REPAIR / MAINT OF E/M WORKS FOR OTM AND MD ACCN AT NCC OTA UNDER GE GWALIOR

Amount

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete all as specified and directed for the following :-

One light point controlled by one switch.

One Ceiling fan point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 3 pin socket outlet 5 Amps controlled with one switch on the same board.

One 3 pin socket outlet 5 Amp controlled by one switch on independent board.

One bell point controlled by one bell push

Description all as per item no. 2 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed.

S&F Modular switch 1 way 6 A,1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F electronic step rotary type fan regulator of two module capacity upto 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F bell push flush type Modular, 5 Amps complete all as specified and directed.

S&F new modular White cover plate with frame but 2 module complete all as specified and directed

-do- but 3 module White cover plate with frame

-do- but 6/8 module White cover plate with frame

-do- but 12 module White cover plate with frame

S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified and directed

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed

S&F LED Lamp 9/10 watt with 5 star rating complete all as specified and directed

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S&F switch piano, flush button single pole one way 5 Amp complete in repair including taking down old u/s switch complete all as specified and directed.

S&F Switch socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete in repair including taking down old u/s socket outlet complete all as specified and directed.

S&F switch piano, flush button single pole one way 15 Amp complete in repair including taking down old u/s switch complete all as specified and directed

S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete in repair including taking down old u/s socket outlet complete all as specified and directed

S&F in renewal bell push flush type, 5 Amps complete complete all as specified and directed.

S&F in renewal of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F in renewal Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified and directed.

S&F in renewal electronic modular step rotary type fan regulator of capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.

S&F in renewal Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F in renewal LED Lamp 12 watt with 5 Star Rating complete all as specified and directed

S&F in renewal Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed

S&F in renewal Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed

Supply & Fix in renewal of Modular Switch 6 Amp one way complete all as specified and directed

Supply & Fix i in renewal of Modular socket 6 Amp 3pin complete all as specified and directed

Supply& Fix in renewal of Modular Switch 16 Amp one way complete all as specified and directed

Supply & Fix in renewal of Modular socket 6/16 Amp 3pin complete all as specified and directed

Supply & Fix in renewal of Modular Step fan Regulator of 1/2 Module upto 120 Watt complete all as specified and directed

Supply & Fix in renewal of Modular white colour plate with frame 2 module complete all as specified and directed

Supply & Fix in renewal of Modular white colour plate with frame 3 module complete all as specified and directed

Supply & Fix in renewal of Modular white colour plate with frame 4 module complete all as specified and directed

Supply & Fix in renewal of Modular white colour plate with frame 6 module complete all as specified and directed

Supply & Fix in renewal of Modular white colour plate with frame 8/10/12 module complete all as specified and directed

S&F in renewal of 20 watt Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 4000K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed

S & F in renewal of 35/36 watt, LED luminaire 600 mm x 600 mm , 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed

S & F in renewal of 70W LED street light fitting ,230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F in renewal of 100 watt LED flood light 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp IP66 protection complete all as specified and directed

M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 1.5 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 20 mm width dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 1.5 Sqmm FRLSH earth continuty wire complete all as specified and directed

M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 20 mm width dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH earth continuty wire complete all as specified and directed

M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 25 mm width dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 4 Sqmm FRLSH earth continuty wire complete all as specified and directed

M&L in renewal sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm two single core PVC insulated unsheathed FRLSH wire drawn in and including 25 mm width dia PVC Casing Caping medium grade including one run single core PVC insulated unsheathed 6 Sqmm FRLSH earth continuty wire complete all as specified and directed

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq.mm x 2 Core complete all as specified and directed

Supply and fix condenser of 2.5 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed.

Supply and fix condenser of 3.15/ 04 MFD capacity after removing existing unsv condenser from any situation complete all as specified and directed.

