WELCOME MAINTENANCE AND PERIODICAL SERVICES TO OFFRS MD ACCN INCLD INTERNAL ELECTRIFICATION UNDER AT GE NORTH AKHNOOR

Amount

Preparaing old surface (plastered or unplastered) by brooming down or steel wire brushing and applying one coat of white wash on walls, complete all as specified and as directed by Engineer-in-charge

Ditto all as per item No 01 but two coats of white wash including complete removal of existing treatment.

Ditto all as per item No 01 but one coat of white wash on ceiling.

Ditto all as per item No 01 but one coat of cement base paint on wall.

Ditto all as per item No 01 but one coat of oil bound distemper on walls.

Ditto all as per item No 01 but two coats of oil bound distemper on walls.

Preparation of old painted surfaces of steel of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as spd and directed.

Preparation of old painted surfaces of wood of any description exc 10 cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed.

3mm thick (in two layer) wall care putty on wall (Max 1.5 mm thickness for both layers) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm including tarring ends and back of chowkats and lugs complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs complete all as specified and directed

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed by Engineer-in-Charge

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

30mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as spd.

Prelaminated solid board 18/19mm thick prelaminated one side with decorative 2,4 or 6 design and back side plain fixed with screws with tiber frame work, PVC door frame/steel door frame as in wall panelling cupboard shutter and pelmet boxes complete all as specified and directed.

Steel windows/ventilator (Box type) factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

Ditto all as per item No 22 But fixed in repair.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads exceeding 1.5 Sqm complete all as specified and as directed by Engineer-in-Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as spd.

Floor door stopper 150mm length of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as spd.

300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plates complete all as specified and directed.

100 mm butt hinges, medium weight cold rolled mild steel all as specified and directed.

75 mm butt hinges, medium weight cold rolled mild steel all as specified and directed.

Aluminium anodised handle extruded section and fixed in repairs of size 150mm all as specified and directed.

Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

Aluminium anodised barrel tower bolts extruded section of size 200mm, all as specified and directed

Small fittings such as bracket of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labour, article not exc. 200 cucm each of 2nd class hard wood, complete all as specified & directed.

Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Taking down eaves gutters and rain water pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc all as specified.

110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints "fixed in wall etc" all as specified.

PVC (SWR) bend 110mm bore all as spd and directed.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.

Rendering 15mm thick cement plaster in two layers on fair faces of brick work or concrete surfaces in cement mortar (1:4) with WPC & finished even and smooth without using extra cement and two coat of cement base paint complete all as specified and directed.

Rendering 10mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces of soffits of chajjas, roof projections or ceiling and finished even and smooth without using extra cement and three coat of white wash complete all as specified and directed.

Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces as in ceiling, complete all as specified.

Supply only integral water proofing compound.

Repairs to balcony/Facia and soffit of chajjas etc by taking down old rendering 20 to 25 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth complete all as specified.

Preparation of new treated surface and apply three coat white wash on ceiling complete all as specified and directed.

Preparation of new surfaces and apply two coat of cement base paint to walls including one coat of cement primer complete all as specified and directed.

Rotational moulded polyethiene water storage tanks of capacithy 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow piecces long nipples, checknuts and washer etc including dismantling existing water tanks of any description complete all as specified and directed.

Rotational moulded polyethiene water storage tanks of capacithy 1000 litres, (cylindrical vertical with closed top) hoisted and fixed(Sintex made) in possition including S & F necessary GI fittings, inlet/outlet washout, overflow piecces long nipples, checknuts and washer etc including dismantling existing water tanks of any description complete all as specified and directed .

Ball brass valves high pressure, with polythene float and fly nut complete, screwed from iron pipe or brass ferrule size 20mm complete all as specified & directed.

Ball brass valves high pressure, with polythene float and fly nut complete, screwed from iron pipe or brass ferrule size15mm complete all as specified & directed.

Taking up or down steel tubing and connections, 15mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

GI water tubes 15mm bore dia medium grade galvanised (ISI Marked) with all fittings and fixed complete to walls and ceiling or laid in floor including taking down existing water tubing all as specified and directed

GI water tubes 20mm bore dia medium grade galvanised (ISI Marked) with all fittings and fixed complete to walls and ceiling or laid in floor including taking down existing water tubing all as specified and directed

CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore fixed in repairs complete all as spd and directed.

Brass Cp mixer for sink, cast copper alloy (ISI Marked) fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore fixed in repairs complete all as specified and directed.

Stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore fixed in reapirs complete all as specified and directed.

Stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20mm bore fixed in reapirs complete all as specified and directed.

CP Bib taps cast copper alloy, fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore fixed in repairs complete all as specified and directed.

