Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.2 LAccepted-AOC WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹49.2 L+₹83,848.80 (1.73%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PROVN OF CERTAIN B/R AND E/M SANCTIONED WORK IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2022_MES_556600_1
GE/DE-58/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,000
Yes
7 Jan 2023
8 Oct 2022
7 Nov 2022
8 Oct 2022
5 Nov 2022
22 Oct 2022
Amount
Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.
Demolition of Reinforced cement Concrete in any description and any position n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-Charge.
Demolition cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed
Dismantling of cast iron or reinforced concrete drain pipes including all fittings and accessories, 100/75 mm dia in any position complete all as specified and as directed by Engr-in-Charge.
Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing to store complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm and refixing or resecuring in same opening after easing, adjusting complete all as specified and as directed by Engr-in-Charge.
M&L Mild steel framed work such as grills, gratings, door chowkhats etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 all as specified .
S&F stainless steel 8 mm square bar as in window grills, design & pattern as approved by GE, complete all as specified and directed.
S&F for Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete all as specified and as directed by Engr-in-Charge.
S&F Fiber Glass Reinforced Plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame complete all as speified and directed. Note : Colour and pattern shall be approved by GE.
S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed. Note : Colour and pattern shall be approved by GE.
S&F for 30-35mm thickness flush shutters, solid core construction, with particle board core and plywood face panels both faces covered with decorative face veneer with lipping incl edge to match frame complete all as specified and directed.
S&F SS butt hinges 100mm long medium weight cold rolled complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised barrel tower bolts of extruded section 150 mm long bolt, all as specified .
S&F aluminium anodised handle cast type of extruded section 125 mm long fixed with screws complete all as specified and as directed by Engr-in-Charge.
S&F aluminium anodised sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge.
S&F Mild Steel 250mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified
Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete
Taking down Kitchen Cabinet/wardrob/shelf/cupboard etc similar article in any description and any position and removing from site including all fittings and frame work, complete all as specified and as directed.
S&F and fabrication of wardrobe/ cup board made out of 18-19 mm thick PVC board of density 600 kg/cum laminated sheet on both sides, color as approved by GE, complete all as specified and directed.
PVC sheet white 15 mm thick fixed with approved adhesive and stainless steel machine screw (Star) in narrow widths exceeding 10 cm width, complete all as specified and as directed.
S&F and fabrication of modular kitchen made out of 18-19 mm thick BWR PLY/HDHMR with laminations on both sides for base cabinets & upper cabinets, stainless steel basket consisting with the following specification :- (a) Multipurpose basket of size 21”x20”x4” (02 nos) with 5.3 mm thick SS wire. (b) Multipurpose basket of size 21”x20”x8” (01 No) with 5.3 mm thick SS wire. (c) Fix box cuttlery basket of size 21”x20”x4” (01 No) with 5.3 mm thick SS wire. (d) Cup & saucer basket of size 21”x20”x4” (01 No) with 5.3 mm thick SS wire. (e) Plate basket of size 21”x20”x6” (01 No) with 5.3 mm thick SS wire. (f) Multipurpose basket of size 17”x20”x4” (01 No) with 5.3 mm thick SS WIRE. (g) Grain trolley with mechanism basket of size 17”x20”x13” (01 no) with 5.3 mm thick SS wire. (h) Detergent holder SS minimum wt of wire basket 0.75 kg (01 No). (j) Bin Holder SS minimum wt of wire basket 0.50 KG (01 No). (k) Plate Basket of size 21”X20”X6” (01 No) WITH 5.3 mm thick SS wire. (l) Thalli Basket of size 21”x20”x8” (01 No) with 5.3 mm thick SS wire. (m) GTPT SS of size 24”x10”, minimum wt 1.80 kg (01No). (n) Stainless Steel hydraulic auto soft close hinge as reqd at site. (o) Stainless Steel telescopic channel as reqd at site. (p) Stainless Steel handles for cabinets as reqd at site. (q) Stainless Steel double bowl sink 3’ long incl waste pipe, CP waste coupling.
S&F 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.
S&F 100mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.
S&F Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete
S&F 65 mm size brass Cup board lock, 4 lever grade I of superior quality all as specified and directed.
S&F Floor door stopper of brass body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete.
