Construction of Multi Purpose Hall/Community Hall At- Satbahini Tirth Sthal, Kandi, Garhwa.

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Extra for earthwork in hard soil as per specification and direction of E/l (vide classification of soil item-B)

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : (1:2:4) ( 1 Cement :2 Coarse Sand (Zone III) : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level : (1:3:6) ( 1 Cement :3 Coarse Sand (Zone III) : 6 graded stone aggregate 20 mm nominal size).

Providing and laying in Position cement concrete of specified grade excluding the cost of centring and shuttering -All work up to plinth level : 1:1/2:3 (1 Cement: 1/1/2 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing Designation 100A 112 mm thick reinforced B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:4) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including the cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Reinforced cement concrete work in beams, suspended floors, roof having slope up to 15 landings, balconies, shelves, chajja, lintels, bands, Plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding the cost of centring, shuttering, finishing and reinforcement, with 1:1:5:3 (1 cement: 1.5 coarse sand (Zone - III) : 3 graded stone aggeragate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilaster, coloumns, piers, abtuments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain windows sills, fillets, sunken floor etc. up to floor five level, excluding the cost of centring, shuttering and finishing. 1:1 1/2:3( 1 Cement :1 1/2 Coarse Sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

Providing Tor steel reinforcement of 8 mm dia rods & 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l.

Providing Tor Steel reinforcement of rods 10mm. ,12mm & 16mm dia. bars as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rod all complete as per building specification direction of E/I

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/l.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Labour for laying, fitting and fixing NP2 R.C.C spu pipe with c olars in lines, level and grade and providing approved jointing materials and joints properly filled to make them lead, proof including providing sight

Supplying of 150 mm dia NP2 hume pipe --do-- all complete E/I

C.I Cover with frame for Manhol chamber

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mmdiameter, 1.8 m long complete as per standard design.

HYDT: Cost of Drilling 200 mm x 165mm 125 meter deep bore well in all kinds of soil and rock in Rural area for installation of pumps set with Hydraulic DTH Rin machine all complete including supplying all materiuals tools, drilling rig. Air Compressor and Equipments as well as fuel lubricants and cost of TRransportation of Rig Machine and other Vechile up to site (i) From 0.0M to 50.0 M

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all omplete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in- charge.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing and fixing factory made P.VC. door frame of size 50x47mm with a wall thickness of 5 mm, made out of extrude 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing and fixing 30mm thick factory made PVC rigid foam panelled door shutters made from M.S. tube of 19 gauge thickness, size 19x1 9mm for styles and 15x1 5mm for top and bottom rails, covered with heat moulded PVC "C" channel of 5mm thick sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, panelling of 5mm thick PVC sheet fitted in the M.S. frame welded/ sealed to the styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesive etc., complete as per manufacturers specification and direction of Engineer-in-Charge fixed to frames with 4 Nos. M.S. powder coated butt hinges ( For W.C. and bathroom shutters)

Providing and fixing made UPVC white colour sliding glazed window upto 1.50 mm in height dimension comprising of UPVC multi chambered frame with in built roller track and sash extruded profiles dully reinforced with 1.60+ 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile) appropriate dimension of UPVC extruded glazing beads ...

Providing and fixing stainless steel ( rade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and applying plaster of paris (POP) putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over theplastered wall surface to prepare the surface even and smooth complete

Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours, shades such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vetrified Paring/industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :4457:207, of approved make in all colours shade , laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg sqm including grouting the joints with white cement and matching pigments etc. complete size. of Tile 300x300x10 mm size

Providing and laying 20mm thick white makrana marble tiles in risers of step, skirting and pillars of approved quality over 12mm thick base of cement mortar (1 :3) and jointed with white cement slurry including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and fixing 18 mm thick gang saw cut mirror polsihed premoulded and prepolishe) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1: 4 91 cement : 4 coarse sand) with joints treated with white cement, mised with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement comound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green, Overlaps ofjoints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of sluurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air

Covering of treated surface with PCC :- Providing 25 mm PCC thick Cement Concrete M20 (1:1:5:3) maintaining slopein alternate 2 mt x 2 mt panels with approved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F.M. 2.5 to 3 including screening, shuttering and mixing cement concrete in mixer with admixture of integral water proofing and placing in position , striking curing, taxes and royalty all complete as per building specification and direction of E/I. Panels that has been left should be casted next day. There should be 6mm gap betsween panels. Brand Sika_Plastocrate Plus, MYK Proof WP10 , Fosroc - conplast X 421 ic.DR. Fixit Pidiproof LW+

Providing and filling 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealent ( Poring grades) as per drawings and technical specifications and direction of E/I (with 18% GST) Brand : Sika- Polyshulphide, Fasroc-Thieoflex 600, Dr. Fixit Pidiseal PS (42P)MYK Seal, PS of EQuivalent

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion (i) single socketed pipes .110 mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A including jointin with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion

Coupler 110 mm dia

Bend 110 mm

Shoe 110 mm

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 X 50 X 50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar (1: 4) and making good the wall etc. complete : 110 mm dia

Point wiring in PVC conduit, with modular type switch

Twin Control Point wiring in PVC conduit, with modular tyupe switch :- Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor

S/F CELLING ROSE :- Supplying and fixing 2 pin 5amp, celling rose

15/16 Watt Led Bulb

1 x 28 watt T5 tube light fitting

Ceilling Fan 48" (1200 mm)

12" (300mm) metal exaust fan

Bulk head fitting with 9/10 Watt CFL/LED

ITC flubrescent fittiing directlyu on surface:- Installation testing and commissioning of pre wired flourescent fitting/compact flourescent fitting of all tyhpes socmpete wirth all accessories and tube etc. directly on ceilling/wall including connection with 1.5 sq. mm FR PVC insulated copper conduit as required

ITC Ceilling fan:- Installation testing and commissioning of ceillin fan, including wirint the down rods of standard leanth (up to 30 mm) with 1.5 sq. mm FR PVC insulated copper dconductor single core cable etc. as required

ITC Exahust fan upto 450 mm sweep:- installation of exhaust fan opto 450 mm sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage connection testing commissioning etc as required

S/F Batten holder:- Supplying and fixing battrn/angle holder including connection etc as required

S/F Modular type switch/socket:- Supplying and fixing following modular type switch/ socket on the existing modular plate and switch box including connection but

5/6 amps one way switch

5/6 amps, 3 pin socket outlet

S/F power plug point with piano type accessoires:- Supplying and fixing suitable size G.I box with modular plate cover in front on surface or in recessed including providing and fixing 6 pin 15/16 amps modular socket outlet

S/F rewireable double pole/TP&N switch disconnector:- Providing and fixing following capacity double pole/TP&N sheet metal switc disconnector fusel unit in existing metal board with rewireable tyhpe fuses including drilling holes

32 amps double pole

S/F 'C" Serise MCB:- Supplying and fixing 240 volts "C" series minature circuit breaker suita ble for inductivbe lads of following poles in the existing MCB DB complete with connections testing and

6/32 amps single pole

40 amps DP

S/F S.P MCB DB: Supplying and fixing following way single pole nutral, sheet, MCB distribution board, 240 volts on surface/recess complete with tinned copper busbar , nuturablbusbar, earth bar, din bar, detchable gland plate interconnection phosphate and powder painted

4 way single door

6 way single door

8 way single door

Circuit/Sub main wiring in PVC conduit: Wiring for circuit/sub main wiring along with earth wire with the following size PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required:

2x1.5 sq. mm + 1x1.5 sq.mm earth wire

2x2.5 sqmm + 1.X2,5 sq mm earth wire

2x4.0 sq.mm + 1x4.5 sq mm earth wire

2x10 sqmm + 1x10 sqmm earth wire

S/V PVC/G.I boxes :- Supplying and fixing PVC/G.I box of following sizes on surface or in recessed with suitable size of phenolic laminated sheet cover inforont including paintin etc as required

75 mm 75 mm 50 mm deep / (4"x4")

72mm x 146 mm x 48 mm deep / (4"x7")

210 mm x 206 mm x 48 mm deep/ (10"x12")

S/F/ S.P MCB DB: Supplying and fixing following way single pole nutral, sheet, MCB distribution board, 240 volts on surface/recess complete with tinned copper busbar notralbusbar earth bar din bar

4 way Double door

16 wayDouble door

S/F Modular type Electronic Fan Regulator:- Supplying and fixing following modular type electronic Fan Regulator on the existing modular plate and switch box including

S/F Mopdular type blanking plate:- Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate etc as required

S/F SP MCB blanking plate:- Supplying and fixing Single pole blanking plate nexisting MCB/DB complete etc as required

S/F HRC Fuse Type TP&N switch disconnector :- Providing and fixing following capacity double pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with ISI marked HRC fuses, including drilling holes in

TP&N HRD 200 A

S/F Panel montude changer over:- Providing and fixing following capacity 4 pole panel mounted change over switches in existing cubolle panel board making connectiuon earth

Change over switch 4 Pole 200 A

S/F Busbar Chamber :- Providing and fixing following capacity busb ar chamber with 4 strips of suitable size made of copper heavy duty, complete with all accessories including connections, earthing the body etc as required

Busbar 4 pole 100 A

Busbar 4 pole 200 A

S/F HRC Fuse Type TP&N switch disonnector : Providing and fixing following capacity double ple/TP&N sheet metal switch disconnector fuse unit in existing metal board with ISI

200 A Main Switch TP&N HRC

S/F DP MCB Isolator :- Supplying and fixing following rating, double pole, 240 volts, isolator n the existing MCBDB complete with connections testing

S/F S.P MCB DB:- Supplying and fixing following way single pole nutral, sheet, MCB distribution board, 240 volts on surface/recess, complete with tinned copper busbarm nutralbusbar, earth bar, din bar detachable etc as required (But without MCB/RCCB/Isolator)