M&L for servicing of AC of any capacity including air filter cleaning,condenser and evaporator coil cleaning,insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for implastiised PVC pipe medium duly 20mm dia for draining out condensed water complete all as specified and directed

Dismantling and taking out the existing old unserviceable compressor hermetically/rotary sealed unit of any make from split type AC and S&F New compressor suitable for split AC of capacity 1.5 Ton complete all as specified and directed.

Dismantling and taking out the existing old unserviceable compressor hermetically/rotary sealed unit of any make from split/window type AC and S&F New compressor suitable for split/window AC of capacity upto 2 Ton complete all as specified and directed.

S&F PCB Circuit with remote control suitable for any make and capacity of 1.5/2 Ton split/window type AC complete all as specified and directed

M&L for in renewal of damaged insulation of size 1/4&3/8 for split AC complete as per existing site complete all as specified and directed.

M&L for in renewal of damaged insulation of size 1/2&5/8 for split AC complete as per existing site complete all as specified and directed.

M&L for in renewal of copper tube of size 3/8 & 5/8 suitable for any type and any capacity Air conditioner complete all as specified and directed.

M&L for Refrigerant gas R-22/R-32 for Topping up in Air conditioner size of 1.5/2 Ton complete all as specified and directed

M&L for Refrigerant gas R-410(a) for Topping up in Air conditioner size of 1.5/2 Ton complete all as specified and directed

S&F in renewal sheet metal Enclosure with socket Plug top and earth plug, single pole and neutral with single pole MCB 20 Amps 240 volts complete all as specified and directed

Taking down the water heater storage type of any make upto 50 ltrs capacity.Dismantling carefully from its position fixed on walls,descaling the inner tank,flange assembly by applying descaling solution,reassembling the same, after renewal of defective parts and reinstalling to their original location locations or as directed after commissioning and testing complete all as specified and directed. Note : Any material/part found UNSV during servicing shall be renewal by the contractor and measured and paid separately under respective items.

Taking down the water heater for rectification of leakage in the inner shell of (Geyser)storage type of any make upto 50 ltrs capacity. Dismantling carefully from its position fixed on walls,and rectified leakage by soldering,brazing,welding at appropriate area of copper/ stainless steel inner tank of geyser and reinstalling to their original location or complete all as specified and directed. Note : Any material/part found UNSV during servicing shall be renewal by the contractor and measured and paid separately under respective items .

S&F in renewal of unsv neon indicating lamp,rectangular/round as required at site complete all as specified and directed

S&F in renewal of unsv heating element 2 KW,single phase,230 volt with triangular/round base as suitable for 35/50 Ltr water heater complete all as specified and directed.

S&F in renewal of thermostat switch range upto 80"C suitable for 25 to 50 ltrs cap water heater complete all as specified and directed

S&F in renewal PVC Connection of any make with(ISI Mark) having 10 mm dia,60cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 nos of unions/cup shaped cover with washers complete all as specified and directed

S&F in renewal of u/s PVC Connection of any make with(ISI Mark) having 10 mm dia,80cm long with steel reinforcement suitable for cold water geyser outlet supply with 02 nos of unions/cup shaped cover with washers complete all as specified and directed

S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA and 12 Nos MCB SP 40 amp complete with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match complete all as specified and directed

S&F in renewal MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F in renewal MCB SPN 32Amps to 40 Amps, 240 volts 'C' series 16 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F in renewal MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 95 Sqmm 3.5 Core complete all as specified and directed.

-do- but 50 Sqmm 3.5 core.

-do- but 35 Sqmm 3.5 core.

-do- but 25 Sqmm 3.5 core.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed

Supplying and laying un reinforced precast concrete cable cover Class LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed.

S&F 4 POLE MCCB 400 Amp, 50Hz ,415V with rupturing capacity 36 KA in repaircomplete all as specified and directed

S&F 4 POLE MCCB 250 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified and directed

S&F 4 POLE MCCB 160 Amp, 50Hz ,415V with rupturing capacity 36 KA in repair complete all as specified and directed.

S&F 4 POLE MCCB 125 Amp, 50Hz ,415V with rupturing capacity 16 KA in repair complete all as specified and directed

S&F 4 POLE MCCB 100 Amp, 50Hz ,415V with rupturing capacity 16 KA in repair complete all as specified and directed.

S&F 4 POLE MCCB 63 Amp, 50Hz ,415V with rupturing capacity 16 KA in repair complete all as specified and directed

Taking out old defective burnout motor of capacity of 10 HP, 3 phase, 440 V, 50 Hz from foundation and transfer it to workshop for rewinding with super enamelled copper wire of existing size & gauge and replacement of DE & NDE bearing so as to match the manufacturers original specification and refitting the same, testing and commissioning complete all as specified and directed.

Supply and fixing in renewal post top lantern LED type 20 watt 230 watt volts AC outdoor type as gate light with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including fixing on 40 mm light grade GI pipe of hight 2 meter complete all as specified and directed

S&F in renewal Solar Garden light 2.5 ft Height including all accesseries complete all as specified and directed.

M & L in renewal Solar water heater including replacing (if unsv) any other parts of Solar Water heater as and when required complete all as specified and directed

M & L in renewal Electric Solar Pannel including replacing (if unsv) any other parts of Solar Pannel as and when required complete all as specified and directed

M & L for GI pipe Med grade of 100 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed

M & L for GI pipe Med grade of 50 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed.

M & L for GI pipe Med grade of 25mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed

M & L for GI pipe Med grade of 20mm dia,with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed

S & F of Sluice valve size of 100mm including replacement of gland packing,flunge packing,shaft and thread coller complete all as specified and directed

S&F 50 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts complete all as specified and directed

All as per item No 98 but of size 25 mm

All as per item No 98 but of size 20 mm

Supply & fix in renewal Led 30 Watts Indoor Ceiling Spot Light/Focus Light/Track Light (White),Flexibly Rotatable Light Head in repair complete all as specified and directed.

Supply & fix in renewal Air Circulation Exhaust fans 230 volts single phase oscillating 300 mm sweep complete all as specified and directed.

Supply & fix in renewal Wall fans 230 volts single phase oscillating 300 mm sweep suitable for wall mounting complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normalground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point and connect green wire for earthing all as specified including testing on completion complete all as specified and directed

M & L for servicing of DG set of 20KVA including replacement of all consumable parts i.e Engine oil as per the manufacturers recommendation spinion lube oil filter, Fuel filter element primary, fuel filter element secondary, primary element, Coolent premix in and all other essential parts required such as fuel level indicator, lub oil pressure sensor, temperature sensor, overload sensor and all other sensors and gauges with soft touch buttons at site, incl servicing of alternator and lubricating, renewal of unsv leads required for battery, complete checking and renewal (if unsv) any other parts of DG set as and when required complete all as specified and directed. Note : Necessary servicing will be carried out from authorised rep of Manufacturers.

M & L for servicing of DG set of 30KVA including replacement of all consumable parts i.e Engine oil as per the manufacturers recommendation spinion lube oil filter, Fuel filter element primary, fuel filter element secondary, primary element, Coolent premix and all other essential parts required such as fuel level indicator, lub oil pressure sensor, temperature sensor, overload sensor and all other sensors and gauges with soft touch buttons at site, incl servicing of alternator and lubricating, replacement of unsv leads required for battery, complete checking and renewal (if unsv) any other parts of DG set as and when required complete all as specified and directed. Note : Necessary servicing will be carried out from authorised rep of Manufacturers.

Supply and fixing in renewal AMF Panel suitable for existing 20 KVA DG Set three phase with bypass arrangement with change over switch complete all as specified and directed

Supply and fixing in renewal AMF Panel suitable for existing 30 KVA DG Set three phase with bypass arrangement with change over switch complete all as specified and directed

S&F in renewal Battery of 12V with 75 AH for DG set complete all as specified and directed.

S&F in renewal fully automatic star delta starter suitable for upto 2 x 12.5 HP Centrifugal Pump Set Motor 415 volts 50 Hz Panel Mounting complete with contactor and suitable thermal relay complete all as specified and directed

S&F power contactor for star delta starter upto 12.5 hp motor complete all as specified and directed

S&F Thermal Relay for star delta starter upto 12.5 hp motor complete all as specified and directed

S&F Stequa 411 AE Refill Set of 25 Tablet for Stequa Dosing System complete all as specified and directed

Supply and fix LED curb stone light ( RED,Yellow, Blue ,White , Amber,Green) fittings of length 500mm, height 200mm and width 150mm, with curb angle 45 degree, operatind voltage 36 volts DC power supply, having foundation hight 40mm, foundation width 20 mm, foundation stand hole 10 mm dia with 2 Nos of foundation rod having 8 mm dia to make curb stone theft proof and immoval,with load cayying / bearing capacity uoto 800 Kgs , in each curb stone LED strip lenght 465mm , Nos of LED in each strip 22, power consumption 2.34W per curb stone having one connectors with 2 Nos (1 male & 1 Female) with 2 core wire, Comlete all as specified and directed.

Material and labour for two coats of white snowcem on LT/HT PCC pole including two coat of black paint on all steel surfaces such as channels, angles, clamps, nuts, bolts and washers of any description and writing the pole number in black colour on yellow background at a suitable place on the pole including applying two coats of snowcem on PCC coping of pole complete all as specified and directed.

S&F LED Tricolor (Orange/White/Green) 3 in 1 Tiranga Single Strip Light with 18 Meter length,LED Decorative Pole Lighting Etc-Pack of 1,IP 65 rating withstand harsh weather poof complete all as specified and directed.

S&F Ceiling Mount Microwave Motion Sensor automatic On/Off Radar Occupancy Detector with Lux Sensor incl connection of bathroom light and exhaust fan complete all as specified and directed.

Supply and fixing Tiranga ( 20 W ) Tube light, 4 Feet 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size for connection complete all as specified and directed

Taking down unsv ceiling fans 1200/1400 sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding(Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed. Note :(i)Rewinding of fans should be measure and paid separately under appropriate items of schedule(ii) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site

Taking out burnt winding wire from ceiling fans(Which req rewinding) Motor of 1200 mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed. Note :(i) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items as below (ii) Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.

Taking down unsv Exhaust Fan 230/300/380/450 mm sweep 230v,AC supply,single phase from site,depositing in MES store Yard,dismantling all parts,checing serviceability of all parts & continuity of copper winding(Burn out winding fan should be staking aside for rewinding) including cleaning all the components of fan, oiling ,greesing,including replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shafts,capacitor,clamps etc as requried,reassembling the fan and testing complete all as specified and directed. Note :(i) Rewinding of fans should be measure and paid separately under appropriate items of schedule. (ii) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items. (iii) Testing should be done to repaired fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.

Taking out burnt winding wire from Exhaust fans(Which req rewinding) Motor of 230/300/380/450mm sweep 230V AC supply,single phase,Transporting to contractor workshop for rewinding the same with super enameled copper winding wire of existing gauge/turns & sixe throughly cleaning all the components of fan, oiling,greesing,replacement of rusted/unsv nuts,bolts split pin rubber reel,machine screws,shaft etc as required reassembling the fan,testing complete & Transporting back to MES Yard complete all as specified and directed. Note :(i) Major parts like fan capacitor,clamps with rubber real etc measured and paid separately as supply only items as below (ii) Testing should be done to repair fan minimum 24 Hrs continues running in MES store yard before fixing at site complete.

Supply only in renewal of ball bearing(6203&6204) Suitable for Exhaust fan/Air circulator fan of any size complete all as specified and directed.

Supply only in renewal of ball bearing(6201&6202) Suitable for Ceiling fan of any size complete all as specified and directed.

M/s Bansal Brothers and Co. (BID ID -3518926)

M/s Shanti Enterprises (BID ID -3522406)

Jai Mahakaal Construction (BID ID -3522404)