CP brass wall mixture with telephonic shower arrangement for mixing hot cold water supply screwed down incld connecting legs & wall flanges for iron pipe 15mm dia bore fancy type in repair complete all as specified and directed.

Vitreous china wash basin, coloured, flat back, size 550x400mm pillar mounted brass waste fittings, steel chain and rubber plug, including waste pipe porcelain stopper, a pair of CI brackets, fixed in repair complete all as specified and as directed by Engineer-in-Charge. Notes : - (i) The wash- basins shall be ISI marked, Ist quality (ii) Waste pipe shall be of 32mm bore, low density polyethylene pipe (LDPE) of pressure rating 6 Kg-f/cm2 and of the required length to suit the site requirement all as required and ordered. (iv) The rate quoted shall be deemed to include for taking down old WHB complete with all fittings including cutting holes for taking out old brackets and supplying and fixing new WHB with new fittings and new C.I. brackets and also P.C.C. blocks of P.C.C. 1:2:4 type B-1 using 20 mm graded stone aggregate of size 10cm x 7.5cmx15cm for fixing brackets.

Sink with draining board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. Note : The Sink shall be ISI marked.

Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (excluding supply but fixing of flushing cistern and flush pipe) fixed in repair complete all as specified and as directed.

PVC flushing cistern low level of capacity of 10 liter, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified & directed.

PVC connection 15mm size with PTMT nuts of length 450mm size complete all as spd and directed.

CP Swivel shower rose of PTMT any colour for fixing with 15mm pipe complete all as spd and directed.

15mm bore piller cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked fixed in repairs complete all as specified & directed.

Hand shower health faucet with 1 mtr long easy flexible chromium tube in chroe finish and wall hook all as specified.

Coloured Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws, fixed in repair complete all as specified and directed.

Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed by Engineer-in-Charge.

Soap dish, any type, fixed to plugs with chromium plated brass screws fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Glass shelf assembly fixed in reapirs complete all as specified

Curtain rail, 20 mm dia anodised aluminium alloy ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified.

25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, as in sub base of floor complete all as specified and as directed by Engineer-in-charge.

Non skid coloured ceramic tiles grade B-IIa 7mm to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in light shade floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces incl 15mm thick screed bed/bedding layers in cm 1:4 all as spd & directed.

Vitrified ceramics coloured tiles 10mm thick polished area of each tiles n.exc 0.36 Sqm grade B IIa laid as in floors/skirting etc, set and jointed in neat cement slurry and pointed in whitc/coloured cement to match in light shade incl 10mm thick screed bed/base in CM 1:4 complete all as spd and directed.

Glazed ceramic tiles coloured (Premier quality) of size 350x250x7mm/450x350x7mm thick, jointing in neat cement slurry and pointing in colour cement to match including incl 10mm thick plaster in cm 1:4 complete all as spd and directed.

Granite (of any type work) 20mm thick (table rubbed and polished) in steps jambs, pillars, window cills, cooking plateform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite incld 15mm thick screed of CM 1:4 after applying cement slurry @ 3 Kg/Sqm of cement per sqm complete all as spd and approved by Engr-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards/ slabs / blankets, any thickness, including cover fillets, all as specified.

GI frame work 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soft it at approx x 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 centre to centre including 4 mm thick non acbestos designer building board in grid complete all as specified.

Sunken Floor treatment : Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as approved including Demolation and filling of sunken floor . (a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b): Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqmhis layer allowed to air cure for 4 Hours. Note: concrete for sunken slabs shall be mixed with WP compounds as per manufacturdrs instructions, before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage /dampeness.is seen in ceilig below, then treatment is again carried out to RCC slab and it is again tested before passing for next stage.

PTMT bathroom cabinet with mirror of size 330x430cm mounted on wall fixed in repair complete all as specified.

Taking down main switchs, distirbution boards etc of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surfaces/portion of walls etc all as specified.

Taking down old and unserviceable sub main wiring of any size and description and removable the same from site and making good the disturbed surfaces/portion of walls etc all as specified.

Taking down carefully unserviceable Copper/ aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.

Sub main wiring with two single core FRLS insulted (Unsheathed) multi stranded copper conductor cable 6 Sqmm (Nominal area)1100 volts grade drawn through existing steel/PVC conduit and including single run continous earth wire of 6 Sqmm single core FRLS insulated (Unsheathed) multi stranded copper conductor cable and connected to common earth dolly, complete all as specified.”. Note: Two runs of 6 Sqmm and one run of 6 Sqmm cable will be measured as one running meters.

M&L for concealed point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable, 1100 volts grade(FRLS) drawn through existing steel/PVC conduit 20mm dia medium grade ISI marked and teminating in MS sunken box covered with and including 3mm thick bakelite laminated sheet top cover "Hylam" and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable (FRLS) as earth continuity conductor and connected to earth dolly complete all as spd and directed by Engr-in-charge for the following :- (a) One light/fan point controlled by one way switch.

