Special repair of existing residential buildings No AR 308 A and B D 62 and 04 Nos Single Offr accn Bldg No ARD6774 ARD7582 ARD85

Schedule A Part-I : Special repair/maint of existing Residential Builings No. AR/308 (A&B), D/62 and 04 Nos Single Offricers Accn of HQ IGAR(N) at Kohima

Spl repair to Bldg No. AR/308(A&B) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (interior)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with acrylic Smoth exterior Paint of require shade: New Work (Two or more Coat applied @ 1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (Exterior)

Providing and laying damp- proof course 40mm thick with cement concrete 1:2:4 (1Cement: 2 Coarse sand (Zone- III) 4 graded stone aggregae 12.5mm nominal size)

Dismantting doors, windows and clerestory windows ( steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 meteres lead : of area 3 sq. metres and below

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in charge. Nomial concrete 1:3:6 or richer mix ( i/c equivalent design mix)

Providing wood work in frames of doors, window, clerestor windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding panelling which will be paid for separately, all complete as per direction of Engineer- in charge. ( Note:- Butt hinge and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCrofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm) mesh and silicon sealent shall be paid separately)

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. Comlete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement: 4 coarse sand). Light shade pigment using white cement

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 ( 1 cement: 3coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying ceramic wall tiles 600x300mm size

Providing and fixing wash basin with C.I. Brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making goof the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing toilet paper holder : C.P. Brass

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all resopect as per directios of Engineer- in- charge.

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1,70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I ( fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including prepration of surface, excluding grading, complete.

Spl repair to 01 No Type-V Qtr Bldg No. D/62 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with acrylic Smoth exterior Paint of require shade: New Work (Two or more Coat applied @ 1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Providing and laying damp- proof course 40mm thick with cement concrete 1:2:4 (1Cement: 2 Coarse sand (Zone- III) 4 graded stone aggregae 12.5mm nominal size)

Dismantting doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 meteres lead : of area 3 sq. Metres and below

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in charge. Nomial concrete 1:3:6 or richer mix ( i/c equivalent design mix)

Providing wood work in frames of doors, window, clerestor windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding panelling which will be paid for separately, all complete as per direction of Engineer- in charge. ( Note:- Butt hinge and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCrofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm)

Fixed window/ventilator made of (small series) frame 47 x 50mm & mullion 47 x 68mm both having wall thickness of 1.9 +- 0.2mm and single glazzing bead of appropriate dimension (Area upto 0.75sqm)

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. Comlete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement: 4 coarse sand). Light shade pigment using white cement

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 ( 1 cement: 3coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying ceramic wall tiles 600x300 mm size

Providing and fixing wash basin with C.I. Brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making goof the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15mm CP Brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 453x357 mm

Providing and fixing toilet paper holder : C.P. Brass

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all resopect as per directios of Engineer- in- charge

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1,70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I ( fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including prepration of surface, excluding grading, complete.

Spl repair to 04 Nos Single Offrs Accn Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer

Finishing walls with acrylic Smoth exterior Paint of require shade: New Work (Two or more Coat applied @ 1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Providing and laying damp- proof course 40mm thick with cement concrete 1:2:4 (1Cement: 2 Coarse sand (Zone- III) 4 graded stone aggregae 12.5mm nominal size)

Dismantting doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. Complete and stacking within 50 meteres lead : of area 3 sq. Metres and below

Providing wood work in frames of doors, window, clerestor windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding panelling which will be paid for separately, all complete as per direction of Engineer- in charge. ( Note:- Butt hinge and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCrofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) . Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 ( 1 cement: 3coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1,70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade I ( fibre base self finished bitumen felt) six and final courses of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including prepration of surface, excluding grading, complete.

Schedule A Part-II : Special repairs of existing residential accommodation building No. AR/D/67-74, AR/D/75-82, AR/D/85(A-H) , D/93 (A-H and D/94(A-H) of HQ IGAR(N) at Kohima

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including sand papering and preparing the surface.(One or more coat Internally) (32 Nos Type-II Qtrs)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including sand papering and preparing the surface. One or more coat Internally) (16 Nos Type-III Qtrs)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work to doors/ windows etc

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth for repair only on damaged portion before applying (Internally on damaged portion)

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two coat) applied @ 1.67 ltr/ 10 sqm) on existing painted surface incl sand papering & preparation of surface smooth (Dulux Promise)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made for required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth for repair only on damaged portion before applying paint.(External Walls on damaged portion)

Providing 15 mm thick cement plaster with cement mortar 1:4 on damaged portion ( External Wall on damaged portion)

Repair and Water Proofing Treatment Of Sunken Slab (incl dismantling of existing fllor with tiles, IWC seat with traps, Water proofing treatment to Sunken floor with APP sheet, and providing & fixing IWC seat with trap, Flushing cistern, Non Skid Floot tiling and necessary sweage pipe line connection with 110 mm PVC (SWR) pipes etc complete)

Providing and fixing on wall face unplasticised Rigid PVC pipes , including jointing with seal ring110 mm diameter For replacement of sewage / waste pipe

Providing and fixing on wall face unplasticised - PVC moulded Coupler 110 mm dia

Providing and fixing on wall face unplasticised - PVC moulded Single tee with door 110x110 x110 mm

Providing and fixing on wall face unplasticised - PVC moulded 110 mm bend/Elbow

Providing and fixing unplasticised -PVC pipe clips of approved design 110 mm

Providing and fixing to existing door frames 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures.

