PROVN OF PERIMETER LIGHTS AND SOLAR LIGHTS AT CERTAIN UNITS AT JAISALMER MIL STN

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in Soft/Disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc not exceeding 10 sqm on plan and getting out in Hard Rock complete all as specified & directed by Engineer-in-Charge. Note :- Hard rock obtained shall be stacked properly at site for measurement and issued under Schedule of credit after deducting 50% for voids. Remaining material considered for removal.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- For the purpose of payment only punned thickness shall only measured).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified and directed by Engineer-in-charge.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete (1:4:8) type D-2 using 40mm grade stone aggregate in foundation of pole/struts etc including necessary form work complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:3:6) type C-2 using 40mm grade stone aggregate in foundation of stay assembly/pole including necessary form work complete all as specified & directed by Engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B-1 using 20mm grade stone aggregate for couping/encasing around of pole including necessary form work finished and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

Supply, transportation fixing and errection of Steel Tubular Swaged poles complete with cast iron base plate, finial taper pulg, bolts, nuts and screws as specified type 410 SP-31 (9.0 meters long) and including making alternate white and black strips 30cm height (Total 05 Nos) with two coats of synthetic enamel paint over a coat primer complete all as specified & directed by Engineer-in-charge.

M&L Steel Tubular Swaged welded Pole, type 410 SP-22 (8.5 metres long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws, etc. including applying Two Coat of Black Bituminous Paint Internally and Externally up to Planting Depth and applying with Two Coats of Aluminium Painting over a Coat of red oxide primer with Synthetic Enamel Paint (First Grade/quality) complete all as specified & directed by Engineer-in-charge. Note : Earth work and PCC work will be measured and paid separately

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and individual optical lense with high power LED with wattage not less than 2.5 watt and integral poted type electronic constant current driver, PF ≥0.95 and system efficiency ≥100 and CRI≤70 suitable for 90 Wattage complete all as specified and directed by Engineer-in-Charge. Note: Manufacturar should submit LM 79 and LM 80 Certificate along with inhouse NABL accrediated lab testing certificate and photometry test certificate of the batch of LED supplied.

S & F of security light bracket with GI pipe medium grade of size 40mm dia bent to shape of length 1.2 meter including flat iron clamp made of FI 40 mm x 6 mm, nuts, bolts, washers etc( Two sets) duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in-charge.

S&F Pole mounting box made out of PVC FR grade (Syntex) with bus bar - 03 Nos for phase & 01 No for Neutral 32 Amps supported on insulators and one No. MCB 6 Amps, clamp made out of FI 25x4mm nuts, bolts and washers etc duly painted with two coats of synthetic enamel paint over a coat of red oxide primer on clamp complete all as specified & directed by Engineer-in-charge.

Supply and Fix Cable PVC insulated and PVC sheathed 1100 Volts grade Copper conductor 2.5 Sqmm 3 Core etc complete all as specified & directed by Engineer-in-charge.

S&F Advance Microcontroller and real time clock base astronomical timer panel suitable for 3 phase 415v,AC having 8 bit micro controller with inbuilt battery,16 character two line LCD display, input isolator 63 Amp 4 pole and 3 Phase output with 6 Nos 25Amps MCB SP and with complete copper conductor power wiring inside 2mm(16/18guage) thick feeder panel duly power coated complete with 40X40X5mm 45CM height angle iron structure with PCC complete suitable for 15 KW load complete all as specified & directed by Engineer-in-charge.

Supply and Fixing Feeder Filler box outdoor type not less than 0.60m x 0.60m x 0.60m made out of 3 mm thick CRCA sheet powder coated supported on angle iron frame 40x40x5mm having legs 1.2 Mtrs long grounted in the PCC upto 60cm, aluminium busbar 03 Nos rated capacity 400 Amps for phase and 01 No rated capacity 200 Amps for neutral supported on porcelain insulator, PCC foundation 1:2:4 and cable gland including taking down old U/S feeder piler box complete all as specified & directed by Engineer-in-charge.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom, burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground levl connected to galvanized iron strip 32 x 6 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection and testing on completion complete with funnel, earthing chamber and earthing lid cover complete all as specified & directed by Engineer-in-charge.

[i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

S&F Lithium based energy efficient Integrated solar street light of 40 watt in single FRP body with duly polyurenthane coating encases with monocrystalline solar PV panel of 30/35Wp, Lithium battery 11.1/12.8 Volt, 19.8 Ah with inbuit BMS, IP 65, High brightness W-LED (160-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor,Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc complete all as specified & directed by Engineer-in-charge. Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint.

SANJOLI CONSTRUCTION COMPANY

M/s Bajrang Electricals

star electricals

M/s Yash Electrical and Maintenance

BB ELECTRICALS

M/s Shree Construction Company

Manisha Enterprises

Leelashah Enterprises