REPAIR OF ROOF, SUNKEN FLOOR, FALSE CEILING, RAIN WATER PIPE AND OTHER CONNECTED WORKS OF UNRESTRICTED AREA OF COD UNDER AGE B/R-II OF GE (E) JABALPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises. Complete all as specified and directed.

M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles. Complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:6 cement mortar. Complete all as specified and directed.

M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:6 cement mortar. Complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement). Complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement). Complete all as specified and directed .

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coat of white wash on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coat of cement based paint over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash on prepared ceiling surface.Complete all as specified and directed.

M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces. Complete all as specified and directed .

M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for complete removal of existing treatment on brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces. Complete all as specified and directed .

M&L for applying two coat of oil bound distemper on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of white wash on brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of cement based paint on brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of old painted brick work or concrete surfaces & applying one coat of oil bound distemper on brick work or concrete surfaces. Complete all as specified and directed.

M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces. Complete all as specified and directed.

M&L for preparation of old painted Wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (ordinary tint). Complete all as specified and directed.

M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint). Complete all as specified and directed.

Taking down of old existing water proofing treatment on roof surface (Horizontal & Vertical surfaces), including properly cleaning & drying the concrete surfaces. Complete all as specified and directed.

M&L for Water Proofing Treatment on "Non Approachable/Non Accessible and Approachable Roof" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer. Complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces. Complete all as specified and directed.

M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm Complete all as specified and directed..

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces Complete all as specified and directed..

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction. Complete all as specified and directed.

M&L for preparation of new or previously untreated APP based polymeric membrane surfaces & applying two coats of bituminous based Aluminium Paint. Complete all as specified and directed.

M&L for Cement concrete tiles 20 cm x 20 cm x 20 mm thick, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished with grey cement & no pigment over & including 15 mm thick screed bed or bedding layer of 1:4 cement mortar for laying floor finishes. Complete all as specified and directed.

M&L for providing Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, roof padding, sunken slab, benching, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work. Complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all specified and directed.

M&L for Removing surplus demolished material to a distance exceeding 250 m but not exceeding 500 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified and directed.

M&L for Cleaning the concerned Reinforced Cement Concrete surface by means of wire brush to expose the concrete surface, which should be free from all loose particles, dust, laitance, etc. Complete all as specified and directed.

M&L for making corner fillets with Polymer Modified Cementitious (PMC) Mortar (PMC: C:M : 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with Polymer Modified Cementitious (PMC) Mortar. complete all as specified and directed.

M&L for the joints of pipes and concrete or masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :1:2 by weight) and the same is semi-rounded upto 5 mm above surface level all along the periphery of PVC or CI pipes. Complete all as specified and directed.

M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the Reinforced Cement Concrete slab surface and carried upto finished floor level on vertical portion (walls). Complete all as specified and directed. Note : This coat is allowed to get dry for 4-6 hours.

M&L for application of one coat of Acrylic Polymer Modified Cementitious topping rendering (APMC:C:M :: 1:2:2) 1-1.5 mm thick over the first coat of Acrylic Polymer Modified Cementitious (APMC) slurry coating. Complete all as specified and directed. (Note : This coat is cured for 48 hours).

M&L for rendering 15 mm thick in one layer in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) mixed with liquid water proofing compound (water proofing compound to be measured & paid separately as supply only). Complete all as specified and directed.

Supply only liquid water proofing compound ISI marked. Complete all as specified and as directed.

M&L for Cement Concrete Type C-2, 1:3:6 (using 40 mm graded brick coarse aggregate) in sunken floors, filling & mass concrete. Complete all as specified and directed.

M&L for 100 mm thick, Cement Concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as sub base of floor. Complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store. Complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store. Complete all as specified and directed.

S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms). Complete all as specified and directed.

S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms). Complete all as specified and directed.

S&F in repair ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms). Complete all as specified and directed.

S&F in repair ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 455 gms). Complete all as specified and directed.

S&F in repair PVC Tank cover for Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 or 1000 litre capacity fixed in position with nuts and bolt. Complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 15 mm bore dia of pipe. Complete all as specified and directed.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe. Complete all as specified and directed.

Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store. Complete all as specified and directed.

Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store. Complete all as specified and directed.

S&F 15 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors. Complete all as specified and directed.

S&F 20 mm bore GI tubes, 'medium grade' galvanised, with all fittings fixed complete to walls & ceilings or laid in floors. Complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 15 mm bore of pipe. Complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) of 20 mm bore of pipe. Complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 250 ltr & not exc 500 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc., from RCC/PVC tanks exc 500 ltr & not exc 1000 ltr capacity & from mouths of circulating pipes, etc. including washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder & writing date of cleaning with any type of paint including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. complete all as specified and directed.

S&F in repair 15 mm bore, Fancy type, Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Complete all as specified and directed.

Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles. Complete all as specified and directed.

Taking down bib tap/wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size. Complete all as specified and directed.

S&F in repair, Brass chromium plated Wall Mixer 3-in-1 System with provision for both Hand Shower & Overhead Shower complete with 115 mm long bend pipe, connecting legs & wall flanges (without Hand & Over Head Shower) for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-281KN or equivalent.

S&F in repair, Brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-319KNB or equivalent..

S&F in repair, Brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-319KN or equivalent..

S&F in repair, Chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-059KN or equivalent..

S&F in repair, Chromium plated Two-way Bib Cock for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-041KN or equivalent.

S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Complete all as specified and directed.

S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed. Complete all as specified and directed.

