Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹33.0 L+₹3.1 L (10.3%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹33.0 L+₹3.1 L (10.4%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹33.2 L+₹3.3 L (11.2%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹33.4 L+₹3.5 L (11.7%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | Vijay Construction and Company L2 | M/s Akshay Contruction L4 | K.K.Enterprises L12 | Sai Construction L7 | Parhar Enterprise L6 | Suma Construction L5 | N AND G CONSTRUCTION L8 | ANIL CONSTRUCTION CO. L10 | DURGA CONSTRUCTION & TRANSPORT L3 | A.S.ENTERPRISES L1 | SHREESAMARTH CONSTRUCTION L11 | AJINKYA VIKRAM GAIKWAD L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and as directed. | 20 | Sqm | 20 ₹400 | 10 ₹200 | 25 ₹500 | 9 ₹180 | 20 ₹400 | 10 ₹200 | 20 ₹400 | 22 ₹440 | 20 ₹400 | 7 ₹140 Lowest | 18 ₹360 | 20 ₹400 |
| 2.00 | M&L for Eaves/ weather boarding,clean sawn,plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and fixed with self drilling and tapping screws; including preparation of new or previously untreated surfaces over pink primer and two coat synthetic enamel paint complete all as specified and as directed. | 20 | Sqm | 1,200 ₹24,000 | 900 ₹18,000 | 1,800 ₹36,000 | 1,080 ₹21,600 | 1,050 ₹21,000 | 1,500 ₹30,000 | 1,300 ₹26,000 | 975 ₹19,500 | 200 ₹4,000 Lowest | 850 ₹17,000 | 360 ₹7,200 | 1,200 ₹24,000 |
| 3.00 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. | 6.5 | Cum | 300 ₹1,950 | 100 ₹650 Lowest | 500 ₹3,250 | 360 ₹2,340 | 160 ₹1,040 | 150 ₹975 | 400 ₹2,600 | 175 ₹1,137.5 | 120 ₹780 | 160 ₹1,040 | 450 ₹2,925 | 450 ₹2,925 |
| 4.00 | M&L for brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. | 6.5 | Cum | 5,500 ₹35,750 | 4,200 ₹27,300 Lowest | 5,500 ₹35,750 | 5,400 ₹35,100 | 5,000 ₹32,500 | 7,000 ₹45,500 | 5,600 ₹36,400 | 5,375 ₹34,937.5 | 4,300 ₹27,950 | 4,500 ₹29,250 | 4,500 ₹29,250 | 5,200 ₹33,800 |
| 5.00 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed | 74 | Sqm | 350 ₹25,900 | 250 ₹18,500 | 300 ₹22,200 | 360 ₹26,640 | 275 ₹20,350 | 250 ₹18,500 | 280 ₹20,720 | 475 ₹35,150 | 190 ₹14,060 Lowest | 230 ₹17,020 | 270 ₹19,980 | 350 ₹25,900 |
| 6.00 | Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of OBD white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and as dircted by Engr-in -Charge. | 1,200 | Sqm | 80 ₹96,000 | 65 ₹78,000 | 120 ₹1,44,000 | 45 ₹54,000 | 72 ₹86,400 | 90 ₹1,08,000 | 40 ₹48,000 Lowest | 75 ₹90,000 | 45 ₹54,000 | 65 ₹78,000 | 45 ₹54,000 | 100 ₹1,20,000 |
| 7.00 | M&L for 20mm thick cement plaster in two layers ( first layer 10 mm thick dubbing coat in CM 1:6 and second layer 10 mm thick in CM 1:6 finishing the surfaces even and smooth without using extra cement ) on bricks or concrete surfaces , including taking down existing plaster with two coats of OBD of any tint over one a coat of primer and one coat of wall care putty 2 to 3 mm thick on new surface complete all as specified and as directed | 1,400 | Sqm | 330 ₹4,62,000 | 380 ₹5,32,000 | 450 ₹6,30,000 | 405 ₹5,67,000 | 360 ₹5,04,000 | 400 ₹5,60,000 | 320 ₹4,48,000 | 455 ₹6,37,000 | 300 ₹4,20,000 | 280 ₹3,92,000 | 351 ₹4,91,400 | 200 ₹2,80,000 Lowest |
| 8.00 | M&L for complete removal of existing finish/treatment on walls, preparing surface and make surface free from loose particles, oil stains etc and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed. | 460 | Sqm | 98 ₹45,080 | 85 ₹39,100 | 100 ₹46,000 | 81 ₹37,260 | 110 ₹50,600 | 115 ₹52,900 | 60 ₹27,600 | 135 ₹62,100 | 20 ₹9,200 Lowest | 65 ₹29,900 | 63 ₹28,980 | 90 ₹41,400 |
| 9.00 | M&L for mirror polishing on kota stone work where ever required to give high gloss finish complete including treating the surface with beeswax polish complete all as specified and as directed | 550 | Sqm | 180 ₹99,000 | 200 ₹1,10,000 | 200 ₹1,10,000 | 135 ₹74,250 | 100 ₹55,000 Lowest | 200 ₹1,10,000 | 180 ₹99,000 | 275 ₹1,51,250 | 210 ₹1,15,500 | 160 ₹88,000 | 360 ₹1,98,000 | 160 ₹88,000 |