S&F in repair 20mm dia Stainless steel curtain rod with of superior quality fixed complete all as specified
S&F Stainless steel End bulb and SS bracket suitable for 20 mm dia drapory rod plete all as specified.
M&L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 20 mm thick screed bed in Cement Mortar (1:4) complete all as specifed and dircted .
Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing etc complete
M&L for drilling and making hole in marble/granite slab of cooking plateforme for cooking gas pipe etc n. exc 25 mm dia all as directed by Engineer-in-Charge.
M&L for Vetrified ceramic tiles ultra charged 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of cement mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified
All same as per srl item No 38 above but laid over and including 10mm thick CM 1:4 as in backing coat for dado/skirting complete all as specified.
M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified and as directed by Engr-in-Charge.
M&L 1st/Premium quality glazed ceramic digital coloured tiles with highlighter of size 300x 600x 7 mmthick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles laid over and including 12mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.
M&L for reinforced cement concrete (nominal mix) in shelves supported on walls using cement concrete type B-1 1:2:4 (20mm gde agg) complete all as specified and as directed by Engr-in-Charge.
Formwork to soffits of suspended slabs such as shelves not exceeding 200mm thick rough finished flat surfaces of concrete complete all as specified and as directed by Engr-in-Charge.
Form work to edges of concrete flat exc 5 cm but n-exc 10cm wide for rough finished flat surfaces of concrete complete all as specified and as directed by Engr-in-Charge.
M&L TMT bar 10mm dia and over dia cut to length, bent to shape required incl cranking bending and binding with and including mild steel wire(annealed) not less then 0.9mm dia complete all as specified and as directed by Engr-in-Charge.
All same as per srl item No 45 above but 6-8mm dia bars complete all as specified and as directed by Engr-in-Charge.
Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and as directed by Engr-in-Charge.
Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and as directed by Engr-in-Charge.
Cutting chases for concealed water tubing or concealed conduitwiring, etc. and making good, cutting exceeding 20cm girth in CM 1:3 complete all as specified and as directed by Engr-in-Charge.
Supplying and laying 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.
Supplying and laying 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including short lengths, fixed to wall and ceiling or laid in floor complete all as specified and directed.
S&F in repair for 15 mm dia Bib Cock with Wall Flange as per manufacture’s manual complete all as specified and directed Make : JAQUAR OPP-15037PM or equivalnt
S&F in repair for brass 15mm CP Angle stop cock with wall flange complete. Make : JAQUAR AQT- CHR 3057 or equivalnt
S&F in repair for 15 mm dia 2 Way Bib Cock brass CP with Wall Flange complete all as specified and directed Make : JAQUAR OPP-15041PM or equvalent approved
S&F in repair Wall mixture brass CP with Telephonic shower pipe fixed over wall surface as per manufacturets mannual and Square Over Head shower (200mmx200mm) including easy flex shower tube with hand shower 68mm dia round shape single flow (ABS body chrome plated with rubit cleaning system etc complete all as specifed and directed Make : JAQUAR SHFLR 5281N or Hindware equvalent.
S&F in repair sink mixture brass CP with regular swinging spout (wall mounted modle ) with connecting legs & wall flanges) for 15 mm bore complete all as specifed and directed Make : JAQUAR FLR 5309N or Hindware equvalent.
S&F in repair Center hole basin mixer with wall flage 15mm dia chromium plated brass with costed swinging spout including plugging and fixed as position complete Make : JAQUAR FLR 5167NB or Hindware equvalent.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : JAQUAR or Hindware approvd
S&F in repair for corner Acrylic self up of size 225mmx225mm radius fixed in position complete.Make : JAQUAR or Hindware approvd
S&F in repair for Toilet Paper Holder fixed in position complete. Make : JAQUAR ACN 1153N or Hindware equvalent.
S&F in repair for towel rail 300mm long fixed in position complete. Make : JAQUAR CAN CHR 1101S or Hindware equvalent.
S&F in repair for Towel ring fixed in positon complete.Make : JAQUAR 1121N or Hindware equvalent.
S&F in repair for Brass soap dish (Chrome) with wall flange fixed in positon complete.Make : JAQUAR AEC 1131or Hindware equvalent.
S&F in repair Brass chromium plated shower rose 150mmx150mm mm size with or without swivel joints, any size incl SS shower arms fixing to steel pipe or union complete all as specified.
