor two level upto floor three level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever upto floor two level, etc complete as directed by engineer-incharge.

Providing and laying TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level etc complete as directed by engineer-incharge.

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete. Extra for Providing formwork with sheathing steel sheets so as to give a fair finish in (A) Foundations, Footings, Bases of Columns etc. and Mass concrete

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

P / M / L for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. Above Plinth upto Floor Two Level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) including curing. Conventional. Etc complete as directed by engineer-incharge.

Providing mixing and laying 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) and finishing with a floating coat of neat cement slurry including curing etc complete as directed by engineer-incharge.

Providing M & L Material, Labour and equipment for 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) with neat cement punning, etc complete as directed by engineer-incharge.

Providing M &L 20mm thick sand faced cement plaster on walls above ground level upto terrace level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) including curing etc complete as directed by engineer-incharge.

Providing material and labour for Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing and Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing and applying Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for Anti skid / Dark shade / Light Shade, etc complete work as directed by engineer-incharge. (Make: Johnson, Kajaria, Somany, Euro, RAK, Nitco, Asian)*

Providing and laying Marbo Grenite tiles 8 to 10 mm thick , in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with with color cement slurry including finised with flush pointing & cleaning the surface, etc complete work as directed by engineer-incharge. (Make: Johnson, Kajaria, Somany, Euro, RAK, Nitco, Asian)*

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab upto 0.50 sqm, etc complete as directed by engineer-in-charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Providing and fixing EZ-7 section door/window frame including welding and fixtures fastening including 3 coats of approved enamel oil paint etc complete.

Providing and fixing standard extruded of aluminium section of size 63.5x38.10x 1.95 mm (of jindal section no 4605 ,@ wt 1.094kg/Rmt with colour powder coated aluminium frame with 5mm thick transparent bronze colour tinted float glass as details etc complete for fix window.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .With float glass panes of 4.0 mm thickness

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Providing and fixing Steel work welded in built up sections/framed work,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings,frames,guard bar,ladder,railings,brackets,gates and similar works. (MAIN ENTRANCE GATES)

Providing and Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint,brushing to give an even shade including cleaning the surface of all dirt ,dust and other foreign matter

Providing M & L for neat cement punning on Plaster wall with finishing etc. complete.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and Boring/Drilling bore well of required dia for casing/strainer pipe,by suitable method prescribed in IS : 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/bore log, including hire and run

Providing,filling, spreading and levelling stone boulders of size range 5cm to 20 cm ,in recharge pit, in the required thickness,for all leads and lifts,all complete as per direction of Engineer-in-charge.

Providing,filling,spreading and levelling gravels of size range 5 mm to 10 mm ,in the recharge pit,over the existing layer of boulders,in required thickness, for all leads & lifts,all complete as per direction of Engineer-in-charge.

Providing,filling,spreading and levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit,in required thickness over gravel layer, for all leads & lifts,all complete as per direction of engineer-in-charge.

supplying assembling lowering and fixing in vertical possition in borewell ERW (Electrical Resistance welded)Fe 410 plain slotted having slot of size 1.6/3.2 mm ) mild steel threaded and socketed / plain bevel ended pipe (Type A ) required dia Conforming to IS : 8110, of reputed and approved make having wall thickness not less anticorrosive bitumestic paint of approved brand manufacture, including higher and labour charges fitting accessories all complete for all depths, as per direction of Engineer in charge 200mm dia nominal size dia

Providing, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as150mm nominal dia

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar

Providing and fixing C.I. double seal heavy duty 560mm dia manhole cover without frame

Providing and supplying ISl mark G. l. plpes wlth Couplings of followlng class and dlameter lncludlng all taxes, insurance, transportauon, frelght charges, ocuol, inspection charges, loading, unloading, conveyance to depanrnental slores, stacklng etc. complete. (lS -1239) (Not for well/tube well column pipe) Lowering, laying and Jointlng G. l. plpes with G. l. specials of following dlameters in proper position, grade and alignment as directed by Engineer-in-charge including conwveyance from stores to site of work, labour, giving hydraulic testing, etc. complete Medium duty 32 mm. dia

Providing and supplying ISl mark G. l. plpes wlth Couplings of followlng class and dlameter lncludlng all taxes, insurance, transportauon, frelght charges, ocuol, inspection charges, loading, unloading, conveyance to depanrnental slores, stacklng etc. complete. (lS -1239) (Not for well/tube well column pipe) Lowering, laying and Jointlng G. l. plpes with G. l. specials of following dlameters in proper position, grade and alignment as directed by Engineer-in-charge including conwveyance from stores to site of work, labour, giving hydraulic testing, etc. complete Medium duty 40 mm. dia

Providing and supplying ISl mark G. l. plpes wlth Couplings of followlng class and dlameter lncludlng all taxes, insurance, transportauon, frelght charges, ocuol, inspection charges, loading, unloading, conveyance to depanrnental slores, stacklng etc. complete. (lS -1239) (Not for well/tube well column pipe) Lowering, laying and Jointlng G. l. plpes with G. l. specials of following dlameters in proper position, grade and alignment as directed by Engineer-in-charge including conwveyance from stores to site of work, labour, giving hydraulic testing, etc. complete Medium duty 100 mm. dia

Providing and supplying ISl mark G. l. plpes wlth Couplings of followlng class and dlameter lncludlng all taxes, insurance, transportauon, frelght charges, ocuol, inspection charges, loading, unloading, conveyance to depanrnental slores, stacklng etc. complete. (lS -1239) (Not for well/tube well column pipe) Lowering, laying and Jointlng G. l. plpes with G. l. specials of following dlameters in proper position, grade and alignment as directed by Engineer-in-charge including conwveyance from stores to site of work, labour, giving hydraulic testing, etc. complete Medium duty 150 mm. dia

Providing material and labour for Ball or stop Valves Flanged ends, Metallic to metallic chrmoe coted wedge PVC seat rings 150 mm. dia

Providing and filling sand of grading zone V or coarser grade allround the G.I. pipes in external work. 32 mm. Diameter pipe

Providing and filling sand of grading zone V or coarser grade allround the G.I. pipes in external work. 40 mm. Diameter pipe

Providing and filling sand of grading zone V or coarser grade allround the G.I. pipes in external work. 100 mm. Diameter pipe

Providing and filling sand of grading zone V or coarser grade allround the G.I. pipes in external work. 150 mm. Diameter pipe

Painting G. I. Pipes & fittings with two coats of anti-corrosive bitumastic paint of approved quality - 32 mm. Diameter pipe

Painting G. I. Pipes & fittings with two coats of anti-corrosive bitumastic paint of approved quality 40 mm. Diameter pipe

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : up to 1.50 m depth Pipes 80 mm to 300 mm diameter

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : up to 1.50 m depth Pipes Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : up to 1.50 m depth Pipes Pipes 80 mm to 300 mm diameter

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : up to 1.50 m depth Pipes Pipes 80 mm to 300 mm diameter

Providing and laying Open timbering in trenches including strutting and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter

Providing and laying Open timbering in trenches including strutting and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter Depth 1.5 to 3.00 meter

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm. dia. RCC Pipes

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm. dia. RCC Pipes

Providing and laying in position cement concrete excluding the cost of centering and shuttering. (in all type of work upto plinth level) by 1:4:8 (1 cement : 4 coarse sand : 8 graded stone agg. 40 mm nominal size)

Providing and laying in position cement concrete excluding the cost of centering and shuttering (in all type of work upto plinth level) by 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) for RCC bedding

Providing material and labour for Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two inlets.

Providing material and labour for Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm depth for Brick masonry chamber.(ii) for 500mm x 700mm size.

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality - M.D.- 10 - Square shape 450 mm internal dimensions.

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W.Pipe

Providing material and labour for Reinforced cement concrete work in walls of (any thickness) with 1:1.5:3 (1 cement : 1.5 coarse sand and 3 gradded stone aggregate of 20 mm nominal size) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm. size P type

Providing & fixing of hand lever / butterfly handle operated uPVC ball valve type garden hydrant valve with PVC hose nippul (Make : Astral / Ajay / Ashirwad / Supreme) - 20 mm nominal bore

Providing & Fixing submersible pump of approved make with suitable capacity motor having 1250 liter per minute discharge and 20 head as per water table including all necessary fitting, electrical control panel with S/D starter, ammeter, voltmeter, single phasing preventor and all motor protection arrangement complete in all respects. (Make : Kirloskar / wilo)

Supply & fixing in position cast iron body double flange dual plate wafer type check valve (NRV) (PN 16) with SS disc, SS stem, EPDM seat, spring & pin, SS stem, SS internal fastening, CS external fastening, including transportation to worksite, supply & fixing complete with testing as per direction of the Engineer - in - charge. (MAKE : Audco / Advance / AIP) 150 NB

Providing material and labour for Earthwork for embankment including breaking clods,dressing with all lead and lift (excluding watering and consolidation( (E) From borrow area within 3.0 Km .lead

Providing material and labour for Rolling of earthwork in layers wit power roller including filling in depressions which occur during the process.

Providing material and labour for Watering of earthwork on whole levelling as directed surface as directed by Engineer in charge.

Providing mixing and laying of graded stone aggregate of following sizes (for W.B.M. Road)(1) Hand broken stone aggregate 90mm to 45mm size stone aggregate

providing M/L of hard murram 50mm to 150mm size.100mm thickness.

Providing M/L of graded stone aggregate of following sizes (for W.B.M. Road)(1) Hand broken stone aggregate 40mm to 63mm size.

Providing and laying controlled cement concrete M.250 and curig complete excluding the cost of formwork and reinforcement for reinforced concrete work in © slabs,landing,shelves,upto floor two level

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar 1:3 (1 cement:3 coarse sand),including making joints with or without grroves(thickness of joints except at sharp curve shall not to more than 5mm),including making drainage opening wherever required complete etc.as per direction of Engineer-in-charge(length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by engineer-in charge).

Providing,laying and making kerb channel 30 cm wide and 50mm thick with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand,including finishing the top smooth etc.complete and as per direction of Engineer-in-charge.

