Construction and repair of drain, cross, c.c. road, Interlocking and supply and fixing of gym equipment in ward 33

Amount

Supply and installation of Multi station Gym - 3 weight lines including all accessory as per direction of engineering in charge.

Supply and installation of 9 station Multi gym land finess exercise muscle machine multi function cable jungle including all accessory as per direction of engineering in charge.

PROVIDING AND FIXING CHEST PRESS including filling and FIXTURES, CIVIL WORKS AND REQUIRED SAND PIT FILLED WITH APPROVED SAND WORK TO BE DONE AS PER THE INSTRUCTION OF ENGINEER INCHARGE AND SPECIFICATION GIVEN BELOW DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height). SAFE AREA: - 3.0Mtr x 1.7Mtr. Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The center pipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S.angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0.7 thickness. Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material. Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust.The bearings used are of “6205zz” & “6203zz” permanent lubricated sealed bearing of reputed brand High tensile steel with galvanized nuts & bolts are used for assembly. The cerclips used for locking is made up of A24 mm & A16mm. The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. Includes as The cost/unit ie. Rate include basic item cost 12.5% Excise and 5% CSt, Transportation & Fitting charges transit insurance.

Bidder Name

Amount

Sh. Kanhaiya Lal Tank

JAMNALLAL TAK

vijay kumar pahadiya

MAA CONSTRUCTION

Sanwariya Construction company Contractor

Kass Kelikam LLP

Sh. Kanhaiya Lal Tank

MAA CONSTRUCTION

Sanwariya Construction company Contractor

vijay kumar pahadiya

JAMNALLAL TAK

vijay kumar pahadiya

Kass Kelikam LLP

Sh. Kanhaiya Lal Tank

Sanwariya Construction company Contractor

JAMNALLAL TAK