Power supply to Cancer Hospital at PRM MCH Baripada (Substation Part) for the year 2025-26.

Technical specifications of all the equipments and materials should be approved from SE (Electrical) R&B Circle prior to procurement. 33 KV UG Line using HDD Supply & Laying of 33 KV 1C x 630sqmm Aluminum XLPE Armoured cable using HDD method as per specification mentioned in the DTCN.

Supply & fixing of 33KV Outdoor end termination kit for 1C x 630sqmm XLPE cable as per specification mentioned in the DTCN.

Supply & fixing of 33KV straight through jointing kit for 1C x 630sqmm XLPE cable as per specification mentioned in the DTCN.

Supply & fixing of 33KV Indoor end termination/jointing kit for 1 C x 630sqmm XLPE cable as per specification mentioned in the DTCN.

Supply & fixing of GI Flat 50X6mm for XLPE cable earthing as per specification mentioned in the DTCN.

33 KV Cable termination after RMU Supply & erection of 11 mtr RS Joist Pole 150mm x 150mm, 34.6 Kg/mtr for cable termination DP from incomming overhead feeder. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.

Supply & erection of 232 sqmm AAAC for 33 KV line for tapping on incomming feeder

Supply & fixing of MS Channel 100x50x6mm

Supply & fixing of MS Channel 75x40x6mm

Supply & fixing of MS Angle 50x50x6mm

Supply & fixing of Fish Plate 50x6mm

Supply & fixing of GI Flat 50x6mm

Supply & fixing of GI Flat 50x6mm for earthing

Supply & fixing of 33 KV Lightning Arrestor

Supply & fixing of 33KV Disc Insulator (B & S), Polymer

Supply & fixing of 33KV H/W Fitting (B & S type) for Disc Insulator

Supply & fixing of 33KV Pin Insulator

Supply & fixing of PG Clamp for 232Sqmm AAAC

Supply & fixing of HT Stay set complete

Supply & fixing of HT Stay Insulator

Supply & fixing of HT Stay Clamp

Supply & fixing of 7/10 SWG GI wire for stay

Supply & fixing of 40mm nominal bore GI Pipe earthing device

Supply & fixing of Pipe HDPE(25 mm)

Supply & fixing of GI Nuts Bolt & Washer

Supply & fixing of GI Barbed wire for anticlimbing

Supply & fixing of Danger Plate

Supply of MS materials for fabrication & galvanisation

33KV 4 Pole with 2 Nos Isolators- 1 Nos Supply & erection of 11 mtr RS Joist Pole 150mm x 150mm, 34.6 Kg/mtr for cable termination DP from incomming overhead feeder. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.

Supply & erection of 33 KV 800 AMP Double break (Turn & twist center rotating) isolator without earth switch with PI(Polymer) to be fixed on 4 pole structure at one of the incoming feeder. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.

Supply & erection of 232 sqmm AAAC for 33 KV line for tapping on incoming feeder

Top Channel 100x50x6mm

Belting Channel 75x40x6mm

Bracing Angle 50x50x6mm

Fish Plate 50x6mm

GI Flat 50x6mm

GI Flat 50x6mm for EARTHING

33 KV Disc Insulator (B & S), Polymer

33 KV H/W Fitting (B & S type) for Disc Insulator

PG Clamp for 232 Sqmm AAAC

33 KV Pin Insulator, Polymer

HT Stay set complete

HT Stay Insulator

HT Stay Clamp

7/10 SWG GI wire for stay

40mm nominal bore GI Pipe earthing device

Aluminium Socket 120 mm

G.I. Nuts, bolt & Washer

GI Barbered wire for anticlimbing

Danger Plate

Fabrication & Galvanisation

33KV RMU with XLPE CABLE Design, Manufacturing, Supply, Installation,Testing and commisioning of Outdoor type (IP55) 33KV HT 4 way Ring main unit (RMU) with Full DAS as per the CEA/CEIG/EB DEPARTMENT requirements comprising of the following: 2 Nos. 33KV, 630A,21kA for 3 sec Motorized Vacuum Circuit Breaker, Horizontal Fixed, Horizontally Isolated with all standard accessories with self-powered overcurrent, earthfault and numerical feeder protection relay and fault passage indicator, power supply of 24 V DC from battery charger and 230 V AC from Auxillary PT will be in the scope of supplier. 2 Nos. 33KV, 630A,21kA for 3 sec Motorized Load Break Isolator, Horizontal Fixed, Horizontally Isolated with all standard accessories. Complete with protection CT and PT, Indication Lamps, Aluminium Busbars, Earthing, etc., The panel shall be erected using necessary accessories all complete as required by local electrical department and properly grouted to the plinth with all accesories required for grouting.Make-Siemens,Schneider,ABB

Supply of Standard FRTU with networking Equipment and other accessories for 4 way RMU.

40mm nominal bore GI Pipe earthing device

33/0.4 KV DTR S.I.T.C of 1250 KVA, 33/0.4 KV distribution transformer confirming to IS 1180 Level-2, ONAN, DYN11, Copper wound with On-load tap changer, LT extension box, provision of RTCC panel, OTI, WTI as per direction of Engineer in-charge. Transformer shall be provided with 4 uni-directional roller with locking arrangement suitable for movement of transformer in either direction. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.Make- Kirloskar/OTPL/Alpha/OEU/CG

Supply and laying of 12 corex1.5 sqmm copper armoured control cable as per the direction of Engineer-incharge.Make-Polycab/KEI/Finolex/RR Kabel/Gloster/Havells

Supply & erection of mtr 6 RS Joist Pole (13 Kg/mtr) as per for mounting of outdoor VCB and accesories as per direction of engineer in-charge.