S&F CP brass Health faucet with 1.00Mtr long CP flexible pipe as per approved sample complete all as specified and as directed by Engineer-in-Charge. Make : JAQUAR Ald Chr 563 or Hindware equvalent.
S&F 5.50 mm thick looking mirror with decorative edging on border and moulded edges of requied size area exc 1 Sqm but not exc 2.00 sqm each with suitable fixing arrangements in wall complete all as specified and directed.
S&F in repair PVC Cabinate mirror of size (WxDxH) 45x12.4x55.5 CM fixed with screw and PVC gutty on wall complete all as specified and directed Make: Nilkamal or Cat part B014898ZBY or equavalent approved.
Stainless steel peg set (set of 06 hook) as per sample kept in GE office fixed in position with screw and PVC gutty on wall, fixed in repairs, complete all as specified and as directed.
S&F vitreous chinaware white colour oval shape counter top wash hand basin (WHB) size 550mm x 400mm complete, ISI quality, fixed over granite stone slab including providing and fixing of suitable waste pipe and waste fitting coupling 32 mm bore long screwed shank and fly nuts complete all as specified and directed.Make Cera/Hindware
S&F in repair Vitreous china squalting pan of Orrisa pattern long pan size 580mmx440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor. Make Hindware
S&F in repair Vitreous china floor mounted toilet one piece type (white) including connection in drain etc incl ,plastic water closet seat cover, CP Jet sprey and P or S trap, complete all as specified and as directed. Make : Hindware Cat Part No 192055 or equivalent .
S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and as directed by Engr-in-Charge (Make: - Parryware or equivalent in Hindustan Sanitary ware)
S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long complete all as specified and as directed by Engr-in-Charge.
PVC waste pipe 60 to 80 cm long sutible for sink/wash hand basin, fixed in repairs, complete all as specified and as directed.
S&F 1000 Ltr capacity Rotational molded polyethylene water storage tanks (cylindrical vertical with threaded lid cover) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engr-in-Charge.
S&F in repair ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore
S&F in repair Gun metal gate valve with iron wheel head screed both ends for iron pipe and fixed 20mmm bore complete
M&L in repair PVC (SWR)multy floor trap with grating in cluding jointing with solvent cement 75 mm dia
S&F PVC (SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, as in walls/floor complete all as specified.
S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, as in walls/floor complete all as specified.
S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified
S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia
S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified
S&F PVC (SWR) junction double, (double T) equal or unequal of 75mm with access door
S&F PVC (SWR) vent cowl of 110mm bore
S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipecomplete all as specified and directed.
M&L brick work with sub class 'B' straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4) complete all as specified and as directed by Engr-in-Charge.
M&L for 50 mm thick Plain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.
Taking down cement plaster on brick wall including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed by Engr-in-Charge.
M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and fair complete all as specified and as directed by Engr-in-Charge. (Note: Crushed stone sand will be used for plaser work as desired proportions).
M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and fair complete all as specified . Note: 2. Crushed stone sand will be used for plaser work as desired proportion.
M&L for 15 mm thick external plastering on brick work or cement concrete surfaces in cement mortar 1:4, finished even and fair incl mixing of water proofing compound complete all as specified. Note: 1. Water Proofing compound shall be measured and paid for separately 2. Crushed stone sand will be used for plaser work as desired proportion.
M&L rendering 10mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed by Engr-in-Charge.
M & L for two coats of oil emulsion distemper on newly plaster surfaces of wall over a coat of primer including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.
Supply only water proofing compound complete all as specified and as directed by Engr-in-Charge. (Makes :Pidilite Industries / Impermo /Snowcem India Ltd / Sika )
M & L for preparation of old decorated external wall and ceiling surface by sand paper of required sizes filling in wall care putty in potholes existing or created ,again sand papering thus making surface smooth and two coat of weather proofing exterior acrylic emulsion paint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation External wall and ceiling surface old/new by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of premium qualiy exterior acrylic emulsion paint (weather coat) on surfaces complete all as specified and directed by Engr-in-charge. Note : (i) Final finishes to be applied with roller.
M & L for out door coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT
M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified.
