Cleaning and Repair/Replacement of RCC Roofs, GI/AC Sheet Roofs, Valley Gutters and Down Take Pipes of Production Shops and Non- Production Shops/Buildings at FGK.

Amount

Cleaning of Valley Gutters and Roof Sheets.

Cleaning of down takes pipes

Cleaning of RCC roof and Chajjas

Cleaning of storm sewer and connected open drains of GS-I.

Demolition of brick work built in cement mortar.

Demolition of cement concrete n exc. 15cm thick (unreinforced).

Dismantling of corrugated steel sheeting.

S/F of 0.8mm thick galvanised corrugated mild steel Sheeting with two corrugation side lap with all fittings and fastenings.

S/F of 0.8mm thick galvanised plain mild steel Sheeting in ridges with all fittings and fastenings.

S/F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. All the sheets shall have 28-32mm crests depth with 06 nos crest in one sheet (of 1m width) and 02 ribs within two crests for stiffning. Make- Tata/ JSW. Color shall be approved by EIC.

S/F Pre-painted galvalume aluminium zinc coating GI based plain steel ridge 0.50 mm thick of any colour having tensile strength of minimum 550 Mpa fixed with self tapping screws all as specified. Make- Tata/ JSW. Color shall be approved by EIC.

Dismantling of Asbestos cement (corrugated or semicorrugated, etc.) sheets.

S/F of 6mm thick AC Sheets corrugated or semi corrugated, including all fittings and fastenings.

S/F of 6mm thick AC ridge or curved Sheets for the top of north light glasses, corrugated or semi corrugated including all fittings and fastenings.

Dismantling of structural steel work such as valley gutter, wind tie, purlins, flats, etc.

Taking down CI rain water pipe any size includding fittings.

S & F of MS work as in plates, angles, channels for purlins, trusses, valley gutters etc.

S/F 6.4mm thick rough cast wired glassfixed with oil putty/silicon gel not exc. 0.5 sqm.

S/F 150mm dia PVC SWR pipe socketed & jointed with cement solvent jointer & accessories. Make- Supreme/Prince/Finolex.

S/F PVC SWR bend / shoe for 150mm dia PVC pipe. Make- Supreme/Prince/Finolex..

M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar.

Taking down of cement plaster on brick wall includig taking out joints, hacking for key, scrubbing down with water etc. alongwith brushing with neat cement slurry @ 3 Kg of cement per Sqm and Rendering 15mm thick on fair faces of brick work or concrete surfaces with 1:4 cement plaster and surface to be finished even and smooth (without using extra cement)

Providing PCC type A-1, 1:1.5:3 (20 mm graded aggregate) & surface to be finished even & smooth with using extra cement.

Preparation of new painted steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss).

Providing two coats of cement paint on one coat of primer.

Taking down old tar felt/bitument paint.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers/PU having Sun Reflectivity Index (SRI) of 105 or more on top of concrete roof in 3 coats @ 10.76 litre per 10 square meter. One coat of self - priming elastomeric waterproofing liquid (dilution with water in the ratio of 3:1 i.e.3 parts of waterproofing liquid and 1 part of water) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer in Charge. Make:- Asian/Nerolac/Dr.Fixit. Firm i.e.Contractor (not OEM) will provide minimum 6 years warranty of the above system and will carry out any repair free of cost if leakage or seepage is found through the above applied system.

Supply & Fixing of 24 inch aluminium spherical vane design heavy duty wind turbine, 42 vanes, neck and throught diameter 610mm, Al 0.5mm thick, Alloy 8011, FRP base 1.5 to 2mm

Structural steel (credit material).

CI pipe (credit material).

Old AC sheet (credit material).

Plain/Corrugated steel sheeting (credit material).

M/S NEELAM ENTERPRISES

Talson Builders

M/s Raghvendra Traders