PROVISION OF GE OFFICE AT ICGS RATNAGIRI

Amount

Schedule A Part I to Part XII)

Total amount of Sch 'A' Part-I (Buildings & Structures)

Total amount of Sch 'A' Part-II (SITE CLEARANCE, EXCAVATION & EARTH WORK )

Total amount of Sch 'A' Part-III (DEMOLITION)

Total amount of Sch 'A' Part-IV (INTERNAL WATER SUPPLY)

Total amount of Sch 'A' Part-V (EXTERNAL ELECTRIC SUPPLY)

Total amount of Sch 'A' Part-VI (ROAD, PATH & CULVERT)

Total amount of Sch 'A' part-VII (SEWAGE DISPOSAL)

Total amount of Sch 'A' part-VIII (AREA DRAINAGE)

Total amount of Sch 'A' part-IX (COMPOUND WALL & GATE)

Total amount of Sch 'A' part- X (CHAIN LINK FENCING)

Total amount of Sch 'A' part-XI (EXTERNAL WATER SUPPLY)

Total amount of Sch 'A' part- XII (EXTERNAL ELECTRIC SUPPLY)

Sch 'A' Part- XIII (MISCELLANEOUS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Soil Investigation: (A) Drilling 100mm dia bore in soil and NX size (75mm) dia in rock up to a depth of 06mtr from GL including conducting SPT, collection of disturbed/ Undisturbed soil samples as well as rock core samples at variuos depth from GL as directed by Engineer- in- Charge and as per relevant code (B) Submission of soil Investigation report in Quadruplicate consists introduction & object investigation, scope of work and project details, feild tests, suggetion for improvement of SBC, if any settelement criteria/ calculation incorporating type of soil in Pressure bulb zone, Higest water table, SBC recommendation at perticular depth considering water table, type of foundation to be adopted, all test results, bore log charts, profile of Log and safe bearing capacity calculations at various depths

S & F modular type 1 module RJ 11 telephone socket with shutter including Modular metal flush box, Modular white plate covercomplete all as specified and directed Make: Legrand Arteor Cart-Part No. 5734 26 or equivalent model of Precision or other make approved by GE

S&F 40W surface/wall mounted LED batten having high efficiency long life LED chips with luminious efficiency of >100 lumen/W, Conforming to IS 15885(Part2/sec-13):2012 polycarbonate diffuser, extruded Aluminium housing and white colour ABS end caps having input voltage 220-240V 50-60Hz PF>0.95. complete all as specified and directed. Make: Bajaj cat no BLTRU40WNW VIVA or equivalent model in Philips / Havells/Wipro

S&F 20W surface/wall mounted LED batten having high efficiency long life LED chips with luminious efficiency of >100 lumen/W, Conforming to IS 15885(Part2/sec-13):2012 polycarbonate diffuser, extruded Aluminium housing and white colour ABS end caps having input voltage 220-240V 50-60Hz PF>0.95. complete all as specified and directed. Make: Bajaj cat noBCLAB 20W or equivalent model in Philips / Havells/Wipro

S&F 10W surface/wall mounted LED batten having high efficiency long life LED chips with luminious efficiency of >100 lumen/W, Conforming to IS 15885(Part2/sec-13):2012 polycarbonate diffuser, housed in Aluminium channel housing and white colour ABS end caps having input voltage 220-240V 50-60Hz PF>0.95. complete all as specified and directed. Make: Bajaj / Philips/ Havells/Wipro

S&F 45W LED Street Light, pressure die cast housing, prismatic polycarbonate difuser, LEDs with secondary optics and IP65 Protection complte all as secified and directed Make: Bajaj Cat No: BRTFG 45W LED I or Equivalent in Wipro/Havells/Halonix

Supply, Hanging and connecting up energy efficient five star rated ceiling fan of size 1200 mm sweep complete with stepped type electronic regulator and down rod including provision of flexible copper cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3 mm thick circular Bakelite sheet cover including writing MES NO. 2 CM height with synthetic enamel black paint all as specified and as directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S&F and connecting up metalic exhaust fan (for Kitchen) 300mm sweep, 900 rpm, heavy duty single phase 240 volts AC 50 Hz and connecting up complete including louvres and including provision of cable 3 core, 0.5 Sqmm multi-stranded copper conductor PVC insulated and PVC sheathed flexible wire from ceiling rose to fan all as specified and as directed. Including writing MES NO. 2 CM height with synthetic enamelled black paint all as specified and as directed. Make: Crompton Trans air 300 or equivalent model of Usha, Havells or BAJAJ

S&F and connecting up non-metallic fresh air fan (For toilet) 250mm sweep,Delivery not less than 860CMH, heavy duty single phase 240 volts AC 50 Hz and connecting up complete including louvres and including provision of cable 3 core, 0.5 Sqmm multi-stranded copper conductor PVC insulated and PVC sheathed flexible wire from ceiling rose to fan all as specified and as directed. Including writing MES NO. 2 CM height with synthetic enamelled black paint all as specified and as directed. Make: Crompton VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S & F MCCB, 4P, 100 Amp with Icu = 16 KA at 415 volts with thermal magnetic release conforming to IEC 60947 Part-I/IS-13947- Part-I with breaking capacity Ics = Icu at 415 volts of 16 KA, thermal overload setting 70% to 100%, short circuit setting 5 to 10 times -05 Nos. (As out goings for GF, FF, SF and spare) Make: Havells Cat No.IHLGHF0100 or equivalent in Legrand/Indoasian/Schneider.