4 WAY (4+12) Single door, TPN DB

S/F 'C' Series MCB:- Supplying and fixing , 240 volts 'C' series piniature circuit breaker suitable for inductive bads of followint poles in the existing MCB DB com,plete with connections testing and commisioning etc as required

6/32 amps TPN

S/F rewireable double pole/TP&N switch disonnector: Providing and fixing following capacity double pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable types fuses, including drilling hles metal board, amking connections etc as required 16 A Main Switch DP

S/F HRC fuse type TP&N switch disconnector:- Providing and fixing following capacity double pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with ISI : TP&N HRC 63 A

Cooper earth plate electrode:- Earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonary enclours with cover plate having locking arrangement and

supply and laying 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including solding etc as required.

providing and foixing 25mmx5mm G.I strip in 40 mm dia G.I pipe from earth elactrode including connection with G.I nut,bolt,spring,washer excavation and re-filling etc. as required.

S/L 25mmx6mm G.I earth strip in ground : Supplying and laying 25mmx6mm G.I strip at 0.50 meter below grounds as strip earth

P/F G.I lighting conductor final : Providing and fixing of lighting conductor final made of 25 mm dia 300 mm long G.I tube having single prong at top with 85 mm dia 3 mm thick G.I base plate

Reverting sweating and soldring lighting conductor tape:- Reverting sweating and soldring of copper/G.I tape (with another copper/G.I tape base of the final or any another metalic object) as

P/F G.I lighting conductor tape in horizontal run:- Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required (for horizonal run)

P/F G.I lighting conductor tape in horizontal run:- Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required (for vertical run)

P/F Testing joint for G.I lighting conductor:- Providing and fixing testing joint 20 mm x 3 mm thick G.I strip 125 mm long, with 4 nos. of tinned brass bolts, nuts, check nuts and spring washers etc. complete as required

P/F G.I earth tape for lighting conductor :- Providing and laying G.I tape 32 mm x 6 mm from earth electrode directly in grounds as required

35 sq. mm 3.5 core

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 35 sq mm but not exceeding 95 sq mm direct in ground inluding excavtion, sand cushioning,protective covering and refilling the trench etc as required.

Providing and fixsing Gun metal full way valve of approved quality all complete as per specification and direction of E/I

25 mm dia weight not less than 500 gram

40 mm dia weight not less than 1.0 kg

Cutting chajja or cronice for laying G.I pipe and restoring the same with R.C.C (1:2:4)0 brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of Engineer-in-charge

Making holes in walls for laying G.I Pipes and restoring the same after pipe laying as per specification and direction of E/I

125 mm thick wall

250 mm thick wall

Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. 12.5 lt low level C.I Cistern

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. With 12.5 lit low level PVC Cistern

Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.

Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of "Hindustan" " Parry" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. Flat back or standard corner (600x350mm)

Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of E/l.

125 mm thick wall

250 mm thick wall

Earth work in exavation for laying of RCC spun pipes with disposal of excavated earth within lintal lead and lift as pedr specification and direction of E/I (for classfication of soil items A) = 30.00 x 0.30 x 0.45 = 8.10 m3

Supplying labours, tools and tackies for testing of laid R.C.C spun pipes specified lead water all complete as per specification and direction of E/I (water to be supplies free of cost departmentally 225mm dia

Supplying laying fitting and fixing NP2 R.C.C spun pipes ….. All complete as per direction of E/I (250 mm dia

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion (i) single socketed pipes .

75 mm dia

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with amps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm nominal dia Pipes

40 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with onestep CPVC solvent cement and the cost of cutting chases and makinggood the same including testing of joints complete as per directionof Engineer in Charge.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

Providing and fixing PTMT grating of approved quality and colour.

100 mm nominal dia

125 mm nominal dia with 25 mm waste dia

Polythenbe water storage tank of ISI mark (eg sintex/sinter/himgiri/hangotri etc with cover & Locking system

Supply Fitting and Fixing the following items complete with all materials as per specification and direction E/I Miirror of 6mm thick plate glass bevellved edge mirrir inculding C.P brass revolving fitting 3mm ply wood board and C.P hinges to with mirrior (600mmx450mm)

Providing and fixing PVC Pipe fitting with all accessories (Supreme make )

75 mm Coupler

110 mm coupler

75 mm Single Pushfit coupler

110 mm Single Pushfit coupler

110 mm Single tee with door

75 mm Single tee with door

110 mm Single tee with door

75 mm single tee without door

110 mm single tee without door

75 mm bend

110 mm bend

75 mm shoe

110 mm shoe

Carriage of Materials

Sand Lead 10 Km

Stone Chips lead 22 Km

Brick Lead 8 Km

Fly Ash Brick 10 km

Stone Metal Lead 22 Km

Add 12 % GST

Add 1% Labour Cess

ARVIND TIWARI