Schedule A Part-III: Special repair to Existing residential building No. AR/OH/08 of HQ IGAR(N) at Kohima

Special repair to existing residential building No. AR/OH/08 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Earth work in excavation manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m.

Providing PCC 1:4:8, 75mm thick.

Poviding RCC 1:2:4 as in col upto plinth level.

Providing RCC 1:1.5:3 as in Col & Lintel,FB &RB above plinth level.

M/L for formwork to sides of column.

M/L for formwork to sides of lintel.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete. TMT bars

Brickwork in full brick thick in CM 1:6.

M/L for 15mm thick cement plaster of mix in CM 1:4 on internal/ external walls.

RCC 1:1.5:3 in Slab/ suspended floors

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size 600x600 mm .

Woodwork in trusses. Kiln seasoned and chemically treated hollock wood

Fixing only precoated galvanised iron profile sheets fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete

Wooden chawkats for doors of hollock wood

Flush door decorative type 35mm thick.

Providing and fixing aluminium sliding door bolts, ISI marked anodised, 300x16mm size

Providing and fixing aluminium tower bolts, ISI marked, anodised, 300x10mm

Providing and fixing chromium plated brass handles with necessary screws etc. 125 mm size

Providing and fixing aluminium hanging floor door stopper

Aluminium framework for windows using alu beam 63.50x38.10 mm.

Aluminium framework for window shutters using alu channels 40x 25mm.

Glazing in alu windows using 5.50mm thick float glass.

Aluminium tubular handle bar for windows.

Providing wood work in frames of false ceiling. sawn and fixed in position with necessary steel screws etc.Kiln seasoned and chemically treated hollock wood

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling,Flat surfaces

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying two coats of oil bound washable distemper on walls over a coat of water thinnable cement primer

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade, Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface including scrapping, sand papering and preparing the surface smooth

Sewage Disposal for building No. AR/OH/08 Construction of 50 users septic tank as per specification and drawing No. STD/Engr/ IGAR(N) /09

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ,Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter incl providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete

Providing, laying and jointing glazed stoneware pipes class SP-1with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter metre incl providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete

Rewiring of building No. AR/OH/08 M&L point wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 Sqmm FR PVC insulated copper conductor single core cable in surface PVC casing and capping with Piano type switch, phenolic laminated sheet, suitable size PVC box and earthing the point with 1.5 Sqmm FR PVC insulated copper conductor single core cable etc as required. (Detailed electrical inventory attached)

Wiring for socket outlet 5 Amp inpendent alongwith earth wire with 2x2.5 Sqmm insulated copper conductor and 1.5 Sqmm earth wire in PVC casing and capping

Wiring for power plug with 2x4 Sqmm FR PVC insulated copper conductor single core cable in surface PVC casing and capping alongwith one No 4 Sqmm FR PVC insulated copper conductor single core cable for loop earthing as required.

Supply and fixing 3 Pin 5/6 Amp socket outlets including switch box and connections etc as required.

Supply and fixing switch 5/6 Amp including connections etc as required for socket outlets.

Supply and fixing 15/16 Amp switch including connections as required 1.23.3 15/16 amp switch.

Supply and fixing 6 Pin 15/16 Amp socket outlet incl switch box and connections etc as required.

Supply and fixing 6 Pin 15/16 Amp socket outlet incl switch box and connections etc as required.

Supply and fixing 2+4 Way single pole in neutral MCB distribution board 240 V complete with tined copper bus bar, neutral bar, earth bar, din bar, inter connections powder painted including earthing etc as required.

Supply and fixing 5 Amp to 32 Amp ratting, 240/415 V “C” curve, single miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as require

Supply and fixing double pole 240 V 40 Amps isolator in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supply and fixing LED Square Ceiling light fittings 12 Watts of Havells/ Phillips (HSN Code-9405).

Schedule A Part-IV : Special repair, replacement and maint of joineries, roof treatment, Seepage treatment, built in CB, doors, windows incl replacement of fitment & internal wiring to existing resdl bldgs of HQ IGAR(N) at Kohima

Repair & Replacement of joineries, roof treatment etc Providing and fixing factory made steel glazed windows and ventilators, side /top /centre hung, with beading and all members complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete,Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with :4.0 mm thick glass panes

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge.

Providing and fixing wire gauge shutters 35 mm thick using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, with hinges and necessary screws : Kiln seasoned and chemically treated hollock wood .

Providing and fixing ISI marked flush door shutters conforming to IS : decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws

Providing and fixing flush door shutters 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges with necessary screws

Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised 150x10 mm

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets, 25 mm dia (heavy type)

Demolishing cement concrete manually including disposal of material within 50 metres lead as per directionof Engineer - in - charge.

