Work for construction of fencing of shed, lying of CC interlocking paver etc. and gardening work in the open area of subordinate rest house at 220kV Sub Station, BBMB, Kurukshetra

Earthwork in excavation in foundation strenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in15cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. (Ref. Pb. CSR-2020, 6.6)

Cement concrete 1:6:12 (a) With brick ballast 40mm gauge (i) Mixing by manual means (Ref. Pb. CSR-2020, 10.8 (a) (i))

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth (Ref. Pb. CSR-2020, 11.5)

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) Mixing by manual means (Ref. Pb. CSR-2020, 10.13 (a) (i)), A&C Slip No. 1

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines. (Ref. Pb. CSR-2020, 10.27)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position (Ref. Pb. CSR-2020, 18.4)

Providing & fixing of 10-gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat. (Ref. Pb. CSR-2020, 18.31)

Welding by gas or by electric plant, including carriage to and from workshop etc. (Ref. Pb. CSR-2020, 18.28)

12.5 mm thick cement plaster 1:4 (Ref. Pb. CSR-2020, 15.9)

Earth filling:- Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto40%excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres. (Ref. Pb. CSR-2020, 6.8 (a) (i))

Laying of Dry-stone Ballast 40mmgauge for flooring. (Ref. Pb. CSR-2020, 14.2)

Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRCSP63-2014 and of approved size and design/ shape laid in Ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge. (Ref. Pb. CSR-2020, 14.139/A), A&C Slip No. 5

Finishing walls with exterior decorative cement-based paint such as snowcem, robbiacem etc. two or more coats to give an even shade (Ref. Pb. CSR-2020, 16.13), A&C Slip No. 1

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (Ref. Pb. CSR-2020, 16.20)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (Ref. Pb. CSR-2020, 16.17)

Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, rough dressing and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting grass roots in rows 10 cm a part in both directions, watering, weeding and maintenance till turf is formed. (Ref. Pb. CSR-2020, 32.7)