REPAIR REPLACEMENT OF CEILING WALL PANELLING WOODEN FLOORING AND ALUMINIUM AND WOODEN JOINERY IN SECTOR B UNDER GE 865 EWS

Amount

Dismantling timer scantling over 40 sqcm in section in any position.

M&L for 2nd class soft wood clean sawn as in scantling fixed with nails.

Dismantling timber scantling under 40 sqcm in section in any position.

M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members.

M/L 12mm thk plywood, grade BWR, type BB, fixed with screws to timber frame work

S&F Anodised aluminium snap grid frame work for false ceiling including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

M&L for 9mm thick prelaminated particle board interior grade , prelaminated one side with decorated choice lamination and other sidw balancing white fixed with screws or nails to timber frame work as in wall pannelling/ceiling/cup board shutters

M&L for 6mm thick ply wood BWR,type BB as in ceiling / boarding fixed with screws to timber frame work .

All as per item No 10 but except ply

M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and 3 mm thick foam as per manufacturer's instructions, including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as spfd and directed.Make and shade of tiles be all as approved.(Action tesa)

S&F of wooden panelling on vertical surface of wall using following specifications complete all as specified and directed:- (a) S&F Iind class hard wood wooden gutties of size 25mmx25mmx200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S&F horizontal rummer Iind class soft wood(Kali( at 120 c/c of sextional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment. (c) S&F 1st cl soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces ofve a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners. (d) S&F 1st class soft wood(Deodar) decorative breading 40mm wide on top surface of wall panelling including two coats of vernish.

Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames

All as per item No 14 but n.exc 1.50 Sqm

Taking down shutter only exc 1.00sqm but nexc 2.00 sqm

S&F IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F 35 mm thick 2nd class softwood,glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L for 30mm thick IInd class soft wood glazed and skelton shutters as in windows open rebated and prepared to receive glass gauge etc,divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitered beads for securing glass gauge etc :sizes of members of shutters as spfd in SSR Part I ,section 8 , clause 8.24(b) .

S&F only 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position

S&F only 100mm long aluminium anodised barrel tower bolt of extruded section in old or new position

S&F aluminum door handle cast type 150 mm in old or new position

S&F aluminum door handle cast type 100 mm in old or new position

S&F 250 mm long aluminum door sliding door bolt incl all necessary fitting and bolts.

S&F 100mm long mild steel medium weight but hinges cold rolled.

S&F MS butt hinges medium weight cold rolled 75 mm long

S&F 375mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads.

S&F 4.8 mm thick sheet glass ordinary quality in any position and glazing with oil putty, glazing clips /beading as per site requirement n'exc 0.5 sq.m in each pane.

S&F 4.8 mm thick sheet glass ordinary quality in any position and glazing with oil putty, glazing clips /beading as per site requirement exc 0.5 sq.m in each pane.

S&F 3mm thick glass sheet oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc.

S&F in repair galvanished mild steel wire cloth .56mm nominal dia of wire and average width of apperature 1.18mm and fixed with tinted tacks, or galvanised wire staples.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

S&F in repair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg.

S&F brass mortice lock four levers (Harrisons) vetrical type size 100mm or above in old or new position as directed by Eng-in -incharge.

Mehar Enterprises

ESS AAR ENTERPRISES

M/S HIGHLAND ENGINEERING

M/S TSERING WANGDUS

M.S Sharma Enterprises

M/S STANZIN NOBROO

M/S SHAMSHER ALI SUFI