| 10.00 | M&L for Preparation of old wooden surface and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. | 120 | Sqm | 75 ₹9,000 | 35 ₹4,200 | 100 ₹12,000 | 36 ₹4,320 | 40 ₹4,800 | 60 ₹7,200 | 60 ₹7,200 | 38 ₹4,560 | 30 ₹3,600 | 35 ₹4,200 | 27 ₹3,240 Lowest | 75 ₹9,000 |
Tender Value
₹46.5 L
EMD Value
₹93,100
Closing Date
28 Jan 2025, 6:00 pmClosed
GE NORTH PUNE
Garrison Engineers Office (North) General Cariappa Marg, Pune-01
GE (N) P/TOKEN- 39 OF 2024-2025 SPL REPAIR TO BLDG NO. 5 AND 17 ( SINGLE LIVING OR ACCN) OF SCSR PROVN OF INTERLOCKING TILES IN THE PARKING AREA OF HQ DMGSA OFFICER MESS UNDER GE (NORTH) PUNE
2025_MES_692557_1
GE (N) P/TOKEN- 39 OF 2024-2025
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹93,100
Yes
28 Aug 2025
9 Jan 2025
3 Feb 2025
9 Jan 2025
28 Jan 2025
23 Jan 2025
10 Jan 2025 - 14 Jan 2025
Amount
Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and as directed.
M&L for Eaves/ weather boarding,clean sawn,plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and fixed with self drilling and tapping screws; including preparation of new or previously untreated surfaces over pink primer and two coat synthetic enamel paint complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brickwork with fly ash bricks, old size straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.
M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface complete all as specified and as directed
Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of OBD white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and as dircted by Engr-in -Charge.
M&L for 20mm thick cement plaster in two layers ( first layer 10 mm thick dubbing coat in CM 1:6 and second layer 10 mm thick in CM 1:6 finishing the surfaces even and smooth without using extra cement ) on bricks or concrete surfaces , including taking down existing plaster with two coats of OBD of any tint over one a coat of primer and one coat of wall care putty 2 to 3 mm thick on new surface complete all as specified and as directed
M&L for complete removal of existing finish/treatment on walls, preparing surface and make surface free from loose particles, oil stains etc and applying two coat of 100 % weather proof acrylic exterior emulsion paint over one coat of primer complete all as specified and as directed.
M&L for mirror polishing on kota stone work where ever required to give high gloss finish complete including treating the surface with beeswax polish complete all as specified and as directed
M&L for Preparation of old wooden surface and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and as directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed
M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed
M&L for coloured Non skid ceramic tiles 7 to 8 mm thick(square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm as floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:4) and demolition of existing tiles complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 300 x 450x 7 mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM 1:3 and demolition of existing tiles , complete all as specified & as directed.
S&F in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed
All as per Srl item No 17 here-in-before, but fixing only
S&F in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed
All as per Srl item No 19 here-in-before, but fixing only
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all complete all as specified and as directed
S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and as directed
S&F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws,complete all as specified and as directed
S&F in repair Brass Chromium plated towel rail complete all as specified and as directed
S&F in repair Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and as directed
S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed
S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified and as directed
S&F in repair Pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed
S&F in repair 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed
S&F in repair 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and as directed.
