WBPWD/AE/BMCESD/NIeQ-08/25-26 (2nd Call)

Disribution Wiring:- S&drawing 1.1 kv single core stranded FR PVC insulated &unsheated single core stranded cupper wire (Make:-Polycab/Havells/RR Kabel)of the following sizes prelaid poly pipe. & by the Gifish wire & making necy connection as required. i) 2X 56/0.3( 4 sqmm) + 1 X 36/0.3( 2.5 sqmm) as ECC ( From HTPN DB to Power Plug/AC )(E-9/C-1,V)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision mms Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. a) 20 mm size (E-16/7- ( a ))

b) 25 mm size(E-16/7- ( b )

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. i. 2.5 sq.mm.(F-5/9-i)

ii. 4 sq.mm.(F-5/9-ii)

EI work for AC:-Supply & Fixing 240 V, 25 A, Modular type starter (Make:-Anchor Roma/ Legrand /Cabtree) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(E-19/17)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make:-Anchor Roma /Legrand /Cabtree), and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. (E-17/5-a)

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Make:-Anchor Roma /Legrand /Cabtree) & necy. Connections.(E-17/5-b)

Supply of 240 V timer DB with suitable size sheet steel enclose double door, phosphatised powder coated, neutral bar , din rail with IP-43 protection comprised with 1 no. 32A DP MCB (‘C’ Curve, 10KA), 1 no. 24 hours Analog programmable timer switch (min 15 min interval setting) and 2 no. 32A AC-3 power contactor, 2 no. out going stud complete with internal wiring by 1.1 kV grade 4 sq mm. FR PVC insulated copper wire incl. 2 no auto /manual by pass troggle switch and provision for earthing attachment incl. 4 nos LED indicating light for running condition with locking arrangement (for controlling 2 nos AC machine alternatively) [Make:- L&T /Cabtree/Siemens]

Power Distribution board :-Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. a) 6 way Enclosure (607716)(D-10/14) (Mk.-Legrand/Schneider/Cabtree/L&T)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. a) 6-32 A SP MCB (Mk.-Legrand/Schneider /Cabtree/L&T) (D-6/7)

b)63 A TP MCB (Mk.-Legrand/Schneider /Cabtree/L&T) (D-6/7)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. A)FP 63 A (Mk.-Legrand/Schneider /Cabtree/L&T) (D-5/6)

Cable for Distribution Board and other Auxiliaries:-Supply & Delivery of following size 1.1 kV.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab/ Havells/ KEI/ Gloster or as per choice of EIC] i) 4 Core 25 sqmm

Laying of cable above on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting i) 4 Core 25 sqmm (F-1/2)

Laying of cable as below, after cutting wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish i). 4 core 25 sqmm (F-3/5)

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials: i)4 core 25 sq. mm.(F-4/7(c),F-5/8 (b))

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. For First Floort. (Page-10/Item-3 of Buildings Schedule )

Air Conditioning work:-Supply and laying of 1.1 KV grade single core stranded 'PVC insulated FRLSH grade copper armoured round Cable incl socketing, shaddling etc.as per direction of EIC ( Make : Finolex/ Havells/ Polycab/ KEI / RR/ Gloster) of the following sizes from IDU Unit to ODU unit for the above mentioned AC units as per direction of EIC. i)4 core 2.5 sqmm

ii)3 core 4.0 sqmm

Supply & installation of 25 mm u-PVC Drain Pipe Line (25 mm /32 mm OD,HD 1 mm thick ) of the following size with including Tee, bend,plug, socket etc. as required and with proper supports & brackets as per direction of E.I.C. (Make: Suprime/Oriplast)

Supply, Delivery, Testing & Commissioning of split type AC machines having Cooling Capacity range (6.6 kw - 7.0 kw), Tonnage-(1.9Tr to 2.2Tr.) , with fixed speed rotary compressor, refrigerant gas R410 /R32 ,BEE star rating -3 (EER range 3.5 to 3.81), Air flow range CFM (780-850), both condenser and cooling coils made of copper tube connecting chord with 25A plug top confirming to IS 1391 (Part-I & Part-II) with all amendments (Make- O-General type:-ASGA24BMAA-B (R32)/Mitsubishi Electric/ Mitsubishi Heavy )

SITC including vaccumiazation and Nitrogen of testing of following nominal size of soft/hard drawn copper refrigerent piping forpackage/VRV/VRF/RAC system, complete with fittings, with adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class -0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required. i)5/8" (15.88 mm.) dia (Soft drawn) Cu. Pipes (As per standard BS864 or 15 ANSIB 16.22) with tube thickness 0.6 mm mm incl. 13 mm thick insulation.(Make:-Mandeep/Totaline/Godrej)

ii)1/2" (12.70 mm.) dia (Soft drawn) Cu. Pipes (As per standard BS864 or 15 ANSIB 16.22) with tube thickness 0.6 mm mm incl. 13 mm thick insulation.(Make:-Mandeep/Totaline/Godrej)

Supplying, fabrication & fixing of platform for fixing the Outdoor units of AC Machines uning M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making Base Frame for installation of outdoor unit of atleast 5 Tr. AC incl. drilling holes in each channel, cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal MS angle of 50 mm x 50 mm x 6 mm, MS flat of 50 mm x 6 mm as per direction of E.I.C. [Drawing of the Platform to be approved by the EIC before fabrication and necessary certificate to be provided as required]

Supply and fixing of 25 mm PVC flexible Drain pipe for drainage of water for Split A.C. both indoor and outdoor unit.

Earthing & GI pipe:-Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe.(G-1/ 2(a))

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.(G-2/ 3(a))

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.(G-2/ 4(a))

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.(G-3/ (5-d ))

Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required with necessary socketing/welding.(F-6/11)

Add GST @18%

Add LWC @1%

Please Enable Macros to View BoQ information