15th Finance Commission Untied Grant 2024-2025 Construction of Funeral shed at Kambarajapuram Dhroupathi Amman Kovil street in Thiruvalam Town Panchayat

Amount

Earth work excavation and depositing on bank with initial lead of 10 mts and initial lift of 2 mtrs in hard stiff clay stiff back cotton hard red earth, shales murram and gravel stoney earth and earth mixed with small size boulders SS 20 B etc. complete as per standard specification.

Supply and filling of with Good stone dust including cost and conveyance and all labour charges etc. complete

Plain cement concrete 1:4:8 (one part of cement, four part of sand and eight part of aggregate) using 40mm gauge hard broken granite jelly for foundation including cost and conveyance of all materials including labour charges for mixing laying curing watering if found necessary and laid in layers and not move than 30cm. thick etc. as per standard specification.

Supply and erecting steel centering charges for sides and sulfides including loading and unloading charges etc. complete as per Standard specification.

Supply and fabrication of steel including cost and conveyance and loading , unloading charges etc. complete as per Standard specification.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Brick work in cement in CM 1:5 (one cement five part of sand) mix using bricks size 8 ¼ x 4 ¼ x2" from approved killn including cost and conveyance of all materials including labour charges and curing etc. complete as per standard specifcation.

Ceiling Plastering with cement motor 1:3(One part of Cement, and three part of sand) 10mm thick in all floors including cost and conveyance of all materials etc. complete as per standard specification.

Plastering with cement motor 1:5 (One part of Cement, and five part of sand) 12 mm thick in all floors including cost and conveyance of all materials etc. complete as per standard specification.

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats using best quality of Emulsion paint of approved colour including cost and conveyance of all materials and labour charges.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.