S&F in repair 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F in repair PVC (SWR) bends of any radius of 75mm dia complete all as specified and as directed
Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and as directed
All as per srl item No.36 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and as directed
S&F for aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5 x 52 x1.5mm thick ,blades set, with provision of exhaust fan using aluminium sections heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and as directed
S&F for 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and as directed
S&F for Factory made 100 % solid wood plastic composite(WPC) door frame, double rivet 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and as directed NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F for Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement complete all as specified and as directed
S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete all as specified and as directed all as specified,including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and as directed.
S&F for second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed
S&F for factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and as directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed
S&F in repair Stainless steel butt hinges medium weight 100mm complete all as specified and as directed NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed
S&F in repairs Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed
Dismantling 1000 litres capacity PVC water tanks complete all as specified and as directed
M&L HDPE rotational molded polyethylene water storage tank of 1000 liters capacity ,ISI marked, (cylindrical, vertical with closed top) hosted and fixed ,with and including float valve 20mm, ball brass valve, high pressure with polythene float and fly nut hoisted and fixed in position all as specified in SSR Part-I.
S&F Vitreous china squatting pan Orissa pattern wash down water closet white of size 580x440 mm, with integral foot rests complete with P or S trap, PVC flushing cistern high level 10 liters capacity , valve less, symphonic action type complete with inlet ball valve, float and handle including brackets for flush tank, 32mm dia PVC flush pipe, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, including concrete bedding etc. complete all as specified and as directed
S&F in repair Vitreous China wash down water closet pan (Pedestal pattern), white (ETWC) with ‘P’ or ‘S’ trap, white including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe,10 litres capacity PVC flushing cistern low level , valve less, symphonic action type complete with inlet ball valve, float and handle with brackets and plastic water closet seat cover, white, closed pattern with recessed bottom cover and mild steel chromium plated hinge complete all as specified and as directed
S&F in repair Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed
S&F in repir wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed.
S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge.
S&F in repair Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed
Taking out old unserviceable wire net of any description from metal frame i.e. steel windows, ventilators, verandah frame by taking out old flat iron flats and removing the same from site and S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average with of aperture 1.40mm fixed with and including flat iron fillets 12mm & 3mm size, with nut & bolts complete all as specified and as directed
S&F in repair door stopper of stainless steel body and 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.
S&F in repair 20 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed (Minimum weight 210gms)
S&F in repair 15 mm bore float valve of high pressure PTMT with epoxy coated aluminuim rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed . (Minimum weight 142gms)
S&F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
S&F in repair stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and as directed.
S&F in repair 100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed
Dismantling timber scantlings 40 Sqcm and over in section in unframed work in any position complete all as specified and as directed
M&L for 2nd class hard wood, clean sawn, in scantlings timber fixed unframed work complete all as specified and as directed.
All as per serial item No. 69 here-in-before but except timber complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed.
M&L for broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed
M&L for PCC 1:4:8, type D-2 (40mm graded agg) as in foundations,filling and mass concrete complete all as specified and as directed.
M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including filling the joints with sand incl dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in brick/stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
Description all as per 76 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.
Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts or above with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Halonix cat no. HLSLD-09H-24-CWL-R, Havells LHETAXU7PA6S015, Jaquar LPCRSRT25WLC .
Taking down fan, Sealing cable end, dismantling blades and removing fan and blades from site and fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed.
Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.
S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.
S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F PVC rigid non-metallic flexible conduit ISI marked of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
S & F PVC rigid non-metallic flexible conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Vijay Construction and Company (BID ID -3224449)
DURGA CONSTRUCTION & TRANSPORT (BID ID -3226142)
M/s Akshay Contruction (BID ID -3225276)
Suma Construction (BID ID -3225737)
Parhar Enterprise (BID ID -3225546)
Sai Construction (BID ID -3225505)
N AND G CONSTRUCTION (BID ID -3225768)
AJINKYA VIKRAM GAIKWAD (BID ID -3223370)
ANIL CONSTRUCTION CO. (BID ID -3225812)
SHREESAMARTH CONSTRUCTION (BID ID -3225821)
K.K.Enterprises (BID ID -3225490)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .