Repair to 100000 GPH x 40 meter head HC pump set installed at pumping station Salmay stage-0 (Old) alongwith allied works.

Repair to 100000 GPH x 40 meter head HC pump set installed at pumping station Salmay stage-0 (Old) alongwith allied works by way of decoupling of pump from motor, dismantling of pump set, carriage of pump motor set from pumping station to road side by head load carriage and then to workshop by mechanical transport dismantling of pump motor sets. Providing, fabrication and fitting of new pump shaft SS as per sample. turning and finishing for exact bearing size, fabrication and fitting of shaft protection sleeves SS two nos. at driving end and non driving end, providing and fitting of bearing 02 nos. at NDE and DE 6212 and 312. Repair to impellers by turning and brazing. Providing and fitting of bearing as per sample. Repair to suction / delivery body casing by way of drilling and tapping, fitting of new studs with nuts. Providing, fabrication and fitting of new coupling pulley set, bolts, with nuts and rubber bushes. Testing at site on full load after fitting at base frame. Complete job includes cost of material and labour charges including to and fro shifting charges. Rebate, if any, quoted by the firm separately.