AMC Fire Hydrant systm

Amount

Please note that Quoted rates are inclusive of taxes,labor, transportation, royalties etc. Nothing Extra shall be paid separtely.

Part-A : Preventive maintenance and servicing of system.Annual comprehensive maintenance contract for following fire hydrant system ( Check list on monthly basis as per details given in Annexure A volume II Page no 114-126 ) Please quoate rates per annum for AMC item in Part A except B check item. B check will be done once in year , please quote rate for B check once in year.

B Check of 100 HP fire engine ( make Greves cotton Ltd ) as per annexure A. B check will be done once in year.

B Check of 85 HP fire engine ( make Kirloskar Ltd ) as per annexure A. B check will be done once in year.

Servicing of 100 HP fire engine ( make Greves cotton Ltd ) as per annexure A

Servicing of 85 HP fire engine ( make Kirloskar Ltd ) as per annexure A

Servicing of 100 HP Main Fire pump ( make Crompton Greves Ltd ) as per annexure A

Servicing of 100 HP Main fire pump ( make Kirloskar ) as per annexure A

Servicing of 20 HP Jockey pump ( make Crompton Greves ) as per annexure A

Servicing of 10 HP Jockey engine ( make Kirloskar ) as per annexure A

Servicing of 15 HP Booster pump ( make Kirloskar ) as per annexure A

Servicing of 10 HP Booster pump ( make Mather & Platt Pumps Ltd ) as per annexure A

Servicing of External Hydrant post valve , size 63 mm, as per annexure A

Servicing of Internal Hydrant post valve , size 63 mm, as per annexure A

Servicing of Fire Hose Reel Size 25 mm with drum ( 30 mtrs ) as per annexure A

Servicing of External Fire Hose Pipe Size 63 mm ( 15 mtrs ) with box as per attached annexure A

Servicing of Internal Fire Hose Pipe Size 63 mm ( 15 mtrs ) with try as per attached annexure A

Inspection and Minor Repair of Fire Sprinkler as per annexure A

Servicing of 4 way Size 63 mm as per annexure A

Part-B : Below item will be executed as per site requirement only. Payment will be done as per actual measurement. Quoted basic rates are inclusive of GST,labour,royalties,transpotation etc. Nothing extra shall be paid separtely.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Rate to include all royalties, taking statutory approvals as necessary to carry out the works etc., complete : - Excavation in ordinary rock

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Rate to include all royalties, taking statutory approvals as necessary to carry out the works etc., complete : - Hard rock (blasting prohibited)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing welding by Welding machine on existing 'C' class heavy duty MS pipe in ground including anticorrosive treatment with coaltar/asphalt tape as per IS 10221, pressure testing for water leakges as per FFS standard. Work includes labour, welders, transport of plant, consumable items, finishing and testing. Work shall be considered as completed on successful testing of joints. Pipe dia Upto 150 mm. One job includes round welding of pipe, coating of anticorrosive with coalter / asphalt tape of 1 sqm size. Work shall be completed as per direction of Engineer in charge.

Providing welding by Welding machine on existing 'C' class heavy duty MS pipe on surface including painting, pressure testing for water leakges as per FFS standard. Work includes labour, welders, transport of machine, consumable items, finishing and testing. Work shall be considered as completed on successful testing of joints. Pipe dia Upto 150 mm. One job includes round welding of pipe as per legnth of welding and paining of 1 sqm. Work shall be completed as per direction of Engineer in charge.

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Size:30m

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with Gl wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with flanges,nuts, bolts, washers, gaskets, welding conforming to IS 13095 of following sizes as required. 150mm Size

Supply of Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel,ISI marked,conforming to IS 5290 (type A) with blankGunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel

Supply and Installation of End Cap for Hydrant Valve

Supply of UL Listed of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets,center bracket, stockbar of following sizes complete as required. Size:1500mm

Supply Installation Testing and Commissioning of Door Glass for Fire Hose Box of minimum Size 12.5"x8.5" with gasket ,adhesive & accessories as reuired to complete the job.

Supply Installation Testing and Commissioning of Door Glass for Fire Glass Door of minimum Size 32"x8.5" with gasket ,adhesive & accessories as reuired to complete the job.

Supply of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centrigrade with required accessories for pendant sprinkler

Supply, installation, testing and commissioning of non-return valve of following sizes with required accessories to complete the job for 4 way inlet :63 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :80 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :100 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :125 mm

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required :150 mm

Providing, installation, testing and commissioning of M.S. hose cabinet stand mounted type fabricated out of M.S. sheet of 16 swg suitable for keeping 2 nos. of 15 mtr hose pipe. With glass fronted (4mm thick glass with rubber beading) with sticker of "Fire Hose Box" on the Box, central opening glazed door with necessary locking arrangement with key and size of cabinet shall be 600mm x 750mm x 250mm ,quoted rate shall be includes suitable stand for mounting all fasteners etc. and cabinet shall powder coated of approved colour both inside and outside.

Supply,installation,testing and commissioning of glycerin filled pressure gauge range 0-10 kg/sq cm with minimum 4" dial size bottom threaded conforming to IS:3624 to fix on existing fire hydrant pipe for measuring pressure including all required accessories,welding,labour,transport etc to complete the job.

Painting (two or more coats) on fire pipes and fittings with Red anticorrosive paint of approved brand and manufacture,over and including a primeing of ready mixed zinc chromate yellow primer on new work: 80 mm diameter pipes

Painting (two or more coats) on fire pipes and fittings with Red anticorrosive paint of approved brand and manufacture,over and including a primeing of ready mixed zinc chromate yellow primer on new work: 100 mm diameter pipes

Painting (two or more coats) on fire pipes and fittings with Red anticorrosive paint of approved brand and manufacture,over and including a primeing of ready mixed zinc chromate yellow primer on new work: 150 mm diameter pipes