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) with 3% Dr Fixit M-80 water proofing compound (Avg-40mm thick)

Supply only water proofing compound Dr Fixit M-80

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. 3 mm thick.

Repairs to plaster of thickness 12 mm to 20 mm with 1:4 cement mortet, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including sand papering and preparing the surface.(One or more coat Internally)

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two coat) applied @ 1.67 ltr/ 10 sqm) on existing painted surface incl sand papering & preparation of surface smooth (Dulux Promise)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth for repair only on damaged portion before applying painting

Providing and fixing Non-Skid floor tiles 300x300 mm size laid on 20 mm thick cement morter 1:4 including grouting the joints with white cement and matching pigments

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size,well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Repair of Sunken Floor Treatment Repair and Water Proofing Treatment of Sunken Slab (incl dismantling of existing fllor with tiles, IWC seat with traps, Water proofing treatment to Sunken floor with APP sheet, and providing & fixing IWC seat with trap, Flushing cistern, Non Skid Floot tiling and necessary sweage pipe line connection with 110 mm PVC (SWR) pipes etc complete)

Repair of Internal electrification M/L for point wiring One light point or One fan point controlled by one switch with 1.50 Sqmm PVC sheathed stranded copper conductor cable in PVC casing capping

M/L for power point wiring with 4 Sqmm PVC sheathed stranded copper conductor cable in PVC casing capping

S/F switch piano flush button single pole one way 5 amps

S/F Socket out let 3pin 5 amps ,flush type

S/F switch Socket outlet 6 pin 15/16 amps ,flush type

S/F switch fuses, iron clad or of sheet metal TP fused and neutral link 32 amps 415 volts

S/F Board distribution , iron clad or of sheet metal SP fused and neutral link 32 amps 415 volts, 4 way

S/F brass batten lamp holder with back plate

S/F PVC rectangular block 25 Cmx20 Cmx 5Cm depth closed recessed.

S/F PVC rectangular block 20 Cmx15 Cmx 5Cm depth closed recessed.

S/F Ceiling rose , surface bakelite, 65x 50 mm , two to three terminals.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker, Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker, Single pole and neutral

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,"C" curve, miniature circuit breaker, Double pole

Supplying and fixing following rating, double pole, 240 volts,isolator in the existing MCB DB complete with connections,testing and commissioning etc.63 amps

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. (But without MCB/ RCCB/Isolator) 4 way (4 + 12), Single door

M/L for earthing complete with galvanized steel earth lead electrode 60 Cm x 60 Cm x 6.3mm thick, buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less 1.50 meter below normal ground level , connected to galvanized earth lead 25 x 5 mm GI strip by means of bolts, nuts, check nuts and washers all as shown in electrical plate No.5 and testing on completion.

M/L for earthing chamber with PCC 1:2:4 type B1 incl earth work in excavation , GI watering pipe, funnel , wire mesh and CI cover etc all complete.

S/F LED Tube light fitting complete set 1x 22 watt

S/F Bulk Head light fitting (LED-18 watt) complete set

Replacement of water supply & sanitary fittings Dismantling asbestos cement /PVC pressure pipes including excavation and refilling trenches after taking out the pipes manually/ bymechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge : Up to 150 mm diameter

Cleaning of chocked sewer line by mechanically or manually through skilled labours etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

S/F PVC (SWR) pipe single socketed in any length : 110 mm dia laid in trenches

S/F PVC (SWR) pipe single socketed in any length : 75 mm dia laid in trenches

Cleaning of Septic Tank by mechanical means 7,500 ltrs capacity including removal of Sludge up to 800 mtrs lead / out side of the KMC area as directed.

Labour Only for cleaning of Manholes 0.60x0.60 x 0.45m size internally by manually including removal of Sludge up to 100 mtrs lead in earth Pits directed.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel kitchen sink as per ISI with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White .

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing & fixing CP Health Faucet with hose & hook . (Make Parryware- T9961 A1)

Providing & fixing CP two way bib Cock 15 mm for fixinf Health Faucet . (Make Parryware / Sona)

Providing & fixing CP Sink Mixer wall mounted . (Make Parryware- G1435A1)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing & fixing Glass Corner shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. Make :- Sona

Providing & fixing CP overhead Shower (Make Parryware- T9904 A1)

Providing & fixing Vitreous China European Type Water Closet with flusing cistern . (Make Parryware- Duke)

Providing & fixing CP Wall Mixer incl provn for overhead shower (Make Parryware/Jacqure)

SCHEDULE ‘A’ PART-IV (SCHEDULE OF CREDIT)

UNSV Door/window shutter incl frame more than 190/each

UNSV door shutter more than Rs 50/each

UNSV steel shutter more than Rs 15 KG

UNSV Angle/ T iron more than Rs 15/Kg

UNSV flush door shutter more than Rs 135

UNSV M S Fitting more than Rs 15/KG

UNSV Bib/Stop/Angle more than Rs 20/Each

aarav enterprises

GAUTAM ENTERPRISES

Aien Meren Enterprises