(b) One socket outlet 05 Amps on the same board.

(c) One socket outlet 05 Amps on independent board.

(c) One light point controlled by two way switch

M&L for concealed point wiring complete with 2.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable, 1100 volts grade (FRLS) drawn through existing steel/PVC conduit 20mm dia medium grade ISI marked and teminating in MS sunken box covered with and including 3mm thick bakelite laminated sheet top cover "Hylam" for one socket outlet and/or switch-socket-outlet, 15 Amps independent and including 2.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable (FRLS) as earth continuity conductor and connected to earth dolly complete all as spd and directed by Engr-in-charge. Notes for srl item Nos 90 to 94 here-in-before : (i) Rate are inclusive cutting chases and making good disturbed surfaces whereever required. (ii) Proper colour coding should be adopted for phase neutral and earth and halves.

S & F in replacement ceiling rose, 5 Amps surface type 240 Volts bakelite 3 terminal after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement switch piano single pole one way 5 Amps 240 Volts capacity flush after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement switch flush type 5 Amp single pole two way after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement 5 and 15 Amps switch socket combination 2 in 1, 6 Pin flush type multi purpose after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement 5 and 5 Amps switch socket combination flush type multi purpose 2 in 1 type (2 Pin and 3 Pin) after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement socket out let 5 pin 5 Amps flush type on same board after taking down old unserviceable complete as directed by Engr-in-Charge.

S & F in replacement of fan regulator electronic step type 230 volts suitable for any type of ceiling fan sweep on the existing phenolic laminated sheet etc after taking down old unserviceable complete as directed by Engr-in-Charge

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting all as spd.

Bell push paino flush type 5 Amps.

Bell, Ding Dong AC, 230 volts single pole.

Supply and fix in replacement of MCB of 10KA repturing capacity of the following :- (a) Single pole & neutral 240 volt 6 to 32 Amp 'C' series

Ditto all as per item No 105 here in before but Single pole & neutral 240 volt, 6 to 32 Amp 'B' series

Ditto all as per item No 105 here in before but Single pole 240 volt, 40 Amp 'C' series

Ditto all as per item No 105 here in before but Single pole 240 volt, 63 Amp 'C' series

Ditto all as per item No 105 here in before but triple pole and neutral (TPN) 415 volt, 63 Amp 'C' series

Supply and fix in replacement of sheet steel enclosure for flush/surface mounting distribution board factory made and tested complete protection class IP 36 suitable for mounting MCBs with 200 Amps tinned copper bus bar cable lugs complete of the following capacity :- (a) Single pole & neutral 240 Volt 8 ways.

Ditto all as per item No 110 here in before but single pole and neutral 240 volt, 12 ways double door.

S & F in replacement 20 Watt LED energy saving light fitting enviromental friendly long life LED street light made up of pressure dia cast aluminium housing with acrylic cover as diffuser with IP66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 No. of FI clamps 32x4 mm with suitable size nuts, bolts, washers etc and making the connection from junction box to fitting with suitable size twin core copper conductor cable complete with replaced to unserviceable existing fitting all as specified and directed. Make : Havells Cat Pat No. LHEWEBP7PLS020 or equivalent in CG/Bajaj/Philips.

S & F in replacement wall mounted LED batten, 18 w, 230v, Decorative ultra slim with extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete including connecting up with twin core twisted flexible copper conductor cable with suitable size with replaced to unserviceable existing fitting all as specified and directed. Make: Havells Cat pt No. LHEXBLP7IN1W018 or equivalent CG/ Bajaj/Philips

S & F in replacement Energy saving 10 watt LED bulk head luminaries, 230 V 50 Hz with opal diffuser complete with replaced to unserviceable existing fitting all as specified and directed. Make: Havells Cat pt No. LHEOAOP7UZ6W010 or equivalent CG/ Bajaj/Philips

Supply and fix in replacement of VTPN sheet metal enclosure double door type for DBs tripple pole and neutral 4 way 415 V with 200 Amp bus bar including blanking plates where required . Make:Havells, Cat pt No.DHDLVDRWAOFO04 or equivalent in standard/ Indoasian/C&S/L&T

Supply and fix MCCB 16KA, 4P, 415V, 50 Hz of Cap 63 Amp suitable for fixing in VTPN DB all as directed. Make:- Indoasian/C&S/L&T/Havells

JR CONSTRSTRUCTION CO.

CHOPRA CONSTRUCTIONS

PACHNANDA BUILDERS

Bidder Name

ASIA ENTERPRISES