REPAIRS TO ROOF SHEET, HARDSTANDING, FLOORING AND OTHER ASSOCIATED WORKS OF CERTAIN UNIT UNDER GE KAMPTEE.

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheet in roof covering complete all as specified and directed.

Dismantling timber fillets, rails, posts, rafters, purlins under 40 sq cm in section complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

S&F mild steel work as in roof trusses (framed), purlins trussed and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete / sub base complete all as specified and directed.

M&L for 50mm thick cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in PCC path / hard standing finished fair and even complete all as specified and directed.

M&L for 75mm thick cement concrete (1:2:4) type B2 (using 40mm graded stone aggregate) as in PCC path / hard standing finished fair and even complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size, conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30mm thick complete all as specified and directed. Note:- Sand cushion will be measured and paid separately.

M&L for sand filling under cushion of paver blocks complete all as specified and directed.

M&L for chequered tiles 300 x 300 x 25mm thick, coloured rubber finished, set jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in copings, plinth courses including weathering, slightly rounded or chamfered angles and throating on edges complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding but not backing complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300 x 450 x 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of CM (1:6) for laying of floor finishes complete all as specified and directed.

All as per item No 18 above but as in skirting with 10mm backing in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square / rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layers of CM (1:6) for laying of floor finishes complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillar but excluding ashalar facing etc complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15 mm thick CM (1:6) on brick or concrete surfaces finished fair even complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe-410 W (Gde E-250) quality B complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards /blankets any thickness, including cover fillets complete all as specified and directed.

M&L for non-asbestos designer fibre cement building boards of size 595 x 595 x 4mm fixed or laid/ inserted to GI frame work with screws/clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.3mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.3mm thick with height 32mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasteners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling boards shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.39,700.00]

VIJ ASSOCIATES

S D WAGHAMSHI

Alert Multipurpose Services

chronicle enterprises

Bidder Name

m/s A.A brothers

S D WAGHAMSHI

chronicle enterprises

VIJ ASSOCIATES

Alert Multipurpose Services