Providing and laying stamp concreting Treatment: sprinkling of color hardener, Floating the surface with different types of floaters, Stamping, cleaning the surface with water and applying acrylic based sealer for finishing with labor, tools & equipments

Providing material and labour for Filling available excavated earth (excluding rock) in trenches.plinth,side of foundations etc.in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering.

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift.(A) Above 200 Meters upto 300 Meters.

Supplying and stcking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reeduced by 8% for payment).

Supplying of screened cleaned pea (rounded) gravel of following sizes)(B) Supplying of unscrened gravel

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of

Providing material and labour for Mixing earth and sludge or manure in the required proportion specified or directed by the officer in charge.

Providing material and labour for Spreading of sludge,dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge,dump manure and/or good earth to be paid separately).

Providing material and labour for Plantation of Tress,Shrubs,and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge Trees Plant

Providing material and labour for Plantation of Tress,Shrubs,and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge Shrubs Plant

Plantation of Tress,Shrubs,and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge Hedge plant

Providing and Displaying Acalypha plant Different colour well developed,fresh and healthy with good foliage,multi branch 30 to 45 cm ht. in 20 cm size of Earthen pot/Plastic pot bushy plant as per direction of officer-in-charge.

Providing and displaying Cyprus golden plant well shaped developed with good colored foliage fresh & healthy 150 to 165 cm ht in 30 cm Earthen Pot as per direction of the officer -in-charge.

Supply and stacking of plant Cassia biflora of height 90-105 cm.,well branched,bushy in big size HDPE bag as per directtion of officer-in-charge.

Supplying and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos. as per direction of the officer-in-charge. Sunflower Dwarf

Supply and Stacking of Bottle palm plant of height 270-300 cm bottom girth 40-50b cm well developed in big HDPE bags as per direction of the officer-in-charge.

Providing and fixing M.S. tree guard 50 cm squar in plan ,height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of four nos angle iron of size 25x25x5 mm 1.9 m long ,one at each corner and 8 Nos. flat iron of size 25x5 mm 1.4 m long. The vertical members shall be welded to 4 nos 25x6mm M.S. flats placed horizontally around the vertical member of the cage. One name plate of 1mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name.The Tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground,including refilling the earth,compaction etc., complete.The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer,complete in all respect.

Providing and laying chequered terrazo tiles 22mm thick with marble chips of sizes upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse sand) or C.M. 1:6 (1 -cement :6 - coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete. (A) Light shades using white cement

Providing and fixing grass carpet in amphitheatre sitting and stage area all complete with 35-40 mm thickness of approved design and shade as pr direction of engineer-in-charge.

Providing and applying White color Micro topping Flooring including Repairing the surface off any pot holes or cracked floor, Grinding the surface to make it smooth & good to receive the primer, Cleaning the surface off loose particles, Applying primer on the surface & providing layer of Self Levelling micro concrete to a thickness of 3mm to 5mm with White finish all complete as per direction of engineer in charge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (B) Walls, from top of foundation level upto floor two level

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls above floor two level upto floor three level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls above floor three level upto floor four level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls above floor four level upto floor five level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding the cost of reinforcement for reinforced concrete work in Walls above floor five level upto floor six level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in (C) Slabs, landing, shelves and Cantilever above floor five level upto floor six level, etc complete as directed by engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever upto floor two level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor two level upto floor three level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor three level upto floor four level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor four level upto floor five level etc complete as directed by Engineer-incharge.

Providing and laying controlled cement concrete M.200 and curing complete including the cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintels, Beams, Girders and Cantilever above floor five level upto floor six level etc complete as directed by Engineer-incharge.

Providing Material and Labour for fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete up for upto floor two level

Providing Material and Labour for fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete Above floor two to three level

Providing Material and Labour fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete Above floor three to four level

Providing Material and Labour fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete Above floor Four to five level

Providing Material and Labour fixing TMT FE - 500D (Ductile) steel bars reinforcement for rcc work confirming to IS 1789-2008 and of tested quality of TATA, SAIL, JINDAL, ELECTOTHERM or equivalent make including bending, binding and placing in position as per the drawing and instruction of Engineer-in-charge etc complete Above floor Five to six level

Providing and fixing Ai NOVA Lighting - NL-883A-2- 1201PLED-WW Nova Make- 2X12WLED wall/ Column mounted UP-DOWN light Luminaire- EXTRUDED ALUMINIUM BODY- Cast aluminium Closure Cap- heat resistant toughened clear glass diffuser- endless silicone gasket - heavy duty heat sink for thermal stability - integral constant current driver- MCPCB mounted power LED precisely defined optics. Complete in all respects. Color Temp-3000K. Etc. complete

Providing and fixing Ai NOVA Lighting NL-883-C-30WCOB LED Nova Make-COB LED Surface Ceiling mounted Down Lighter Luminaire - Aluminium heavy duty body-Toughned Glass Diffuser-Including inbuilt Driver-Complete in all respects.Color Temp-3000K.