Supply & stringing of 100sqmm AAA Conductor as per direction of engineer in-charge.

Supply & fixing of MS Channel 100x50x6mm

Supply & fixing of MS Channel 75x40x6mm

Supply & fixing of 33 KV Lightning Arrestor

Supply & fixing of Fish Plate 50x6mm

Supply & laying of GI Flat 50x6mm

Supply & laying of GI Flat 50x6mm for EARTHING

Supply & fixing of PG Clamp for 100 Sqmm AAAC

Supply & fixing of 33 KV Pin Insulator, Polymer

Supply & laying of GI pipe riser (110 mm) (4nos x 6Mtr)

Supply & fixing of 40mm nominal bore GI Pipe earthing device for earth connection

Supply & fixing of Aluminium Socket 120 mm

Supply & fixing of G.I. Nuts, bolt & Washer

Supply & fixing of GI Barbered wire for anticlimbing

Supply & fixing of Danger Plate

Supply of MS materials for fabrication & galvanisation

LT ACB & LT XLPE Cable S.I.T.C of OUTDOOR LT A.C.B (2000 Amp) panel with 4P 2000A EDO TYPE ACB Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.), Busbar provision for 2000 A for connection of 630 sqmm 4 run cable in the incomer, 7 nos. 300 sqmm 3.5 core cable in the outgoing busbar (Make- Schneider(NW)/ ABB (E max 2 )/ Siemens (3WT)/ Legrand(DMX3), confirming to IS/IEC 60947-part1 & part2. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.

LT ACB & LT XLPE Cable S.I.T.C of OUTDOOR LT A.C.B (2000 Amp) panel with 4P 2000A EDO TYPE ACB Micro Processer Based with Breaking capacity - Icu= Ics= Icw= 50kA for 1 sec having LSING Protection with Display-Current Metering with Last Trip Record Data. (Communication with On & Off Status indication for Remote Closing and Opening operation of breakers through Modbus RS485 protocol and uploading breaker status to Users Computer/SCADA.), Busbar provision for 2000 A for connection of 630 sqmm 4 run cable in the incomer, 7 nos. 300 sqmm 3.5 core cable in the outgoing busbar and 1 no. 400A, 4P, 36kA with adjustable Micro processor Release with Ics=100% Icu. ( Make of MCCB- Legrand-DPX3 / Siemens-3VA Model/ Schneider- CVS/ ABB Formula) (Make of ACB- Schneider(NW)/ ABB (E max 2 )/ Siemens (3WT)/ Legrand(DMX3), confirming to IS/IEC 60947-part1 & part2. The detail specification & G.T.P to be followed as per specification mentioned in the DTCN mentioned in the D.T.C.N.

Supply & laying of LT 1.1KV aluminum armoured XLPE Cable, 1Cx630sqmm from transformer to LT A.C.B

Supply & fixing of Gland for arm 1C x 630sqmm XLPE Cable

Supply & termination of Al Cable Socket for 630sqmm XLPE cable

Supply & laying of GI Flat 50x6mm for earthing

Supply & fixing of 40mm nominal bore GI Pipe earthing device for earth connection

Supply & fixing of G.I. Nuts, bolt & Washer

Route marker: Supply and installation of cable route marker including transportation from site/tent, excavation, refilling, disposing of malba, flooding with water, ramming/compacting of foundation as per TPNODL specification (Civil works for 33 Kv UG Cabling works)

Cupping of pole (Including supply of materials) (Civil works for 33 Kv DP for cable termination)

Concrete materials for stay anchor plate. (Including supply of materials) (Civil works for 33 Kv DP for cable termination)

Earthing Pit for GI Pipe Earthing (Including supply of materials) (Civil works for 33 Kv DP for cable termination)

Concrete materials for stay anchor plate. (Including supply of materials) (Civil works for 33 Kv DP with two nos. isolator)

Cupping of pole (Including supply of materials) (Civil works for 33 Kv DP with two nos. isolator)

Earthing Pit for Pipe earthing (Civil works for 33 Kv DP with two nos. isolator)

Cubical Control Room including Blower, Exahust fan, Cubicle foundation etc (Civil works for 33 Kv Cubicle indoor)

Earthing Pit for Pipe earthing (Civil works for 33 Kv Cubicle indoor)

Earthing pit for Pipe Earthing(Civil works for 33 Kv RMU)

Earthing Pit for Pipe earthing (Civil works for LT ACB)

Cupping of pole (Including supply of materials) (Civil works for 33 Kv Line shifting)

Concrete materials for stay anchor plate. (Civil works for 33 Kv Line shifting)

Earthing Pit for Pipe earthing (Civil works for Distribution Transformer)

Inspection fee for 33KV line for 1st KM UG

Inspection fee for drawing approval(G)

Inspection fee for Transformer (H)

SITC of out door 800A VCB, 21.6 Ka, 33kV with indoor CR Panel for Transformer protection .The cost is inclusive of civil foundation.Make-Siemens/Schneider/ABB

Please Enable Macros to View BoQ information