PROVISION OF CERTAIN REVENUE WORKS AT HEMRL UNDER GE(I) RnD PASHAN, PUNE

Amount

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, complete all as specified and directed within a lead of 50 m and lift upto 1.5 m All kinds of soil complete all as specified and directed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 type B1 (using 20 mm graded stone aggregated) complete all as specified and directed.

Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 and Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coats applied @ 0.90 ltr/ 10 sqm over and under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete all as specified and directed.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking -Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 ) . complete all as specified and directed by Engineer-in-Charge.

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in cement mortar 1:6 complete all as specified and directed.

Material and labour for Rendering 12mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, Complete all as specified and as directed by Engineer-in-Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for any thickness complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Metres lead complete all as specified and directed.

Providing and laying double charged Vitrified tiles polished finish of size 600mm x 600mm in floor of thickness not less than 9mm to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick in cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.complete all as specified and directed.

Providing and laying Vitrified tiles in different sizes of thickness not less than 9mm conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc complete and stacking within 50 metres lead complete all as specified and directed.

Providing and fixing aluminium work for frames for windows (three track), ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be Powder coated (minimum thickness of powder coating 50 micron) smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and complete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing fly proof stainless steel With aluminium beading grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm complete all as specified and directed.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With frosted glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) with EPDM rubber / neoprene gasket etc. complete all as specified and directed by Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sliding shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete all as specified and directed by Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately).

Material and Labour for Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs and prepare the surface even and smooth to scratches and apply two coat of Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade over a coat of primer including 3mm thick wall care putty on wall as per manufacturer's instruction complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches (not exceeding 1.5 m in width or 10 sqm on plan), including up rooting of rank vegetation, green bush wood trees and saplings of girth up to 30 cms measured at a height of 1.0 m above ground level dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kind of soil complete all as specified and directed

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 typeD2 (graded stone aggregate 40 mm nominal size) complete all as specified and directed.

Material and labour for random rubble masonry with hard stone in foundation and plinth upto plinth level with Cement mortar 1:6 complete all as specified and as directed.

Material and labour for random rubble masonry in CM 1:6 with hard stone in superstructure above plinth level and upto floor five level complete all as specified and as directed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5M complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes cut to size and fixed in walls as in weep holes complete all as specified and directed.

Extra over for stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses with 40mm deep in granite or trap stone complete all as specified and directed.

Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 1:2:4 using type B1 graded stone aggregate 20 mm nominal size complete all as specified and directed.

Material and Labour for rendering 12 mm thick in cement mortar 1:4, complete all as specified and directed.

Supply and fix at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete all as specified and as directed.

Material and labour for steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In angle iron post & strut of required size, gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and directed.

Providing and fixing GI chain link fabric fencing of required width in mesh size 50x50mm, made of GI wire of dia 4mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete all as specified and directed by Engr-in-Charge

Material and labour for preparation of newly plastered wall surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old surface as per manufacture instruction complete all as specified and directed by Engr-in-Charge.

Material and Labour for painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two coats over a coat of primer on new work on steel surfaces complete all as specified and directed.

Providing and Fixing in repair Armstrong OPTRA ceiling tiles with Silhouette 15mm face exposed grid (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed silhoutte grid The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm face exposed grid colour white having rotery stitching on all silhoutte type T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum thickness of wire 2mm with pull out strength of 100 Kgs. grid fixed with butterfly clip for grid. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system and necessarey aluminium angle of Armstrong make, including taking down old ceiling etc complete all as specified and directed.

Supply and fix aluminium composite sheet cladding natural colour wood/ stone any type using 3 mm thick sheet of approved make consisting of a core of 3mm natural polyethylene core sandwitched between two skins (0.5mm each) of aluminum alloy with outer surface in all colour coating of PVDF paint in fully automatic coil coating process. The PVDF coated finished surface to factory protected with self-adhesive peel off oil tested. The composite sheet cut and bend to shape profiles as required to, including perimeter extrusions base frame, extruded stiffeners, expansion fasteners & silicone sealant (Dow corning 789) required for installation as per approved elevation drawing as directed including necessary accessories complete in all respects. The rates shall be including the cost of all materials, 25 x 38 mm 18 gauge aluminium box pipe and then fixed with 25 mm x 38 mm 18 gauge ‘ L’ angle and 3mm VHV tape and weather sealant tools, tackles, manpower, fuel, consumables, lead and lifts at all levels, design, fabrication, erection, finishing and dismantling of scaffolding and testing of water tightness, etc. as per manufacturerer's instructions / specifications complete all as specified and directed by Engr-in-Charge.

Taking down copper/aluminimum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets , light fitting etc removing materials to store for keeeping in safe custody of for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces for walls, floors, etc complete all as specified and directed.

Group 'A' Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FRLS PVC insulated unsheathed copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc complete all as specified and dircted by Engr-in-Charge. (a) One light point controlled by one : one way switch

(b) One ceiling / exhaust / wall fan point controlled by one : one way switch

Supply and fix LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Dismantling of ceiling / exhaust fan and cleaning of surface with detergent and replacing the down rod with new down of 19mm dia and 80mm length including replacement of damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required complete all as specified and directed

Taking down unserviceable distribution boards of any size with RCBOs/MCBs/MCCBs any type for taking schedule of credit complete all as specified and directed

Supply and fixing in repair 8 way (4 + 12), double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar din bar, inter connections, powder painted including earthings etc as required (but without MCB/RCCB/Isolator) complete all as specified and directed Note : Serviceable MCCB/MCB shall be deposited at E/M store yard for re-use.

Fixing only MCCB and MCB retrieved for item No 43 above in the DB including connecting all incoming and outgoing circuit complete all as specified and directed

Wiring for circuit submian wiring alongwith earth wire with 2 x 4 sqmm + 1 x 4 sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required complete all as specified and directed

Wiring for circuit submian wiring alongwith earth wire with 2 x 6 sqmm + 1 x 6 sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required complete all as specified and directed

Supply, laying & testing XLPE insulated, PVC sheathed cable galvanished steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 10 sqmm 4 core, 1100 Volts grade complete all as specified and directed

M/S NILESH BUILDERS (BID ID -3475633)

AJAY ENTERPRISES (BID ID -3481682)

S.K.HARAL (BID ID -3475580)

M/S SAMRUDHI CONSTRUCTION (BID ID -3475997)

sanjay m. suryawanshi (BID ID -3475724)

Rays Breakers (BID ID -3476147)