M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of Internal wall and ceiling surface old/new by complete removal of existing treatment of walls for upto 4 storey buildings by mechanised sander of Berger Paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools as required and applying a layer of 1mm thick wall care putty, again sand papering thus making surface smooth and applying one coat of primer and applying two coats of interior grade acrylic emulsion paint premium quality on surfaces complete all as specified and directed by Engr-in-charge. Note : Final finishes to be applied with roller.
M&L Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof surface finished even and fair complete all as specified and directed.
M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC complete all as specified and dierected. Note : WPC shall be measured and paid separately
Material and labour for APP polymaric water proffing membrane minimum 3 mm thick and weighting not less than 3.50 kg /Sqm Make as per approved manufactured list black finished rienforced with non weven polystere matt with fusiable finish laid over compatable bitumen primer at the rate of 0.40Ltr/Sqm torching overlaps with a propane of abugane gas torch , with over lap 75 mm at the sides and 100 mm at the ends and sealing all as per manufacture's instructions including preparation of surface, complete all as specified and as directed. Note : the wate profing treatmen shall be carried out by the manufacture or their authorised applicators.
Removing unserviceable building materials etc to a distance upto 5KM m or under, beyond the lead included in the rates, including loading, unloading and stacking at the site specified by MCD complete all as specified and as directed by Engr-in-Charge.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated). (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each
S&F Stainless Steel barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and as directed by Engr-in-Charge.
S&F Stainless Steel handle cast type of extruded section 125 mm long fixed with screws complete all as specified and as directed by Engr-in-Charge.
S&F Stainless Steel sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.
S&F 150mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.
S&F soft closing L bihari stainless steel hinge complete all as specified and as directed by Engr-in-Charge.
Magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and as directed.
M&L for Vetrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified and as directed by Engr-in-Charge.
All same as per srl item No 117 above but laid over and including 10mm thick CM 1:4 as in backing coat for dado/skirting complete all as specified and as directed by Engr-in-Charge.
M&L Rendering 12 mm thick in CM (1:4) as in backing coat for fixing wall tiles complete all as specified and as directed by Engr-in-Charge.
Taking down existing ceiling of any type and any description including cove fillets and frame work complete all as specified and as directed by Engr-in-Charge.
Provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type BO as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0mm. (b) 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers. (c) 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level. (d) E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE
Demolition of lime terracing /Brick bats/Mud phuska /any thickness including old APP membrane /plastering and leaping complete all as specified and dierected.
M&L PCC 1:3:6 type C1 cement concrete using 20mm graded aggregrate in floors filling in foundations mass concrete complete all as specified
M&L brick work with sub class 'B' straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 except bricks complete all as specified and directed. (bricks obtained from demolition here-in-before shall be used)
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
M&L preparation of new plaster or concrete internal surface of walls applying two coat of acrylic emulsion paint over a coat of alakli resistance primer coat etc complete all specified and directed
M&L preparation of new plaster or concrete internal surface of ceiling applying one coat of acyrlic emulsion paint over a coat of alakli resistance primer coat etc complete all specified and directed
Aluminium anodized grills with 6mm x 5mm aluminium section having square or diamond shap with fixing rails of channels 12-15mm complete all as directed.
S&F hollow rectangular pressed steel door frame 18mm gauge for single door fame section of 100 mm x 50 mm with necessary fixing lung, necessary steel hinges incl sutable lock stike plate etc as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.
S&F hollow rectangular pressed steel door frame 18mm gauge for doubble door fame section of 130 mm x 65 mm with necessary fixing lung, necessary steel hinges incl sutable lock stike plate etc as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.
S&F Factory made 2nd class hard wood, 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces with lipping. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L 25mm thick plain cement concrete 1:2:4 type B-0 (48 Sqm 12.50mm crushed stone aggregate) complete all as specified and as directed by Engr-in-Charge.
S&F sinks with drainage board made of stainless steel lmm thick sheet kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
M&L for 75mm thick cement concrete 1:3:6, Type C-1 ( using 20mm graded stone aggregate) as in sub-bases, floors and pavings complete as specified and directed.
M&L PCC type B-1 1:2:4 using 20mm graded aggregate as in filling, and kerb sides at site complete all as specified and directed.
M&L for cutting holes into of through brick walls exc half brick but n exc one brick built in cement mortar for inserting hold fast and making good dismental porton in cement mortar 1:3 or cement concrete 1:2:4 type B1 all as specified and directed
S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.
