REPAIR MAINT OF RACK RECORD TRESTEL STORE ROOM REPLACEMENT OF CUSHION OF CHAIR DINING OFFRS REPAIR OF BENCH WORKSHOP TABLE COMPUTER BED STEEL MAT CHARPOY IP HARD TOP AND REPAIR OF LEG OF ALMIRAH LARGE ALMIRAH SMALL AT AKHNOOR UNDER GE NORTH AKHNOOR

Amount

Rack for Record 6'x 2'x6' (WDF-42) Dismantling of old US legs of Rack for record and S&F new legs made out of 1st class hard wood shisham made to shape and size and making wrought and complete all as specified and directed.

Dismantling of old US shelf of Rack record and S&F new shelf made out of 1st class hard wood shisham made to shape and size and making wrought and complete all as specified and directed.

Trestle store room wooden FD-86(M) Removing of old UNSV broken long battens after taking down from trestle room wooden and supply and fixing of battens of size 2.44mmx10cmx10 cm made of well seasoned shesham wood. The fixing shall be done with standard workmanship.The edges shall be rounded with file/abrassive paper, complete all as specified and as directed by Engr-in-charge Drg No FD 86(M).

All as per item No 2 here in before but for centre battens (stiffners) of size 2.04mx6cmx10cm Drg No FD 86(M)

All as per item No 2 here in before but for shorts battens (stiffiners) of size 60cmx6cmx10cm Drg No FD 86(M)

All as per item No 2 here in before but for legs of size 40.5cmx10cmx10cm Drg No- 86(M).

Use creosote oil two coat internally/externally on trestle store room rest all as specified and directed by engr-in-charge Drg No FD 86(M).

Chair Dining JCOs (FD/MAP-II/05) S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly plannted and finished as shown on drawing complete all as specified and directed:-

Rear Legs

Front Legs

Replacement of PVC Sheet

Bottom Stiffener

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame(4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

Chair Dining Offr FD/E6/MAP/15(R) S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly plannted and finished as shown on drawing complete all as specified and directed:-

Rear Legs

Front Legs

Side rail of seat frame

Front/back rails of seat frame

Foam coushioned of 75mm,40density with fabric on seat of 12mm thick ply

Bottom Stiffener

Vertical back stiffener

Nylon buffers on the bottam of legs

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame(4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

Bench Workshop Steel (FD-43) Taking down old U/S top of bench workshop steel and new top of 40mm thick 2nd class hard wood with three coats of oil paints complete all as specified and directed.

Removing of old UNSV drawer and S&F of new drawer made of 1 mm thick MS sheet with coat of red primer incl preparation of new steel surface complete all as specified and directed.

Taking down old U/S long rail of bench workshop steel and S&F new long rail 32x32mm Sq tube made of 16 gauge PBI sheet fixed by gas welding incl painting with a coat of red oxide primer incl preparation of new steel surfaces complete all as specified and directed.

All as per item No-5.2 above but short rails

All as per item No-5.2 above but stiffner

All As per item No-5.2 above but legs

Taking down old U/S PVC/Rubber shoes and S&F new Rubber/PVC shoes at the bottom of leg.

M&L for painting with two coat of synthetic enamel paint over old painted/new surfaces incl preparation of old steel surfaces complete all as specified and directed.

Bed Hard Steel FD/E6/MAP/08(R) Removal of old U/S plywood from bed hard steel and S&F in repairs 12mm thick ply wood top of size 1950mmx900mm (Single piece) BWR Grade ISI mark with MS screws, complete all as specified an directed by Engr-in-charge.

Removal of old U/S pre-laminated partical board head side from bed hard steel and S&F in repairs 18mm thick pre-laminated parical head side with MS Screws,complete all as specified and directed by Engr-in-charge.

Removal of old U/S pre-laminated partical board foot side from bed steel and S&F in repair 18mm thick pre-laminted partical board foot side with MS screws,complete all as specified and directed by Engr-in-charge.

Taking down old U/S PVC/Rubber shoes and S&F new Rubber/PVC Shoes at the bottom of leg.

M&L for painting with two coat of synthetic enamel black paint over old painted/new surfaces incl preparation of old steel surfaces complete all sa specified and directed.

Charpoy IP with Hard Ply Top ( FD/MAP-II/01 ) Removal of old plywood from charpoy IP with plytop and S&F in repair 12 mm thick plywood top of size 1950mmx900mm (Single piece) BWR Grade ISI mark with MS nuts & screws complete all as specified and directed by Engr-in-charge.

Taking down old U/S PVC/Rubber shoes and S&F new Rubber/PVC shoes at the bottom of legs.

M&L for painting with two coat of synthetic enamel black paint over old painted new surfaces incl preparation of old steel surfaces complete all as specified and directed.

ALMIRAH MED/LARGE STEEL (FD-1031/1032) Unserviceable existing Legs from Almirah Med /Large Steel and provide new approved quality Legs and fixed in position complete all as specified and directed by Engr -in-charge.

Table Computer (FD/E6/MAP/03) Taking down old U/S top of table 3'x2' and S&F new top of 12 mm thick light Dark/Brown enginering wood MDF board complete all as specified and directed.

Removing of old U/S front side of drawer and S&F new front side 12mm thick light Dark/brown engineering wood MDF board complete all as specified and directed.

Removing of old MS channel of drawer and S&F of new MS chanel of drawer complete and all as specified and directed.

M&L for painting with two coat of synthetic enamel with paint over old painted new surfaces incl preparation of old steel surfaces.

PUSHPAK INDUSTRIES

VEE KAY IND