Work-07 Repair and footpath construction work in the green belt of Ward 30 and 62 Govindpuram G and H Blocks.

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).

Demolishing cement concrete Nominal concrete or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in-charge.

First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed as per the direction of engineer - in -charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a)

12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM)

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats. SOR 2022 ITEMN. 15.27 NEW ITEM

Finishing wall with weather coat of approved make and quality on old surface with two or more coat to give an even shade after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work SOR 2022 ITEMN. 15.24 NEW ITEM

M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21.

Fainting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready ed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compactig with vibratory roller to achieve desired density, complete as per Clause 401 GRADE 1

Supply & laying 60 mm thick Precase cement concrete ishape interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plandimension 200X(160+120mm) of O.P cement smoothing gloss finish, skid resistant manufacturered from rubber moulds

S/L C:C (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2022 279 (a).