S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed. Complete all as specified and directed.

S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc. Complete all as specified and directed.

S&F in repair, 32 mm bore dia of discharge pipe, waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45 gms) etc. Complete all as specified and directed.

S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all as specified and directed.

S&F in repair, Chromium Plated Grating, 100 mm dia with waste hole fixed on floor trap, nahani trap etc. Complete all as specified and directed.

S&F in repair, Toilet Seat/Commode Jet Spray (Regular Type) (1.50 meter) Stainless Steel Grade 304 (Built-in Installation Type) for 15 mm dia of bore of pipe. Complete all as specified and directed.

S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete in all respect as specified.

S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling. Complete all as specified and directed.

S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe. Complete all as specified and directed.

S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device. Complete all as specified and directed.

S&F in repair, Vitreous China squatting pan, ‘Orissa’ Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) etc. Complete all as specified and directed.

S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm. Complete all as specified and directed.

S&F in repair, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm. Complete all as specified and directed.

S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws. Complete all as specified and directed.

S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. Complete all as specified and directed.

S&F in repair, internal fitting for 10 ltrs capacity PVC valveless, syphonic action type flushing cistern. Complete all as specified and directed.

S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern. Complete all as specified and directed.

S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union. Complete all as specified and directed.

S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm. Complete all as specified and directed.

S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc. Complete all as specified and directed.

S&F in repair, 75 mm diameter of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement. Complete all as specified and directed

S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw. Complete all as specified and directed. Make-Jaquar Cat Part No.ACN-1311N or equivalent.

S&F in repair, Corner Glass Shelf with brackets. Complete all as specified and directed. Make-Jaquar Cat Part No.ACN-1173 or equivalent.

S&F in repair, Stainless Steel Double Coat Hook. Complete all as specified and directed. Make-Jaquar Cat Part No.AQN-7761 or equivalent.

S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. Complete all as specified and directed.

S&F in repair, Toilet paper holder with flat recessed type stainless steel. Complete all as specified & directed.

S&F in repair, Single Door PVC Cabinet Mirror of size 350 mm x 450 mm with internal shelves. Complete all as specified and directed.

S&F in repair, Stainless Steel Towel Ring Round. Complete all as specified and directed. Make-Jaquar Cat Part No.AQN-7721 or equivalent.

S&F in repair, Stainless Steel Towel Rack 600 mm long with lower hangers. Complete all as specified and directed. Make-Jaquar Cat Part No.AKP-35781PS or equivalent.

S&F in repair, Europian WC, Single Piece, Vitreous China with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories, Size: 360 mm x 655 mm x 765 mm, P Trap-180 mm. Complete all as specified and directed. Make-Jaquar Cat Part No.LYS-WHT-38851P180UFSM or equivalent.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets. Complete all as specified and directed.

S&F 12 mm thick plain/designer Gypsum Board False Ceiling with GI Frame work including all necessary drilling, cutting to fix electric items. Complete all as specified and directed with following :- (a) GI Grid Channel 30 mm x 25 mm x 20 mm of guage fixed with rawl plug & screw 450 mm centre to centre along with perimeter walls. (b) GI Channel made to shape 50 mm x 40 mm x 40 mm of 24 guage placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI Intermediate runners of size 45 mm x 10 mm x 10 mm of 24 guage fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide & 20 mm guage suspended fixed with steel fastners to roof ceiling @ 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP & finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

S&F G.I. powder coated snap grid frame work for false ceiling to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia G.I. hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of G.I. flat 40 mm x 3 mm, 60 mm long & expansion hold fasteners 12.5 mm dia, 40 mm long & 4 mm thick Non asbestos fibre board (E-board or V-board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws.Complete all as specified and directed.

Taking down Rain Water Pipe of any size or pattern including all fittings. Complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.

S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius. Complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed.

S&F in repair, 110 mm bore PVC (SWR) vent cowl. Complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed.

S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius. Complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal. Complete all as specified and directed.

S&F in repair, 75 mm bore PVC (SWR) vent cowl. Complete all as specified and directed.

S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe. Complete all as specified and directed.

S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe. Complete all as specified and directed.

S&F in repair, Hand Shower 120 mm Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position. Complete all as specified and directed. Make-Jaquar Cat Part No.HSH-1731 or equivalent.

Supplying & Laying of 20 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors. Complete all as specified and directed.

Supplying & Laying of 25 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors. Complete all as specified and directed.

S&F in repair, 15 mm dia of bore, Bib tap standard of PTMT any colour high pressure screwed, for iron pipe & fixed. (Minimum Weight 15 mm - 90 gms). Complete all as specified and directed.

S&F in repair, 15 mm dia of bore, Pillar taps of PTMT any colour high pressure screwed, for iron pipe & fixed. (Minimum Weight 15 mm - 110 gms). Complete all as specified and directed.

S&F in repair, 15 mm dia of bore, Stop Valve of PTMT any colour high pressure screwed, for iron pipe & fixed. (Minimum Weight 15 mm - 90 gms). Complete all as specified and directed.

Schedule of credit amount of Rs. 95,904.75 to be deducted during AOC.

M/S N K SONKAR (BID ID -3132333)

R R VISHWAKARMA CONSTRUCTION CO (BID ID -3120836)

HAFEEZ CONSTRUCTION (BID ID -3124024)

M/S BHATIA CONSTRUCTIONS (BID ID -3132854)

M/S Anil Enterprises (BID ID -3124227)

M/s Brij Constructions (BID ID -3124332)