S & F for MCB TP 415 volt C curve of 32 Amps capacity complete all as specified and directed. Make:Havells Cat No DHMGCTPE006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB TP 415 volt C curve of 16 Amps capacity complete all as specified and directed. Make:Havells Cat No DHMGCTPE006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB TPN 415 volt C curve of 16 Amps capacity complete all as specified and directed. Make:Havells Cat No DHMGCTNF006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB TPN 415 volt C curve of 32 Amps capacity complete all as specified and directed. Make:Havells Cat No DHMGCTNF006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB SP 240 volt C curve of 16 Amps capacity complete all as specified and directed. Make:Havells Cat No.DHMGCSPF006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB SP 240 volt C curve 10 Amps capacity complete all as specified and directed. Make:Havells Cat No.DHMGCSPF006-032 or equivalent in Legrand/Indoasian/Schneider

S & F for MCB SP 240 volt C curve 6 Amps capacity complete all as specified and directed. Make:Havells Cat No.DHMGCSPF006-032 or equivalent in Legrand/Indoasian/Schneider

Supply, fixing and connecting up complete as MCCB incomer VTPN DB 6 way, double door, 415 V, AC, 50 Hz with minimum IP-43 - IK 09 protection conforming to IS-13032 & 8623, universal mounting with copper bus bar, neutral link, earth link, earthing studs, detachable gland plates etc all as specified and as directed. (Make: Legrand Cat No.5077 26 or equivalent in ABB/SCHNEIDER/L&T).

Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6.3 mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DB's, by means of bolts, nuts, check nuts, and washers made out of GI all as shown on plate No. 3 of SSR Part I to the extent applicable to this item including necessary excavation earthwork , PCC 1:3:6 Chamber, RCC 1:2:4 cover 50mm thick with 6mm CTD bar 100mm centre to centre, watering pipe medium grade 20mm bore, funnel, wire mesh, etc., and testing on completion all as specified and as directed. Note: The quoted rate shall be inclusive of GI wire upto DBs .

EXTERNAL WATER SUPPLY: M & L for cutting the existing GI pipe of size up to 100mm dia and inserting GI tee of size 80 x 80 x 50mm dia for taking branch connection etc complete

M & L for construction of Block masonry Valve pit chamber of size 60 x 60 x 60cm (internal) complete with 6mm thick MS plate cover and 50 x 50 x 6mm angle iron frame duly painted with two coats of synthetic paint over a coat of red oxide primer including locking arrangements

EXTERNAL ELECTRICAL SUPPLY: M & L Factory made Swan neck Octagonal/ rounded steel tabular swaged poles complete with cast iron base plate, finials taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.00Mtr Long) (Note: Earth work and PCC shall be measured and paid seperatly under respactive items)

M&L for earthing with 600x600x 6mm GI earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including GI earth strip of size 32 x 6 mm by means of brass bolts, nuts and check nuts and washers of galvanized iron steel all as shown in electrical plate No.3 of MES SSR part-I 2009 and incl excavation, disposall of soil, providing charcoal dust and common salt upto 15cm above the edge of earth plate, construction of PCC pit in 1:3:6 type B-1, 20mm thick precast RCC cover (1:2:4) reinforced with 8 mm dia TMT bars @ 10 cm C/C on both ways and handle and 20mm dia light grade G.I. Pipe and 40mm dia pipe for earth lead protection upto 7.50m length (Beyond 7.5mt will be measured & paid seperatly and testing complete all as specified and directed.

S & F Street light 70/75W LED luminaries pressure die- cast aluminum IP65 luminaries with high power LEDs with toughened glass fitted to 32mm dia light grade tube brackets and fixing on walls/ pole complete all as specified and direcetd by Engineer-in- Charge. (Make: Havells/ ENDURA CITY LINER NEO BAJAJ LED Edge plus , Model No BRLEP72WLEDV2)

S & F moulded PVC junction Box of size 120 x 70H with fixed MCB SP for 6Amp for street light poles complete all as specified and direcetd by Engineer-in- Charge.

Supply, installation, test and commissioning of out door type cubical type LT panel suitable for 415 volts 3 phase 4 wire system floor mounted factory made double door dust and vermin proof fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame of size 50 X 50 X 6 mm thick, with front and back openable,double door system lockable/ openable by keys complete comprising of following:- (a) MCCB 100 Amps 16 KA,Thermal magnetic - 01Nos (b) MCCB 40Amps, 16KA at 415 Volts– 03 Nos (2 outgoing, 1 spare) (c) MCB SPN 25Amps – 04 No (Street lights, MT garrage, Parking shed) (d) Insulated painted high conductivity aluminium bus bar 4 strip 1.5 times of incoming and outgoing MCCB/ MCB for 3 Phase and for neutral (e) Digital Amp/ Votl meter with ASS and VSS and CTs for measuring the current voltage..etc complete - 01 Nos (f) Indicating lamps LED type, 230 Volts for RYB including all necessory arrangements - 03 Nos (g) Complete wiring of the panel with 2.5 Sqmm copper conductor multi stranded

50 users RCC Septic tank, conventional type -Excavation in soft disintigrated rock, PCC 1:4:8 for bed,Laterite masonry in walls,base slab,baffle walls, and roof slab with effective depth 1.50m and overall depth 3.00m all as per drawings

Soakage well - Excavation in soft/ diintigrated rock, PCC 1:3:6 foundation, walls of honey combed masonry in CM and RCC M-25 Design mix, in cover slab complete filled with brick batts of size -3 m dia x 3m depth all as per drawings

PUSHPA INFRACON

SLB Enterprises

M/S V C SHETH

NSC Projects Pvt. Ltd.

Modern Engineering Co

A2Z ENGINEERS AND PILE FOUNDATIONS

CREATIVE BUILDERS