M&L for coloured non skid ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but n exc 0.11 Sqm as in floor set, jointed and pointed with coloured cement to match laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge
M&L Glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7 thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces laid over and incl 15mm thick backing layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer in Charge
S&F 15mm dia bore water tubing, medium grade, galvanised with all fitting laid in trenches/wall complete all as specified and directed.
S&F in repairs15mm brass CP Mixer for mixing hot & Cold water screwed down for iron pipe complete all as specified and directed.
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) , white, complete all as specified and directed.
S&F in repair Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply only waste fitting brasss chromium plated for glazed ware sinks,basins etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed 32mm dia
S&F in repairs 15mm dia bib taps fancy type , CP cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or brass ferrule fancy type complete all as specified and directed.
S&F in repair corner glass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd.
S&F in repair CP , tubular towel rail 60cm long fixed with and including CP brass screws and wooden /plastic cleats complete
S&F grating doom 100mm dia of PTMT complete all as specified and as directed by Engr-in-Charge.
S&F in repair viterous china white soap dish fixed to plugs with chromium plated brass screws in position complete all as specified complete.
S&F Fabrication & fixing of kitchen cabinet & wardrobe/cupboard made out of 15-18mm thick PVC board (one side laminated and other side balancing white) including providing cabinet for keeping basket s/cutlery basket etc complete all as specified and as directed. Make-Rajshree (Note- Kitchen accessories i.e baskets fittins and fixture will be measured and paid seperately as supply only)
S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site complete as all as specified
S&F 15mm thick white PVC sheet fillet in narrow width not exceeding 100mm wide fixed with approved adhesive and stainless steel machine screws (star shaped head) complete all as specified and as directed
M&L for 1st/Premium quality glazed ceramic tiles with of size 1200x600x12mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles laid over and including 15mm thick CM 1:4 backing coat of mortar complete all as specified and directed.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 300 mm long complete.
M&L for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners withand including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre tocentre. ®
M&L Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F Aluminium powder coated (50micron) auminium door frame section 100xmm x 44mm x 2mm thickness, shutters of aluminium section of size 85mm x44mm x 2mm thick Top rail and both styled of size 100mm x 44mm x 2mm thick lock rail and bottom rail of size 115mm x 44mm x 2mm thick including aluminium anodised snap beading and rubber packing & 5.50mm thick frosted designer glass/12mm thick PVC board (as approved by GE) including 100 mm long aluminium butt hinges 04 Nos each leaf 200mm long tower bolt, 200 mm long fancy type aluminium handle -02 Nos on each leaf, 4 leaver brass 100mm long mortice lock & double action floor door spring/door closer heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and as directed.
M&L Preparing new plastered surfaces of wall and applying two coats of Oil Bound Distemper complete all as specified
S&F in repair fancy type 15 mm Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing.
Roughening surfaces of old concrete floor or wall by picking, sweeping clean and washing down with water to remove dust incl Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.
M&L for glazed coloured ceremic tiles area of each tiles exceeding 0.10sqm but n exc 0.18 sqm on vertical surfaces, such as skirting/dado ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed.
S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type with/without AC opening (with shutter) incl 4mm thick glass or stainless steel wiremesh (as required at site), without sash bar aluminium saction weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including frame 2mm thick/fittings complete all as per direction of Engr-in-charge. (Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates).
S&F powder coated aluminium window and ventilator shutters, side hung type/fixed type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) and frame of 2mm thick complete all as specified. (Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates).
S&F Sheet glass, 4 mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including beading fixed nails complete all as specified and directed
S&F in repair 18/19 mm veenered paticle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drowers, cupboard, partition including wooden/PVC lipping/beading on exp as required etc as directed by Engr-in-Charge
S&F Continuous( piano) hinges(width of flaps 40mm when open), mild steel , bright finish or electrogalvanised
S&F 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished
Preparation of old surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots.Complete removal of exisitng treatment on walls and ceiling complete all as specified and as directed.
Providing 1mm thick wall care putty on Wall and Ceiling complete all as specified and as directed.
M& L two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two Coats over wall and 1 coat over Ceiling complete all as specified and as directed.
S&F 50 mm dia High Density polyethylene pipes (HDPE) of pressure rating 6kg/cm2 to walls, ceilings or in floors etc. incl all fittings like bend, T section/Y section as required at each floor/Qtr for AC water outlet pipe complete all as specified and directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.
M&L cutting holes into or through brick wall built in cement mortar for holes for drain pipe & making good in CM 1:3 or PCC 1:2:4 superficial area n. exc 150 Sqcm complete all as specified and directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials taking credit and making good disturbed surfaces complete all as directed.
M&L for point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size and making good surface complete all as directed for the following :
One light point / fan point controlled by one 1-way switch/ bell push.
One socket outlet point 5 amps on the same board.
One socket outlet point 5 amps on the independent board.
All as per srl item No. 181 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire on the independent board
M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multistranded copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and with new modular box covered with new modular back plate and top cover for mounting switches, sockets or fan regulators etc for the following :-
One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch.
One socket outlet point 5 amps on the same board.
One socket outlet point 5 amps on the independent board.
All as per srl item No. 182 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire
S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed..
S&F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.
S&F Modular socket 16 Amp multipurpose shuttered type, 2 module size complete all as directed.
S&F Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Ampscomplete all as directed.
S & F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed..
S & F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.
S&F Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.
Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.
S&F In replacement ceiling fan 1200mm sweep, Copper winding,240 Volts. 50 Hz and depositing the old u/s to MES store yard complete all as specified.
Supply and fixing of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock depositing the old Geyser to MES store yard complete all as specifed and directed.
Supply and fixing Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections complete all as directed.
S & F energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.
Supply and fixing street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.
Taking down of exhaust fan any type, size complete with blades, and depositing to MES store yard complete all as specified and as directed.
Supply and fixing of exhaust fan 300 mm sweep metalic body type with blade, frame and louvers, making all electric connections complete all as directed
Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.
M&L for Sub main wiring with 2 run of 4 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.
S& F in replacement Static Energy Meter three phase electronic type with LCD display of capacity 10-60A including connection with seal and sealing wire and depositing old u/s meter to MES store yard complete all as specified and as directed
Supply and fixing wall light fitting comet type with and incl 9 watt LED lamp complete all as directed.
Supply and fixing in replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.
S & F in replacement of aluminium cable 1100 Volt grade, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat/circular of size 10 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.
All as per srl item No. 205 here-in-before but with 6.0 Sqmm ISI marked in service connections, including taking down old unserviceble cable complete all as directed.
S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed.
S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories complete including cutting chasis in soft soil and refilling complete ll as specified and and as directed.
S&F of MCB DB confirming to IP 43 - IK 09 with single door, SPN 02 way, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces. Make : Legrand/Siemens/Indoasian/Havells
Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. Make : L&T / Legrand Lexic/ Indoasian/Havells.
S&F Modular Bell push 6A 1 module complete all as directed.
S&F Modular Fan regulator step type, 120 watts, complete all as directed.
S&F Call bell ding dong type, AC, 230V complete all as directed.
S&F PVC batten holder with back plate all as specified and directed.
S&F Decorative wall mounted LED Light fitting all as specified and directed.
M&L in replacement of Sub main wiring with 2 run of 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 10.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.
M&L in replacement of Sub main wiring with 2 run of 6 .0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.- .
S&F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed..
S&F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.
S&F in replacement of MCB SPN10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed
M&L for taking down and refixing electronic energy meter three/single phase and refixing the same after new connection wiring with 10.0/6.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked complete all as specified and as directed.
S&F in replacement of MCCB Incommer Distribution Board double door loadline, TPN 4Way, 415V, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface/recess mounting, with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB’s as incommer and MCB's as outgoing etc and making all necessary connections complete all as directed.
S&F in repalcement of MCCB 3P 125 Amp with breaking capacity 16 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.
M&L for earthing complete with GI earth plate electrode 600 mmx 600mm x 6mm thick burried directly in ground not less than 2.25 mtrs below ground level, with top edge of the plate not less than 1.5 mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts check nuts to earth test point including necessary PCC 1:2:4 type B-1 pit, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20 mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and excavation complete all as directed.
Fabrication of machine pressed kitchen cupboards, cabinets, drawer, shelf, shutter etc made of 18mm thick BSB HDHMR board of front face glossy finish other action tesa or equivalent with nails and adhesive including Auto/ soft closing hinges (L Bihari hinges) complete all as specified and as directed by Engr-in-Charge.
aggarwal engineers contractors
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .